Compaq AlphaStation ES40 - World Wide QuickSpecs

Overview

Compaq AlphaServer ES40
Compaq AlphaStation ES40

1.
PCI Cards
6.
6-Bay disk drive storage cages

2.
Fans
7.
Control Panel

3.
Diskette drive
8.
Fans

4.
Removable media bays
9.
CPUs

5.
CD-ROM drive
10.
Memory

At A Glance

AlphaServer/AlphaStation ES40 Systems include:

Alpha 21264 68/833-MHz CPU with 8-MB L2 Dual Data Rate Cache
6-10 64-bit PCI I/O expansion slots
512-MB, 1-GB, 2-GB, or 4-GB memory options (AlphaServers)
512-MB memory option (AlphaStations)
1.44-MB diskette drive
600-MB 48X IDE CD-ROM drive
Two 9-pin serial ports
One 25-pin parallel port
RMC dedicated serial port, 6-pin MMJ connector
Dual USB ports
Keyboard and mouse port
Knockouts for two 68-pin SCSI connections
Auto-sensing power supply
Integral remote system management console
Customer documentation
Tru64 UNIX or OpenVMS Factory Installed Software
90-day software warranty
Protected by HP Services, including three-year hardware warranty, on-site with 5 x 9 next business day response

Standard Features

Processor	Alpha 21264 68/833-MHz CPU

Cache Memory	8-MB L2 Dual Data Rate Backup Cache (68/833-MHz CPU)

Upgradability	Supports additional processors and upgrades of memory and hard drives

Memory	Minimum	512 MB – AlphaServer ES40 Model 1 512 MB – AlphaStation ES40 1 GB – AlphaServer ES40 Model 2
	Maximum	16 GB (16 DIMM slots) Model 1; 32 GB (32 DIMM slots) Model 2 (see Step 3)

Network Controller	Choice of Ethernet controllers

Expansion	PCI I/O slots	6 slots Model 1; 10 slots Model 2

Storage	Diskette Drive	1.44-MB diskette drive in dedicated slot
	CD-ROM	600-MB 48X IDE CD-ROM
	Hard Drives	Choice of 18.2-GB, 36.4-GB, 72.8-GB, or 146-GB drives

Interfaces	Parallel	1 25-pin parallel port
	Serial	2 9-pin serial ports
	USB	Dual USB ports
	Keyboard	1 port
	Mouse	1 port
	Remote systems management	1 dedicated remote systems management port
	SCSI connections	Two 68-pin SCSI connections knockouts

Graphics	Optional

Form Factor	Tower, Pedestal, Rackmount (M-Series Cabinet)

Power Supply	Auto-sensing power supply, hot swappable, N+1 (see Step 4)

Manageability	Insight Manager

OS Support	AlphaServer ES40 Tru64 UNIX systems include pre-installed software, Base license, Unlimited User license, Server Extension license, Internet Express, and Secure Web Server
	AlphaStation ES40 Tru64 UNIX systems include pre-installed software, 2-user Base license and Open3D traditional license
	AlphaServer ES40 OpenVMS systems include pre-installed software, Base license with System Manager license and Enterprise Integration Server License Package for OpenVMS V3.1
	AlphaStation ES40 OpenVMS systems include pre-installed software, Base license, Concurrent Use 1-user license, NAS 150 Client license, MMS RT license, and Open3D traditional license
	Minimum OS support - Tru64 UNIX V4.0F, OpenVMS V7.2-2, Linux RedHat V6.2, Linux SuSE V6.3 or greater

Service and Support

Protected by HP Services including a three-year on-site hardware warranty with next business day response. Software warranty is a 90-day telephone advisory. Training, consulting, network integration, software support, comprehensive system maintenance and guaranteed uptime services are also available for customers requiring higher levels of service and support.

Systems

Step 1 – Select system

AlphaServer ES40 systems require the mandatory selection of the following items:

Disk drive cage or StorageWorks shelf (Step 5)
System disk drive (Step 5)
System enclosures: Tower, Pedestal, or Rack Kit (Step 6)
Ethernet adapter (Step 8)
Storage adapter (Step 10)
Software media and documentation for first system onsite

NOTES: ES40 Model 1 to Model 2 Upgrade Kit available - see Step 16.
Only 2-5-2 part numbers are factory integrated.

AlphaServer ES40 Systems
ES40	OS	CPU	PCI I/O Slots	Memory/Cache	Order Number
Model 1	Tru64 UNIX	833 MHz	6	512 MB/8 MB	DA-62CAA-CA
Model 1	Tru64 UNIX	833 MHz	6	1 GB/8 MB	DA-62CAA-DA
Model 1	Tru64 UNIX	833 MHz	6	2 GB/8 MB	DA-62CAA-EA

Model 2	Tru64 UNIX	833 MHz	10	512 MB/8 MB	DA-64CAA-CA
Model 2	Tru64 UNIX	833 MHz	10	1 GB/8 MB	DA-64CAA-DA
Model 2	Tru64 UNIX	833 MHz	10	2 GB/8 MB	DA-64CAA-EA
Model 2	Tru64 UNIX	833 MHz	10	4 GB/8 MB	DA-64CAA-FA

Model 1	OpenVMS	833 MHz	6	512 MB/8 MB	DY-62CAA-CA
Model 1	OpenVMS	833 MHz	6	1 GB/8 MB	DY-62CAA-DA
Model 1	OpenVMS	833 MHz	6	2 GB/8 MB	DY-62CAA-EA

