 |
Options
| Step 2 -
Mandatory options |
| Step 2a -
System Disk Drive - Mandatory |
- Selection of one system disk drive is mandatory
|
| AlphaServer DS10 Storage Configuration Rules: |
- Systems include 600-MB 40X CD-ROM drive and 1.44-MB diskette drive in dedicated drive
slots
- Systems include three internal storage bays that can be
configured as follows:
-
Maximum of three internal disk drives (3.5" x 1" drives) or
two internal disk drives (3.5" x 1") and one removable
5.25" half height removable media
device (one 3.5² x 1² hard disk drive is supported in removable media bay)
- SCSI adapter and SCSI cable kit required for SCSI disks or
tapes
|
| |
| IDE Disk Drives |
20-GB 7,200 rpm IDE drive |
3X-RE58A-AA |
40-GB 7,200 rpm IDE drive
|
3X-RE58A-BA |
| Internal SCSI Disk
Drives |
9.1-GB 7,200 rpm Ultra2 SCSI
drive |
DS-RZ2DA-WA |
| 9.1-GB 10,000 rpm Ultra3 SCSI
drive |
DS-RZ3DD-WA |
| 18.2-GB 7,200 rpm Ultra2 SCSI
drive |
DS-RZ2EA-WA |
|
18.2-GB 10,000 rpm Ultra3 SCSI
drive |
DS-RZ3EF-WA |
|
36.4-GB 10,000 rpm Ultra3 SCSI
drive |
DS-RZ3FD-WA |
| |
|
|
Step 2b – Internal SCSI Adapter and
Cable Kit –
(Internal SCSI disks require SCSI adapter and SCSI cable kit) |
| SCSI Adapters (for
Internal Drives) |
PCI 1-channel Ultra2 LVD SCSI
adapter |
3X-KZPCA-AA |
PCI 2-channel multi-mode Ultra3
LVD SCSI adapter, VHDCI (Tru64 UNIX V5.1 only)
Note: Patch kit required, kit available at http://ftp1.support.compaq.com/public/Digital_UNIX/v5.1/
|
3X-KZPEA-DB |
|
PCI combo card–PCI 2-channel
UltraSCSI single-ended adapter and 10/100 Mbit Ethernet |
KZPCM-DA |
|
PCI combo card–PCI 1-channel
Ultra2 LVD SCSI, 2D Graphics, 10/100 Ethernet (Tru64 UNIX and OpenVMS only) |
3X-DEPVZ-AA |
|
PCI 1-channel UltraSCSI RAID
controller (Tru64 UNIX and OpenVMS only) |
KZPAC-AA |
|
PCI 3-port UltraSCSI RAID
controllers (4-MB/8-MB cache) (Tru64 UNIX V4.0F, OpenVMS V7.2-1) |
KZPAC-CA/CB |
|
PCI 1-channel Ultra2 SCSI RAID
controller, 4-MB cache (Linux-Ready Systems only) |
SN-KZPBC-AA |
|
PCI 3-channel Ultra2 SCSI RAID
controller, 32-MB cache (Linux-Ready Systems only) |
FR-PCTAR-IB |
|
PCI 3-channel Ultra2 SCSI RAID
controller, 64-MB cache (Linux-Ready Systems only) |
FR-PCTAR-IC |
|
|
|
| SCSI Cable Kit |
AlphaServer DS10 SCSI cable kit
(connections for three internal drives) |
3X-BN51A-SE |
|
|
|
| Step 2c - Power
Cords – Mandatory for Desktop and Rackmount Systems |
| Desktop Power
Cords |
North America, 2.5 m |
3X-BN46K-2E |
| Australia, New Zealand, 2.5 m |
BN19H-2E |
|
Central Europe, 2.5 m |
BN19C-2E |
|
China, Australian AS 3112-1981 |
BN35S-02 |
|
China, NA NEMA 5-15 plug |
BN35A-01 |
|
Denmark, 2.5 m |
BN19K-2E |
|
Egypt, India, South Africa, 2.5 m |
BN19S-2E |
|
Israel, 2.5 m |
BN18L-2E |
|
Italy, 2.5 m |
BN19M-2E |
|
Japan, 2.5 m, Dentori approved |
3X-BN46G-02 |
|
Switzerland, 2.5 m |
BN19E-2E |
|
UK, Ireland, 2.5 m |
BN19A-2E |
| |
|
|
| Rackmount
(M-series Cabinet) Power Cords |
US/Canada |
BN20Z-4E |
| Non-US |
3X-BN46L-4E |
|
Japan, 4.5 m (right- angle
connector) |
3X-BN46D-4E |
| |
|
|
| Step 3 -
Memory - Optional |
- Maximum 2-GB memory
- Systems include one memory kit; maximum two memory kits per
system - Each kit includes two industry-standard DIMMs with ECC
support
|
|
256-MB memory kit, two 200-pin,