Model 2	OpenVMS	833 MHz	10	512 MB/8 MB	DY-64CAA-CA
Model 2	OpenVMS	833 MHz	10	1 GB/8 MB	DY-64CAA-DA
Model 2	OpenVMS	833 MHz	10	2 GB/8 MB	DY-64CAA-EA
Model 2	OpenVMS	833 MHz	10	4 GB/8 MB	DY-64CAA-FA

AlphaStation ES40 Systems
Model 2	Tru64 UNIX	833 MHz	10	512 MB/8 MB	DA-64CAA-CW
Model 2	OpenVMS	833 MHz	10	512 MB/8 MB	DY-64CAA-CW

Step 2 - Additional CPU Modules - Optional

One CPU included, three additional CPUs are supported
	SMP upgrade, includes one 67/667-MHz CPU with 8-MB cache and Tru64 UNIX SMP license	KN610-BB
	SMP upgrade, includes one 67/667-MHz CPU with 8-MB cache and OpenVMS SMP license	KN610-BC
	SMP upgrade, includes one 68/833-MHz CPU with 8-MB cache and Tru64 UNIX SMP license	KN610-CB
	SMP upgrade, includes one 68/833-MHz CPU with 8-MB cache and OpenVMS SMP license	KN610-CC

From:	To:
EV67 667-MHz CPU	EV68 833-MHz CPU
	Upgrade console firmware to V5.9-24 as minimum revision
	Upgrade system hardware with EV68 CPUs
	Ensure all system firmware matches console version V5.9-24
EV6 500-MHz CPU	EV68 833-MHz CPU
	Upgrade console firmware to V5.9-24 as minimum revision
	Upgrade system hardware with EV68 CPUs
	Re-install V5.9-24 console firmware
	Ensure all system firmware matches console version V5.9-24

Step 3 - Memory - Optional

Systems include one memory option
Model 1 systems supports four memory options (total of 16 DIMMs)
Model 2 systems support eight memory options (total of 32 DIMMs - see Note below)
Memory performance considerations: Interleaved operations reduce the average latency and increase the memory throughput over non-interleaved operations. With one memory option (4 DIMMs) installed, memory interleaving will not occur. With two identical memory options (8 DIMMs) installed, memory read-write operations are two-way interleaved. With four identical memory options (16 DIMMs) installed, memory read-write operations are four-way interleaved, maximizing memory throughput.

	512-MB memory option (4 x 128-MB DIMMs)	MS610-CA
	1-GB memory option (4 x 256-MB DIMMs)	MS610-DA
	2-GB memory option (4 x 512-MB DIMMs)	MS610-EA
	4-GB memory option (4 x 1024-MB DIMMs)	MS610-FA
	NOTE: ES40 configurations that require maximum N+1 power (three power supplies) are restricted to a maximum of 24-GB of mixed memory (sixteen 1-GB DIMMs and sixteen 512-MB DIMMs). If N+1 maximum power is not required, 32-GB of memory is supported.
	NOTE: Linux configurations with large memory require the installation of a patch. The patch to support greater than 2 GB of memory per system is located at: http://www.kernel.org/pub/linux/kernel/people/andrea/patches/v2.2/2.2.17 (patch name: bigmem-2.2.18pre2-18.bz2) The following minimum operating system versions require the patch: Linux RedHat V6.2 Linux SuSE V6.3 (Kernel V2.2.17)
	The following operating system minimum versions support greater than 2 GB of memory: Linux RedHat V7.0 (installs Kernel V2.2.17) Linux SuSE V7.0 (installs Kernel V2.2.16)
	When installing Linux SuSE V7.0 on a system with more than 2 GB of memory, user will be prompted for a (ramdisk) floppy. To create a floppy: Mount the SuSE V7.0 installation CD-ROM #1 on the system. Mount a blank formatted floppy (if not formatted, execute the following command: fdformat/dev/fd0H1440). Change directory, to the "disks" directory on the install CD-ROM. Execute the following command to create the floppy contents: dd if=install of=/dev/fd0.
	Use this floppy when prompted by the install procedure for a floppy.

Options

Step 4 - Additional Power Supplies - Required for third and fourth CPUs and/or second Disk Drive Cage

One power supply supports two CPUs, up to 12 memory DIMMs, and one disk card cage; order second power supply if N+1 power is required. Two power supplies support third and fourth CPU, 13 to 32 memory DIMMs (up to 24-GB of memory), and/or two disk card cages; order third power supply if N+1 power is required for third and fourth CPUs, 24-GB of memory, and/or two disk card cages. Three power supplies support 32 GB of memory without N+1 power. Three power supplies support a maximum of 24 GB of memory with full N+1 power. Each additional power supply ordered with a tower system requires an additional country-specific power cord. Pedestal system and Rack kit include three internal power cords regardless of the number of power supplies ordered; Pedestal systems support 120 V and 240 V power cords.
	ES40 720W power supply	H7906-A9

Step 5 - Disk Drive Cage or StorageWorks Shelf - Mandatory

Tower enclosure supports one system and two disk drive cages Pedestal enclosure supports one system and two disk drive cages, two Universal 42xx/43xx StorageWorks shelves or three BA36R StorageWorks shelves M-Series cabinets support five systems each with two disk drive cages and up to six StorageWorks shelves

Step 5a - Disk Drive Cage - Requires selection of system disk drive

Disk Drive Cages	6-bay disk drive cage with cable for use with 1-inch Universal drives – requires mandatory selection of UltraSCSI adapter and SCSI cable (Step 10) per disk drive cage	BA610-6D
	6-bay disk drive cage with embedded Ultra2 LVD adapter; supports internal SCSI 1-inch Universal drives or tapes only OpenVMS V7.2-2 requires OpenVMS Tima Kit located at: - http://ftp.support.compaq.com/patches/.new/openvms.shtml Tru64 UNIX V4.0F requires Patch Kit 2 (BL13): - DUV40FAS0002-19991116.tar	BA610-6E
	NOTE: See AlphaServer ES40 Configuration Chart for Storage Adapters in Step 10.

System Disk Drives (Supported in Disk Drive Cage and Universal StorageWorks Shelves)	18.2-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive	3R-A3848-AA
	36.4-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive	3R-A3838-AA
	36.4-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive	3R-A3849-AA
	72.8-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive	3R-A3839-AA
	72.8-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive	3R-A3851-AA
	146-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive	3R-A3841-AA

Step 5b - StorageWorks Model 4314R and Model 4354R Universal Drive Shelves

	StorageWorks Model 4314R and 4354R Ultra2 SCSI (LVD) single-bus and split-bus Universal drive shelves; refer to StorageWorks Enclosure 4300 Family QuickSpecs when configuring shelves. When selecting a DS-SL13R-xx split-bus shelf, order two UltraSCSI adapters. Model 43xx shelves are compatible with Wide Ultra2 (LVD) adapters only. BN38C-05 cable is required per channel if the connection is not VHDCI/VHDCI. DS-SL13R shelves include one 12-foot VHDCI/VHDCI SCSI cable. Note that the depth of a DS-SL13R-xx shelf does not allow front and rear mounting.
	StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf, includes one power supply, U.S. (190209-0011)	DS-SL13R-AA
	StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf, includes one power supply, Japan (190209-291)	DS-SL13R-AJ
	StorageWorks Model 4354R Ultra3 SCSI (LVD) split-bus Universal drive rackmount shelf, includes two redundant power supplies, U.S. (190211-0011)	DS-SL13R-BA
	StorageWorks Model 4354R Ultra3 SCSI (LVD) split-bus Universal drive rackmount shelf, includes two redundant power supplies, Japan (190211-291)	DS-SL13R-BJ
	To add additional power supply for single-bus Universal shelf, U.S. (338296-B21)	DS-SE2UP-BA
	To add additional power supply for single-bus Universal shelf, International (338296-B22)	DS-SE2UP-BI

StorageWorks Model 4314T Standalone Enclosure for Universal Drives	Model 4314T Ultra3 SCSI, single-bus tower enclosure, U.S. (190210-001)	DS-SL13T-AA
	Model 4314T Ultra3 SCSI, single-bus tower enclosure, International (190210-B31)	DS-SL13T-AB
	Model 4314T Ultra3 SCSI, single-bus tower enclosure, Japan (190210-291)	DS-SL13T-AJ

Step 6 - System Enclosures - Mandatory selection of Tower, Pedestal, or Rack Kit

Step 6a - Tower Enclosure

Tower enclosure supports one system Tower enclosure ordered in North America includes 120V power cord; country-specific power cord mandatory for all non-North American systems; additional power cord mandatory for each power supply ordered with a system installed in a tower enclosure
	Tower Enclosure	BA61M-MT

Step 6b - Pedestal Enclosure

Pedestal enclosure supports one system, two Universal 43xx StorageWorks shelves or three UltraSCSI BA36R StorageWorks shelves Pedestal enclosures (BA61P-PA, 120V/BA61P-PB, 240V) support Universal shelves 120V pedestal enclosure includes two external 120V power cords; 240V pedestal enclosure requires two country-specific power cords Pedestal enclosure includes two factory-configured power strips that provide five available outlets; if the number of BA356-RC/RD power supplies requires a sixth outlet, this can be accommodated only if the system chassis is limited to two H7906-A9 power supplies
	120V Pedestal Enclosure, includes two external power cords	BA61P-PA
	240V Pedestal Enclosure, requires two country-specific power cords	BA61P-PB

Step 6c - Rack Kit for M-Series Cabinet

Rack Kit required for each AlphaServer ES40 system installed in a new or existing M-Series Cabinet Rack Kit supports one system
	Rack kit for AlphaServer ES40, includes dress bezel, slides, three internal power cords, all bracketry and hardware for mounting in M-Series cabinets	BA61R-RM
NOTE: Factory integration of an ES40 system drawer in a 9000 rackmount cabinet using rack kit, 3X-BA61R-RC, is not supported. Contact Custom Systems or Certified Integration Partner.

Step 7 - M-Series Cabinets

M-Series cabinet enclosures support up to four systems, up to six StorageWorks shelves, and/or two BA370 enclosures; M-Series Enclosures require selection of the following items: H9A10 or H9A15 cabinet, 120V or 240V Rack kit for each system H9A10 or H9A15 rear cabinet extender Cabinet front door based on cabinet height Factory integration Ballast kit if only one system is ordered for the H9A15 cabinet NOTE: For configurations beyond those listed in the following charts, contact CustomSystems.