100-MHz, 128-MB DIMMs |
3X-MS310-CA |
|
512-MB memory kit, two 200-pin,
100-MHz, 256-MB DIMMs |
3X-MS310-DA |
|
1-GB memory kit, two 200-pin,
100-MHz, 512-MB DIMMs (Tru64 UNIX and OpenVMS only) |
3X-MS310-EA |
| |
|
|
| Step 4 -
Internal Storage (Removable Media)- Optional |
| AlphaServer DS10 Storage Configuration Rules: |
- Systems include 600-MB 40X CD-ROM drive and 1.44-MB diskette drive in dedicated drive
slots
- Systems include three internal storage bays which can be
configured as follows:
– Three internal disk drives (3.5" x 1"
drives) or
two internal disk drives (3.5" x 1") and
one 5.25" half height removable media
device (one 3.5²
x 1² hard disk drive is supported in removable media bay)
- SCSI Host Bus adapter and SCSI cable kit required for internal SCSI disks or tapes
|
|
12/24-GB DAT 4mm internal SCSI
tape drive (requires SN-PBXKP-BA wide-to-narrow SCSI adapter) (Tru64 UNIX and OpenVMS
only) |
TLZ10-LB |
|
20/40-GB DAT tape drive, top gun
blue (Tru64 UNIX and OpenVMS only) |
3X-SD20X-LB |
|
35/70-GB AIT tape drive, top gun
blue (Tru64 UNIX and OpenVMS only) |
3X-SZ35X-LB |
|
35/70-GB AIT tape drive (LVD),
carbon black |
3R-A2392-AA |
|
50/100-GB AIT tape drive, top gun
blue (Tru64 UNIX and OpenVMS only) |
3X-SZ50X-LB |
|
Wide-to-narrow SCSI adapter |
SN-PBXKP-BA |
| |
|
|
| Step 4-a-
External Storage (Removable Media) - Optional |
| Step 5 -
M-series Cabinets - Optional |
| M-series cabinet enclosures support up to 12
AlphaServer DS10 systems (H9A15) |
| M-series enclosures require selection of the
following items: |
- H9A10 or H9A15 Cabinet, 120V or 240V
- Cabinet front door based on cabinet height (optional on
H9A11 cabinet)
- Factory integration
|
| |
| Cabinet Configuration Chart for
AlphaServer DS10 Rackmount Systems: |
- A minimum of two AlphaServer DS10 systems is required in the H9A15 M-series cabinet.
- Each system requires an AlphaServer DS10 M-series Rackmount
kit (3X-PBX01-AB).
- Each system requires a rack mount power cord.
- Up to six BA356 shelves supported; shelves cannot be mounted
behind AlphaServer DS10 systems.
|
| Notes: The number of ballast
kits required is determined by the number of system boxes. Ballast kits are required
according to the following chart: |
For more information on
M-series Cabinet Enclosures, see
www.compaq.com/alphaserver/products/m-series/index.html |
| |
| Cabinet Configuration Chart for
AlphaServer DS10 (3U) with StorageWorks Shelves (4U) |
M-series
Cabinet |
System
Rack Kit per DS10 system |
M-series
Cabinet Height/Space |
AlphaServer
DS10 Systems |
StorageWorks
BA356/DS-SL13R Disk Shelves |
Ballast
Kits Required |
H9A10-MC/MD |
3X-PBX01-AB |
56² / 32U |
1 or
2 |
6 |
2 |
3 or
4 |
6 |
1 |
5 |
6 |
1 |
6 |
4 |
0 |
7 |
2 |
0 |
8,
9, or 10 |
0 |
0 |
H9A15-MC/MD |
3X-PBX01-AB |
66.5² / 39U |
2 or
3 |
6 |
2 |
4 |
6 |
1 |
5 |
6 |
1 |
6 |
4 |
1 |
7 |
2 |
0 |
8 to
12 |
0 |
0 |
| |
| Cabinet Configuration Chart
for AlphaServer DS10 (3U) Rackmount Systems with RA3000 and Disk Shelves (12U) |
- 12U of vertical cabinet space is reserved for one RA3000 controller shelf and up to five
disk shelves mounted in top of cabinet, front to back; an additional 2U of vertical space
is required for RA3000 controller shelf UPS.