Cabinet Configuration Chart for AlphaServer ES40 (8U) with StorageWorks Shelves (4U)
Cabinet	Rack Kit	Cabinet Extender	Cabinet Height/Space	Systems	BA356 Shelves	DS-SL13R 120V Shelves(2)	BA356/ DS-SL13R(3)
							BA356	DS-SL13R
H9A10-MC/MD(1)	BA61R-RM	H9C10-TE	67-inches/34U	1	6	8	6	4
				2	6	5	6	1
				3	2	2	4	0
				4(1)	0	0	0	0
H9A15-MC/MD(4)	BA61R-RM	BA61R-RM	79-inches/41U	1	6	8	6	5
				2	6	5	6	2
				3	6	2	6	0
				4	2	0	2	0
				5(5)	0	0	0	0

NOTES:

Contact CustomSystems for cabinet configurations with four AlphaServer ES40 systems installed in H9C10-MC/MD cabinet.
Japan only – 240V cabinet required when using Universal shelves
When using a combination of BA356 and DS-SL13R shelves in the same cabinet, do not remove the top fan (only remove fan when using DS-SL13R shelves exclusively)
Installation of one AlphaServer ES40 system in an H9A15 cabinet requires the mandatory selection of a ballast kit.
When adding the 5th system drawer, replace H7600-AA or -DB power controller with H7602-EA or -DB power controller. When replacing H7600 controllers, replace all associated power cords; order BN35S-4E power cords for H7602-EA and H7602–DB power controllers.

M-Series Cabinets	Required selection of one cabinet Two H7600-xx power distribution units are standard in the M-Series cabinet For cabinet configurations that require a third power distribution unit (H7600-xx), contact CustomSystems at 1-800-282-6672.
	67-inch cabinet with 59.5-inch or 34U of usable vertical space, 120V dual-24A controller, each with 10 NEMA 5-15R outlets, input power plug NEMA L5-30P, Americas, Asia Pacific; includes rear door and top fan tray	H9A10-MC
	67-inch cabinet with 59.5-inch or 34U of usable vertical space, 240V dual-16A controller, each with 12 IEC C13 outlets, input power plug IEC 309, 16A, Europe; includes rear door and top fan tray	H9A10-MD
	79-inch cabinet with 71.7-inch or 41U of usable vertical space, 120V dual-24A controller, each with 10 NEMA 5-15R outlets, input power plug NEMA L5-30P, Americas, Asia Pacific; includes rear door and top fan tray	H9A15-MC
	79-inch cabinet with 71.7-inch or 41U of usable vertical space, 240V dual-16A controller, each with 12 IEC C13 outlets, input power plug IEC 309, 16A, Europe; includes rear door and top fan tray	H9A15-MD

Rear Cabinet Extender	Required selection of one cabinet extender for each H9A10 or H9A15 cabinet
	Rear cabinet extender, top gun blue, for H9A10-MC/MD cabinets	H9C10-TE
	Rear cabinet extender, top gun blue, for H9A15-MC/MD cabinets	H9C15-TE

Cabinet Front Door	Required selection of door based on cabinet height
	Front door, top gun blue, for H9A10-MC/MD cabinet enclosure	H9C10-TF
	Front door, top gun blue, for H9A15-MC/MD cabinet enclosure	H9C15-TF

Factory Integration	Required
	Factory Integration of systems and storage devices assembled and configured in cabinet enclosure in predefined locations	YS-ASCAA-AA

Ballast Kit	Required only if one system is ordered for the H9A15 cabinet Ballast is added to a cabinet at particular locations for specific configurations to meet safety regulations for installation, operation, and service; see Cabinet Configuration Charts.
	Two 35 to 40 lb steel plates	H9C10-MC

Step 8 - Networking Adapters/Controllers

Step 8a - Networking Adapters/Controllers - Mandatory

Select mandatory Ethernet adapter Adapters require a minimum of Tru64 UNIX V4.0F or OpenVMS V7.2-2 Each adapter uses one PCI slot NOTE: Ethernet adapter is not required if 3X-DEPVZ-AA or KZPCM is selected as SCSI adapter for StorageWorks shelf.

		Maximum # Supported
		Tru64 UNIX	Open VMS	Linux
Ethernet 10/100/1000	PCI (32-/64-bit, 33-/66-MHz) dual-port 10/100 Ethernet (UTP/RJ45s) NIC and Base Module. (One 3X-DE602-TA or 3X-DE602-FA optional add-on daughter card can be combined with this module.) Use BN25G, BN26M, BN24Q, or BN28Q twisted pair RJ45 cables.	4	4	-	3X-DE602-BB
	PCI single-port 1000 Mbps (MMF with duplex-SC) Gigabit Ethernet; Tru64 UNIX V5.1B/TruCluster V5.1B supports up to eight nodes and requires: - T64V51BB22AS0002-20030415.tar Requires Early Release Patch to update driver to V1.0.21: T64V51BB22-C0019200-19212-E-20030710.tar http://ftp1.support.compaq.com/public/unix/v5.1b/t64v51bb1-0003000-16672-e-20030130.README Tru64 UNIX V5.1A/TruCluster V5.1A supports up to eight nodes and requires Early Release Patch: - T64V51AB21-C0127901-19213-E-20030710.tar OpenVMS V7.301 support as a standalone network interface and as a cluster interconnect requires that users download and install the following two ECO Kits: DEC-AXPVMS-VMS731_PCSI_V0100-4.PCSI DEC-AXPVMS-VMS731_LAN_V0600-4.PCSI NOTE: Use BN34A, BN34B, or equivalent cables with SC connectors.	4 per bus	4 per bus	-	3X-DEGXA-SA
	PCI single-port 10/100/1000 Mbps (Twisted-Pair Copper with RJ45) Gigabit Ethernet; Tru64 UNIX V5.1B/TruCluster V5.1B supports up to eight nodes and requires: - T64V51BB22AS0002-20030415.tar Requires Early Release Patch to update driver to V1.0.21: T64V51BB22-C0019200-19212-E-20030710.tar http://ftp1.support.compaq.com/public/unix/v5.1b/t64v51bb1-0003000-16672-e-20030130.README Tru64 UNIX V5.1A/TruCluster V5.1A supports up to eight nodes and requires Early Release Patch: - T64V51AB21-C0127901-19213-E-20030710.tar OpenVMS V7.301 support as a standalone network interface and as a cluster interconnect requires that users download and install the following two ECO Kits: DEC-AXPVMS-VMS731_PCSI_V0100-4.PCSI DEC-AXPVMS-VMS731_LAN_V0600-4.PCSI NOTE: Use BN34A, BN34B, or equivalent cables with SC connectors	4 per bus	4 per bus	-	3X-DEGXA-TA

Multi-function Module 10/100	PCI (32-bit, 33-MHz) multi-function (single-port 10/100 Ethernet UTP/RJ45, Ultra2 LVD SCSI, and 2D graphics) adapter NOTE: No support for multi-head graphics. OpenVMS V7.2-2 requires OpenVMS Tima Kit located at: - http://ftp.support.compaq.com/patches/.new/openvms.shtml Tru64 UNIX V5.1 requires Patch Kit 3: - T64V51AS0003-20010413.tar Tru64 UNIX V4.0F with NHD2 - TruCluster V5.1 support restricted to non-shared buses Use BN25G, BN26M, BN24Q, or BN28Q twisted pair RJ45 cables.	1	1 Requires Slot 0	-	3X-DEPVZ-AA
	3X-DEPVZ-AA specific-use 3-meter LVD2 SCSI cable				BN37A-03

Step 8b – Networking Adapters/Controllers - Optional

		Maximum # Supported
		Tru64 UNIX	Open VMS	Linux
Ethernet 10/100	PCI (32-/64-bit, 33-/66-MHz) single-port 1000 Mbps (MMF/SC) NIC; no on-board Boot-ROM support. Use BN34A or BN34B cables.	4	4	-	DEGPA-SA
	PCI (32-/64-bit, 33-/66-MHz) single-port 10/100/1000 (UTP/RJ45) Gigabit NIC, copper; no on-board Boot-ROM support. NOTE: Requires minimum version of Tru64 UNIX V5.0A, Patch kit 2: - T64V50AAS0002-20001004.tar Requires minimum version of OpenVMS V7.2-2; OpenVMS V7.3 requires Patch kit:- DEC-AXPVMS-VMS73_LAN-V0100-4.PCSI Use BN25G, BN26M, BN24Q, or BN28Q twisted pair RJ45 cables.	4	4	4	DEGPA-TA
	Dual-port 10/100 Ethernet (UTP/RJ45) add-on daughter card for use with the 3X-DE602-BB only. The combined 3X-DE602-BB and 3X-DE602-TA modules provide four 10/100 (UTP/RJ45s) ports in a single PCI slot option; allows for a maximum of 16 ports per system. NOTE: The 3X-DE602-TA cannot be used as standalone. OpenVMS V7.3 requires Tima Kit: - DEC-AXPVMS-VMS73_LAN-V0100—4.PCSI OpenVMS V7.2-2H1 requires OpenVMS Tima Kit located at: http://ftp.support.compaq.com/patches/.new/openvms.shtml Use BN25G, BN26M, BN24Q, or BN28Q twisted pair RJ45 cables.	4	4	-	3X-DE602-TA

FDDI	Single-port 100Mbps (MMF/duplex-SC) add-on daughter card for use with 3X-DE602-BB. The combined 3X-DE602-BB 3X-DE602-FA provides two 10/100 (UTP/RJ45s) and one 100Mbps (MMF/SC) ports in a single PCI slot option. NOTE: The 3X-DE602-TA cannot be used standalone. Use BN34A or BN34B cables.	4 per system 1 per adapter	1 per adapter	-	3X-DE602-FA
	PCI (32-bit, 33-MHz) to FDDI SAS (MMF/duplex-SC) NIC. Use BN34A, BN34B, or BN34D cables.	4	4	-	3X-DEFPA-AC
	PCI (32-bit, 33-MHz) to FDDI DAS (MMF/duplex-SC) NIC. Use BN34A, BN34B, or BN34D cables.	4	4	-	3X-DEFPA-DC
	PCI (32-bit, 33-MHz) to FDDI DAS (UTP/RJ45s) NIC. Use BN25G, BN26M, BN24Q, or BN28Q twisted pair RJ45 cables.	4	4	-	3X-DEFPA-MC
	PCI (32-bit, 33-MHz) to FDDI SAS (UTP/RJ45) NIC. Use BN25G, BN26M, BN24Q, or BN28Q twisted pair RJ45 cables.	4	4	-	3X-DEFPA-UC
	FDDI - specific cable - Multimode fiber optic (MMF) 62.5/125um duplex cable with SC-to-MIC connectors. -xx = available lengths: (01, 03, 10) for 1, 3, 10 meters				BN34D-xx