- Disk shelves can be a combination of RA3000 DS-SWXRA-GN disk
shelves and StorageWorks BA36R-RC/RD disk shelves.
- RA3000 controller shelf supports a maximum of four
DS-SWXRA-GN disk shelves; third and fourth
DS-SWXRA-GN disk shelf ordered will be installed in rear of M-series cabinet; rear mounted
shelves require that a 2-m SCSI cable (BN37A-02) be ordered separately.
- Systems are supported in remaining vertical space. The
following table considers space requirements for the AlphaServer DS10 system boxes and
RA3000.
- For ballast requirements refer back to "Cabinet
Configuration Chart for AlphaServer DS10 (3U) with StorageWorks Shelves (4U)."
|
| |
|
M-series
Cabinet |
System
Rack Kit per DS10 system |
M-series
Cabinet Height/Space |
AlphaServer
DS10 Systems |
StorageWorks
RA3000 + Shelves |
H9A10-MC/MD |
BA36R-RC/RD |
54.2² / 32U |
1 |
1 +
5 |
2 |
1 +
5 |
3 |
1 +
5 |
H9A15-MC/MD |
BA36R-RC/RD |
66.5² / 39U |
2 |
1 +
5 |
2 |
1 +
5 |
3 |
1 +
5 |
4 |
1 +
5 |
| |
| Cabinet Configuration Chart
for AlphaServer DS10 (3U) with StorageWorks BA370 (20U) and Disk Shelves |
- 20U of vertical cabinet space is reserved for one front-mounted BA370 rackmount
enclosure, or one front-mounted and one rear-mounted BA370 enclosure in top of cabinet,
front to back. Note that top fan (1U) is removed from cabinet when BA370 rackmount
enclosure is installed.
- Systems and StorageWorks shelves are supported in remaining
vertical space; StorageWorks shelves are not supported in rear of cabinet behind a
front-mounted BA370 rackmount enclosure.
|
| |
| Cabinet Configuration Rules
for AlphaServer DS10 with BA370 and Disk Shelves |
Cabinet |
Cabinet Rack
Kit
for BA370 |
Cabinet
Height/Space |
Systems |
BA370
Enclosures |
Shelves |
H9A10-MC/MD |
BA36R-RC/RD |
54.2² / 32U |
1 |
1
(front) or |
2 |
2 |
2
(front & back) |
0 |
H9A15-MC/MD |
BA36R-RC/RD |
66.5² / 40U |
1 |
1
(front) or |
6 |
2 |
2
(front & back) |
4 |
3 |
|
0 |
| Note:
Installation of one BA370 and one system in H9A15 cabinet requires mandatory selection of
a ballast kit; a ballast kit is not required if two BA370s and one system are installed in
H9A15 cabinet. |
| |
| M-series Rackmount
Kit for AlphaServer DS10 |
- Rackmount kit must be ordered separately
|
|
| AlphaServer DS10 M-series
rackmount kit |
3X-PBX01-AB |
| |
Note:
Factory integration of a DS10 system drawer in a Compaq 9000 rackmount cabinet using rack
kit, 3X-PBX01-AA, is not supported. Contact CustomSystems. |
|
|
|
| M-series Cabinets |
67²
cabinet enclosure with 54.2² or 33U of usable vertical space;
120V dual-24A controller, each with 10 NEMA 5-15R outlets, input power plug NEMA L5-30P,
Americas, Asia Pacific; includes rear door, top fan tray, and two H7600-AA power
distribution units |
H9A10-MC |
|
67²
cabinet enclosure with 54.2² or 33U of usable vertical space;
240V dual-16 A controller, each with 12 IEC C13 outlets, input power plug IEC 309, 16A,
Europe; includes rear door, top fan tray, and two H7600-DB power distribution units |
H9A10-M |
|
79²
cabinet enclosure with 66.5² or 40U of usable vertical space;
120V dual-24A controller, each with 10 NEMA 5-15R outlets, input power plug NEMA L5-30P,
Americas, Asia Pacific; includes rear door, top fan tray, and two H7600-AA power
distribution units |
H9A15-MC |
|
79²
cabinet enclosure with 66.5² or 40U of usable vertical space;
240V dual-16A controller, each with 12 IEC C13 outlets, input power plug IEC 309, 16A,
Europe; includes rear door, top fan tray, and two H7600-DB power distribution units |
H9A15-MD |
| |
|
|
| M-series Cabinet
Rackmount Kit for AlphaServer DS10 |
- Rackmount kit must be ordered separately
|
|
| AlphaServer DS10 M-series
rackmount kit |
3X-PBX01-AB |
|
Note: (Refer to
the Cabinet Configuration Charts above for configuration rules.) |
| |
|
|
| StorageWorks
Shelves Supported in M-series Cabinets with Front Doors (H9A10/H9A15) |
StorageWorks UltraSCSI single
bus, single-ended shelf with 180W power supply and RETMA mounting kit |
BA36R-RC |
| StorageWorks UltraSCSI split bus,
single-ended shelf with 180W power supply and RETMA mounting kit |
BA36R-RD |
| 180W power supply for redundant
power of a BA36R (includes power cord) |
CK-BA35X-HH |
| |
|
|
| BA370 Rackmount
Enclosure/Rear Cabinet Extender |
BA370 front-mount rackmount
enclosure includes RETMA rackmount kit; first BA370 enclosure must be front mounted in
cabinet, 20U height |
2T-BA370-AS |
| BA370 rear-mount rackmount
enclosure includes RETMA rackmount kit; second BA370 enclosure must be rear mounted in
cabinet, 20U height |
2T-BA370-AR |
|
Note: Rear
Cabinet Extender, H9C10-TE or H9C15-TE, is mandatory for second BA370 |
| |
|
|
| M-series Cabinet
Rear Cabinet Extender |
Rear cabinet extender, top gun
blue, for H9A10-MC/MD cabinets |
H9C10-TE |
| Rear cabinet extender, top gun
blue, for H9A15-MC/MD cabinets |
H9C15-TE |
| |
|
|
| M-series cabinet
Front Door |
- Required selection of door based on cabinet height
|
|
| Front door, top gun blue, for
H9A11-MC/MD cabinet enclosure: selection of front door for H9A11 is optional, cabinet
includes front trim kit and filler bezel |
H9C11-EB |
|
Front door, top gun blue, for
H9A10-MC/MD cabinet enclosure |
H9C10-TF |
|
Front door, top gun blue, for
H9A15-MC/MD cabinet enclosure |
H9C15-TF |
| |
|
|
| M-series Cabinet Factory
Integration - Required |
Factory Integration of systems
and storage devices assembled and configured in cabinet enclosure for H9A10 or H9A15
cabinet enclosures |
YS-ASCAA-AA |
| |
|
|
| M-series Cabinet
Ballast Kits - As Required |
- Ballast is added to a cabinet at particular locations for specific configurations to
meet safety regulations for installation, operation, and service; see Cabinet
Configuration Charts
|
|
| Two 35 to 40 lb/15.88 to 18.14 kg
steel plates |
H9C10-MC |
| |
|
|
| M-series Cabinet
Rackmount Power Cords |
|
|
| US/Canada |
BN20Z-4E |
| Non-US |
BN35S-4E |
|
Japan, 2.5m |
3X-BN46D-4E |
| |
|
|
| Compaq CustomSystems Support |
- Cabinets containing systems and storage must be assembled by qualified assemblers:
Compaq Manufacturing, Compaq CustomSystems, or an authorized Compaq Certified Integration
Partner.