ATM	PCI (32-bit, 33-MHz) to 155 Mbps ATM, copper NIC with RJ45 connector. Use BN25G-xx, or BN26M-xx cables.	6	6	-	3X-DAPBA-UA
	PCI (32-bit, 33-MHz) to 155 Mbps ATM fiber NIC with SC connector. Use BN34B-xx cable.	6	6	-	3X-DAPBA-FA

Synchronous Communications (SYNC)	PCI (32-bit, 33-MHz) to dual-port intelligent synchronous communications NIC. Requires at least one (maximum two) 3X-BC34x synchronous cable listed below.	4	4	-	3X-PBXDD-AA
	PCI (32-bit, 33-MHz) to quad-port intelligent synchronous communications NIC. Requires at least one (max four) 3X-BCN34x synchronous cable listed below.	4	4	-	3X-PBXDD-AB
	Synchronous-Specific Cables
	EIA-530 single-port cable				3X-BC34G-06
	V.24/EIA-232 single-port cable				3X-BC34L-06
	V.11/x.21 single-port cable				3X-BC34S-06
	V.35 single-port cable				3X-BC34T-06

Asynchronous Communications (ASYNC)	PCI (32-bit, 33-MHz) to quad-port Async Communications NIC with DB-25 octopus cable	4	4	-	PBXDA-BA
Asynchronous Communications (ASYNC)	PCI (32-bit, 33-MHz) to 8-port Async Communications NIC with DB-25 octopus cables	4	4	-	PBXDA-BB
	PCI (32-bit, 33-MHz) to 16-port Async Communications Controller and tabletop16-port distribution box with RJ45 connectors	2	2	-	PBXDA-AC
	PBXDA-AC Asynchronous Connector Adapters
	RJ45 to DB-25 converter cable				CXI01-AC
	RJ45 to DEC MJ11 converter cable (8 pack)				CXI01-AF

Step 8c– Multi-use Cables

		Maximum # Supported
		Tru64 UNIX	Open VMS	Linux
Ethernet, FDDI, ATM	Multimode fiber optic (MMF) 62.5/125um duplex cable, with SC-to-ST connectors. -xx = available lengths: (2E, 4E, 01, 03, 10, 20, 30) for 2.4, 4.5, 1, 3, 10, 20, 30 meters				BN34A-xx
	Multimode fiber optic (MMF) 62.5/125um duplex cable, with SC-to-SC connectors. -xx = available lengths: (2E, 4E, 01, 03, 10, 20, 30) for 2.4, 4.5, 1, 3, 10, 20,0 meters				BN34B-xx
	Category 5e (4-Unshielded Twisted Pairs / UTP) straight-through cable with RJ45-to-RJ45 connectors for system to switch, repeater, or hub connectivity. -xx = available lengths: (0B, 0E, 01, 03, 04, 07) for 0.2, 0.5, 1, 3, 4, 7 meters				BN25G-xx
	Category 5e (4-Twisted Pairs, Screened/ ScTP) straight-through cable with RJ45-to-RJ45 connectors for system to switch, repeater, or hub connectivity. -xx = available lengths: (0E, 01, 03, 04, 07) for 0.5, 1, 3, 4, 7 meters				BN26M-xx
	Category 5e (4-Unshielded Twisted Pairs / UTP) Xover cable with RJ45-to-RJ45 connectors for system to switch, repeater, or hub connectivity. -xx = available lengths: (0E, 01, 03, 04, 07) for 0.5, 1, 3, 4, 7 meters				BN24Q-xx
	Category 5e (4-Twisted Pairs, Screened / ScTP) Xover cable with RJ45-to-RJ45 connectors for system to switch, repeater, or hub connectivity. -xx = available lengths: (0E, 01, 03, 04, 07) for 0.5, 1, 3, 4, 7 meters				BN28Q-xx

Step 9 - MEMORY CHANNEL - Optional

NOTE: When using MEMORY CHANNEL, refer to the TruCluster QuickSpecs for configuration guidelines and restrictions: http://www.compaq.com/products/quickspecs/division/10657.html The MEMORY CHANNEL controller, CCMAB-AA, must be revision C1 or later.

Tru64 UNIX Systems (V5.0A and later)	Each system node in the cluster requires a TruCluster software license (QL-6BRAE-AA)

Tru64 UNIX Systems (V4.0F)	Requires a minimum of Tru64 UNIX V4.0F with TruCluster V1.6 or later Each system node in the cluster requires a TruCluster Production Server (QB-3RLAE-AA) or TruCluster MEMORY CHANNEL software license (QB-4ZCAE-AA) TruCluster MEMORY CHANNEL license (QB-4ZCAG-AA), normally used for high performance technical computing applications, not required if systems include a TruCluster Production Server license (QB-3RLAE-AA)

OpenVMS Systems	OpenVMS V7.2-2 or later and OpenVMS Cluster license (QL-MUZAE-AA) are required