- For custom integration of systems, options, cabinet
expansion offerings, and additional Compaq and third-party devices, or for other cabinets,
doors, and trim kits of a different color, contact Compaq CustomSystems at 1-800-AT
COMPAQ, or your local authorized Compaq Certified Integration Partner.
|
|
| |
|
|
| Step 6 -
External Storage - Optional |
| UltraSCSI Configuration Rules |
- UltraSCSI configurations require UltraSCSI components (controllers, adapters, shelves,
disks, and cables)
- UltraSCSI adapters support UltraSCSI disks at UltraSCSI
speeds in UltraSCSI top gun blue shelves (DS-BA356-xx)
|
|
|
|
| UltraSCSI StorageWorks
Pedestals |
- UltraSCSI top gun blue pedestals provide support for UltraSCSI disk drives; pedestal is
available in single-bus or split-bus configurations and includes a personality module and
180W power supply
- UltraSCSI shelf supports: seven 3.5²
hard disk drives, or one 5.25² device and four 3.5² hard disk drives, or two 5.25² devices
and one 3.5² hard disk drive
- Installation of redundant power supply reduces number of 3.5² drive slots by one
|
|
UltraSCSI single-ended pedestal,
single-bus personality module, 180W power supply |
DS-BA356-KF |
|
UltraSCSI single-ended pedestal,
split-bus personality module, 180W power supply |
DS-BA356-KG |
|
UltraSCSI pedestal,
single-channel differential personality module, 180W power supply |
DS-BA356-KH |
|
180W power supply, includes 120V
North American and 240V IEC power cord |
CK-BA35X-HH |
|
|
|
| Tabletop Tape Drives |
- Tape drives require an LVD adapter (3X-KZPCA-AA) or single-ended UltraSCSI adapter
(KZPCM-DA) and country-specific power cord
|
|
12/24-GB 4-mm DAT narrow
single-ended tabletop SCSI tape, includes 120V North American power cord, requires
BN31W-xx SCSI cable |
DS-TLZ10-DB |
|
20/40-GB 4 mm DAT LVD tabletop
SCSI tape drive - North America (Tru64 UNIX and OpenVMS only) |
157770-001 |
|
20/40-GB 4 mm DAT LVD tabletop
SCSI tape drive - International (Tru64 UNIX and OpenVMS only) |
157770-B31 |
|
20/40-GB 4 mm DAT LVD tabletop
SCSI tape drive - Japan (Tru64 UNIX and OpenVMS only) |
157770-291 |
|
35/70-GB AIT LVD tabletop tape
drive unit, US |
216885-001 |
|
35/70-GB AIT LVD tabletop tape
drive unit, International |
216885-B31 |
|
35/70-GB AIT LVD tabletop tape
drive unit, Japan |
216885-291 |
|
50/100-GB 8mm AIT LVD tabletop
SCSI tape drive - North America (Tru64 UNIX and OpenVMS only) |
157767-001 |
|
50/100-GB 8mm AIT LVD tabletop
SCSI tape drive - International (Tru64 UNIX and OpenVMS only) |
157767-B31 |
|
50/100-GB 8mm AIT LVD tabletop
SCSI tape drive - Japan (Tru64 UNIX and OpenVMS only) |
157767-291 |
|
32/64-GB DAT loader in carrier
(Tru64 UNIX and OpenVMS only) |
TLZ9L-VA |
|
32/64-GB tabletop DAT loader
(Tru64 UNIX and OpenVMS only) |
TLZ9L-DB |
|
20/40-GB SCSI (DLT 4000E)
tabletop tape drive (Tru64 UNIX and OpenVMS only) |
TZ88N-TA |
|
40/80-GB SCSI LVD (DLT8000)
tabletop tape drive - Worldwide |
146197-B21 |
|
40/80-GB SCSI LVD (DLT8000)
tabletop tape drive - Japan |
146197-291 |
|
110/220-GB SDLT Ultra2 LVD
tabletop tape drive, US |
192103-001 |
|
110/220-GB SDLT Ultra2 LVD
tabletop tape drive, International |
192103-B31 |
|
110/220-GB SDLT Ultra2 LVD
tabletop tape drive, Japan |
192103-291 |
| |
|
|
| Storage Controllers/Host Bus
Adapters for StorageWorks Pedestals and Shelves |
- Storage controllers require a minimum Operating System Revision of Tru64 UNIX V4.0F or
OpenVMS V7.1-2 unless noted otherwise.
- Each storage controller/adapter uses one PCI slot
|
| |
|
|
| |
Maximum
# Supported |
|
| |
Tru64 UNIX |
OpenVMS |
Linux-Ready |
|
| PCI-to-Fibre Channel host bus
adapter |
2
|
2
|
-
|
DS-KGPSA-CA |
| Fibre Channel cable xx=02, 05,
15, 30, 50 meters |
|
|
|
BNGBX-xx |
| |
| PCI-to-Fibre Channel 64-bit
adapter, HBA |
-
|
-
|
2
|
DS-SWLA4-PD |
| |
| PCI 2-port UltraSCSI single-ended
adapter and 10/100 Mb Ethernet combo adapter |
2
|
2
|
2
|
KZPCM-DA |
VHDCI male-to-VHDCI male
UltraSCSI cable,
xx=02, 2E (2.5), 03, 05, 10, 20 m) |
|
|
|
BN37A-xx |
| |
| PCI 1-port Ultra2 SCSI (LVD)
adapter, 68-pin HD connector, requires BN38C cable (2 to 20m) to connect to single-ended
UltraSCSI or LVD shelf |
2
|
2
|
3
|
3X-KZPCA-AA |
| 68-pin HD male-to-VHDCI male
UltraSCSI cable; required for each external UltraSCSI shelf attached to KZPCA-AA adapter |
|
|
|
BN38C-xx |
| |
PCI 2-channel LVD multi-mode
Ultra3 SCSI adapter, VHDCI
Note: Patch kit required, kit is available at
http://ftp1.support.compaq.com/
public/Digital_UNIX/v5.1/ |
1
V5.1
|
-
|
-
|
3X-KZPEA-DB |
| PCI 1-port UltraSCSI differential
adapter; includes external 68-pin HD connector; requires BN38C-xx cable (2-25m) to connect
adapter to Differential UltraSCSI shelf or RAID controller |
2
|
2
|
2
|
KZPBA-CB |
| 68-pin HD male-to-VHDCI male
UltraSCSI cable; required for each external UltraSCSI shelf attached to KZPBA-CB adapter |
|
|
|
BN38C-xx |
| |
| PCI 3-channel Ultra2 LVD RAID
controller, 64-bit, 64-MB cache |
2
V4.0F/4.0G/5.1
|
-
|
-
|
DS-KZPCC-CE |
| PCI 1-channel Ultra2 LVD
backplane RAID controller, 64-bit, 16-MB cache |
2
V4.0F/4.0G/5.1
|
-
|
-
|
DS-KZPCC-AC |
| |
| PCI 1-port UltraSCSI RAID
controller with 4-MB cache memory, includes RAID Array 230/Plus Subsystem software and
documentation kit and VHDCI female connector; tape drives not supported - 18.2-GB or higher disk drives not supported on KZPAC-xx RAID
controllers |
2
V4.0F
|
2
|
-
|
KZPAC-AA |
| PCI 3-port UltraSCSI RAID
controller with 4-MB cache memory, includes RAID Array 230/Plus Subsystem Software and
documentation kit; tape drives not supported; SCSI cable required for each active port;
requires BN31K-0E for external third-port connection - 18.2-GB
or higher disk drives not supported on KZPAC-xx RAID controllers |
2
V4.0F
|
2
|
-
|
KZPAC-CA |
| PCI 3-port UltraSCSI RAID
controller with 8-MB cache memory, includes RAID Array 230/Plus Subsystem Software and
documentation kit; tape drives not supported; SCSI cable required for each active port;
requires BN31K-0E for external third-port connection - 18.2-GB
or higher disk drives not supported on KZPAC-xx RAID controllers |
2
V4.0F
|
2
|
-
|
KZPAC-CB |
| Cache battery backup for KZPAC
controller |
|
|
|
KZPSC-UB |
VHDCI male-to-VHDCI male
UltraSCSI cable, xx=02, 2E (2.5), 03, 05, 10, 20 m)
Note: Manufacturing may substitute BN37A-02
cable for specific cabinet configurations |
|
|
|
BN37A-xx |
| SCSI cable/bulkhead assembly kit
with KZPAC-CA/CB, allows external connection of one third port |