Configuring Information	Up to two PCI-to-System Area Network adapters (CCMAB-AA) are supported in a single system. Two-node clusters can be configured by ordering a CCMAB-AA for each node and one BN39B-04 or BN39B-10 cable; cable connects directly to CCMAB-AA in each node For a two-node cluster that will not be rebooted when adding additional members, order one CCMAB-AA adapter and one BN39B-04 or BN39B-10 cable for each node and one CCMHB-AA hub for the cluster Two-node clusters can also be configured by ordering two CCMAB-AA adapters for each node and two BN39B-04 or BN39B-10 cables; cables connect directly to CCMAB-AA in each node. For three or four node clusters, order one CCMAB-AA adapter and one BN39B-04 or BN39B-10 cable for each node, and one CCMHB-AA hub for the cluster If two CCMAB-AAs are configured in each system, a second CCMHB-AA is required. CCMHB-AA includes four CCMLB-AA line cards and supports up to four nodes; expansion up to eight system nodes can be achieved by adding up to four CCMLB-AA line cards. If nodes must be separated by a distance longer than standard copper cables allow the CCMFB option converts the output of the standard CCMAB controller or CCMLB line card to single-mode fiber optic cable. The fiber optic connection may be up to 2,000 meters long between two CCMAB controllers connected in virtual hub mode, or 3,000 meters between a CCMAB controller and a CCMHB hub. (The connection from the CCMHB hub to a second system may also be 3,000 meters.) The CCMFB option requires a second PCI slot in the system from which it draws power only. It is normally connected to the corresponding CCMAB controller with the short BN39B-01 cable. The CCMFB is also used in the CCMHB hub where it occupies a slot normally used by the CCMLB line card, limiting expansion to four radial fiber optic connections. CCMHB-BA hub expansion box provides additional slots for up to eight fiber optic connections. Two standard length single-mode fiber optic cables are available (BN34R-10 and BN34R-31); however, users normally provide this fiber optic connection. Fiber optic connectivity is completely transparent to the systems using it and has no performance impact.

MEMORY CHANNEL Controller/System Area Network Hub	PCI-to-System Area Network Controller, maximum two	CCMAB-AA
	System Area Network Hub with four line cards; includes BN19P-2E power cord for Canada, Japan, and U.S. - for other regions, order appropriate power cord from the following list:	CCMHB-AA
	Hub expansion box with no line cards	CCMHB-BA
	Expansion line card for CCMHB hub	CCMLB-AA
	1-meter cable for CCMAB and CCMHB	BN39B-01
	4-meter cable for CCMAB and CCMHB	BN39B-04
	10-meter cable for CCMAB and CCMHB	BN39B-10
	Copper-to-single mode fiber optic converter	CCMFB-AA
	Rackmount kit (3U) for CCMHB (MEMORY CHANNEL Hub II); required for mounting in H9A1x cabinets.	3X-BA61R-MC
	Power cord for rackmount CCMHB hub	BN35S-02

MEMORY CHANNEL Power Cords	Australia, New Zealand (103541-011)	BN19H-2E
	Central Europe	BN19C-2E
	Denmark (103541-481)	BN19K-2E
	Egypt, India (103541-AR1)	BN19S-2E
	Ireland, United Kingdom	BN19A-2E
	Israel	BN18L-2E
	Italy (103541-461)	BN19M-2E
	Japan, 2.5-meter, Dentori approved	3X-BN46F-02
	Switzerland (103541-511)	BN19E-2E

Step 10 - Storage Adapters/Controllers

NOTE: Refer to the following chart when configuring adapters, shelves, and disks.

AlphaServer ES40 Configuration Chart for Storage Adapters
Storage Adapters	Shelf	Disk Drives	Tru64 UNIX	OpenVMS	Linux
3X-KZPCA-AA	BA610-6D DS-SSL14-Rx DS-SL13R-xx	3R-A0xxx-AA 1-inch Universal 3R-A1xxx-AA 1-inch Universal 3R-A3xxx-AA 1-inch Universal	V4.0F or higher	V7.2-2 or higher	RedHat V6.2 SuSE V6.3 (Requires BA610)
3X-KZPEA-DB	BA610-6D DS-SSL14-Rx	3R-A0xxx-AA 1-inch Universal 3R-A1xxx-AA 1-inch Universal 3R-A3xxx-AA 1-inch Universal	V5.1A only	V7.2-2 or higher	-
DS-KGPSA-EA	See external storage options	3R-A0xxx-AA 1-inch Universal 3R-A1xxx-AA 1-inch Universal 3R-A3xxx-AA 1-inch Universal	V5.1A	V7.3-1	-
DS-KGPSA-DA	See external storage options	3R-A0xxx-AA 1-inch Universal 3R-A1xxx-AA 1-inch Universal 3R-A3xxx-AA 1-inch Universal	V5.1	V7.2-2 or higher	-
3X-DEPVZ-AA	DS-SL13R-xx	3R-A1xxx-AA 1-inch Universal	V4.0F with NHD2 or higher	V7.2-2 or higher	-
KZPCM-DA	BA36R-xx (Installed base only)	DS-RZ1ED-VW DS-RZ1FC-VW (Installed base only)	V4.0F or higher	V7.2-2 or higher	-
3X-KZPBA-CC	BA36R-xx (Installed base only)	DS-RZ1ED-VW DS-RZ1FC-VW (Installed base only)	V4.0F or higher	V7.2-2 or higher	RedHat V6.2 SuSE V6.3
DS-SWLA4-PD	BA36R-xx (Installed base only)	DS-RZ1ED-VW DS-RZ1FC-VW (Installed base only)	-	-	RedHat V6.2 SuSE V6.3
NOTE: Ethernet adapter is not required if 3X-DEPVZ-AA or KZPCM-DA is selected as SCSI adapter for StorageWorks shelf.
External RAID Controllers
Controllers	Shelf	Disk Drives	Tru64 UNIX	OpenVMS	Linux
3X-KZPDC-BE/DF	DS-SL13R-xx	3R-A0xxx-AA 1-inch Universal 3R-A1xxx-AA 1-inch Universal 3R-A3xxx-AA 1-inch Universal	V5.1B/V5.1A EV68 only	V7.3-1	-
DS-KZPCC-AC/CE	BA36R-xx* (Installed base only)	DS-RZ1ED-VW DS-RZ1FC-VW (Installed base only)	V4.0F or higher	Not supported	-
KZPAC-AA/CA/CB	BA36R-xx* (Installed base only)	DS-RZ1DD-VW (Installed base only)	V4.0F or higher	V7.2-2 or higher	-
DS-SWLA4-PD	BA36R-xx* (Installed base only)	DS-RZ1ED-VW DS-RZ1FC-VW (Installed base only)	-	-	RedHat V6.2 SuSE V6.3
NOTE: * = BA36R-xx shelves require DOC2 I/O module, DS-BA35X-FC; order DS-BA35X-FC as an independent option (will not be factory installed).
Internal RAID Controllers
Controllers	Shelf	Disk Drives	Tru64 UNIX	OpenVMS
3X-KZPDC-BE/DF	BA610-6D	3R-A0xxx-AA 1-inch Universal 3R-A1xxx-AA 1-inch Universal 3R-A3xxx-AA 1-inch Universal	V5.1B/V5.1A EV68 only	V7.3-1
DS-KZPCC-AC/CE (see NOTES)	BA610-6D (3)	3R-A0xxx-AA 1-inch Universal 3R-A1xxx-AA 1-inch Universal 3R-A3xxx-AA 1-inch Universal	EV6 V4.0F EV67 V5.1 (2) EV68 (1)	Not supported

NOTES:

DS-KZPCC-AC/CE RAID controllers can be used with Universal shelves and drives in ES40 Pedestal and Rackmount configurations. Configuration rules are restricted to specific CPU speeds and OS versions:
- Tru64 UNIX V4.0F requires NHD3 and Patch Kit 4 (BL15) or later (for EV6, EV67, EV68 systems)
- Tru64 UNIX V5.1 requires Patch Kit 3 (BL17) and Early Release Patch C462.02 (for EV68 and specific EV67 systems)
EV67 systems (54-30362-01) on V5.1 must be at Revision C01 or Revision D01
- Patch Kit 3 (BL17) is located at: T64V5117-C0046202-11060-Manual-ER-20010615.tar
- Patch C462.02 is located at: http://ftp1.support.compaq.com/public/unix/v5.1/
DS-KZPCC-AC/CE RAID controllers support standalone and cluster configurations
- No support as boot device in cluster configurations
- TruCluster V5.1 (restricted to non-shared buses only)
Only BA610-6D cages (with Nile Cards Rev –0B) shipped after 1 October 2001 support internal RAID. Contact Customer Services to replace Nile Cards shipped in BA610-6D disk card cages prior to 1 October 2001 where internal RAID is required.

		Maximum # Supported
		Tru64 UNIX	Open VMS	Linux
SCSI	PCI 2-port PCI to Ultra3, 64-bit LVD SCSI adapter, uses one PCI slot; includes internal 68-pin and external 68-pin VHDCI connectors; requires 3X-BC56J-xx cable to connect adapter to Universal shelf; supports internal SDLT tape drives and external SDLT tape libraries; supports dual-bus (Model 4354R) and single-bus (Model 4314R) shelves; support restricted to EV68 833-MHz systems only and Tru64 UNIX V5.1A as a minimum. See Step 12 for graphics restrictions. The 3X-KZPEA-DB adapter supports shared SCSI under Tru64 UNIX. NOTE: Two-node maximum per shared bus; each shared bus requires 3X-BN55A-01 Y-cable and 3X-H32CT-AA external LVD terminator; Tru64 UNIX supports single and dual-bus disk shelves. Requires Tru64 UNIX V5.1A as minimum revision with Patch Kit 4: - T64V51AB21AS0004-20030206.tar Requires Tru64 UNIX V5.1B and Patch Kit: - T64V51BB03AS0001-20021229. OpenVMS V7.2-2 requires Tima kit: - DEC-AXPVMS-V722_FIBRE_SCSI-V0100-4.PCSI OpenVMS V7.3 requires Tima kit: - DEC-AXPVMS-V73_FIBRE_SCSI-V0100-4.PCSI OpenVMS supports dual-bus disk shelves only.		4	-	3X-KZPEA-DB
	PCI 1-port Ultra2 (LVD) SCSI adapter, 32-bit, single-channel (uses one PCI slot); includes internal 68-pin and external 68-pin HD connectors; order BN38C-xx cable to connect adapter to Ultra3 shelf, or order VHDCI converter (BN38E-0B) for use with included cable; HSZxx RAID controllers not supported. OpenVMS V7.2-2 requires OpenVMS Tima Kit located at: http://ftp.support.compaq.com/patches/.new/openvms.shtml Tru64 UNIX V4.0F requires Patch Kit2 BL13: - DUV40FAS0002-19991116.tar	6	6	6