|
|
|
BN31K-0E |
| SCSI cable/bulkhead assembly kit
with two ports for KZPAC-CA/CB, allows external connection of two third ports |
|
|
|
KZPAC-SB |
| |
| PCI 1-channel Ultra2 SCSI RAID
controller, 4-MB cache (Linux-Ready systems only) |
-
|
-
|
3
|
SN-KZPBC-AA |
| PCI 3-channel Ultra2 SCSI RAID
controller, 32-MB cache (Linux-Ready systems only) |
-
|
-
|
3
|
FR-PCTAR-IB |
| PCI 3-channel Ultra2 SCSI RAID
controller, 64-MB cache (Linux-Ready systems only) |
-
|
-
|
3
|
FR-PCTAR-IC |
| StorageWorks BA370 Rackmount
Enclosure |
- M-series cabinets (H9A10 and H9A15) allow one BA370 enclosure to be installed in front
cabinet
- Host adapter, RAID Array controller, platform specific
Solutions Software Kit, and disk drives must be ordered separately
|
|
BA370 front mount rackmount
enclosure with five 180W power supplies, includes RETMA rackmount kit; first BA370
enclosure must be front mounted in cabinet, 20U height |
2T-BA370-AS |
|
Factory configured RAID of
rackmounted BA370/HSZ80 |
YS-ASCRD-AA |
|
Note: Factory
configured RAID sets for disks in rackmounted BA370 StorageWorks shelf controlled by one
or two HSZ70s require completion of questionnaire located at http://www.digital.com/alphaserver/fcr |
|
| |
|
|
| Removable Media
Devices for External StorageWorks Shelves |
12/24-GB 4 mm DAT narrow SCSI
tape drive in StorageWorks carrier |
DS-TLZ10-VA |
| 20/40-GB DLT tape drive in
StorageWorks carrier (Tru64 UNIX and OpenVMS only) |
TZ88N-VA |
|
40/80-GB DLT tape drive in
StorageWorks carrier |
DS-TZ90N-VW |
|
35/70-GB AIT tape drive in
StorageWorks carrier (Tru64 UNIX and OpenVMS only) |
DS-AIT35-VW |
|
600-MB 32X SCSI CD-ROM drive in
StorageWorks carrier |
DS-RRD47-VA |
| |
|
|
| StorageWorks UltraSCSI Shelves |
- Requires selection of UltraSCSI adapter and SCSI cable
- StorageWorks Shelf supports seven 3.5" x 1.6" hard
disk drives; with the addition of redundant power supply, six drives are supported
- StorageWorks shelf kits are mounted back-to-back in
pedestals and cabinets
|
|
StorageWorks UltraSCSI single-bus
shelf kit |
BA36R-RC |
|
StorageWorks UltraSCSI split-bus
shelf kit |
BA36R-RD |
|
3-m SCSI cable |
BN37A-03 |
|
|
|
| Disk Drives (Supported in
StorageWorks UltraSCSI Shelves) |
- Maximum six (10,000 rpm) or seven (7,200 rpm) drives supported in StorageWorks shelf
- One power supply supports a maximum of six 10,000 rpm disks
|
|
9.1-GB UltraSCSI drive 7,200 rpm |
DS-RZ1DA-VW |
|
9.1-GB UltraSCSI drive 10,000 rpm |
DS-RZ1DD-VW |
|
18.2-GB UltraSCSI drive 7,200 rpm |
DS-RZ1EA-VW |
|
18.2-GB UltraSCSI drive 10,000
rpm |
DS-RZ1ED-VW |
|
36.4-GB UltraSCSI drive 10,000
rpm |
DS-RZ1FC-VW |
|
|
|
| StorageWorks
Universal Drive Shelves – Model 4314R (Ultra3) |
StorageWorks Model 4314R Ultra3
rackmount, single bus, US |
DS-SL13R-AA |
| Same as above, International |
DS-SL13R-AB |
|
Same as above, Japan |
DS-SL13R-AJ |
|
|
|
| StorageWorks
Universal Drive Shelves – Model 4354R (Ultra3) |
StorageWorks Model 4354R Ultra3
rackmount, dual bus, US |
DS-SL13R-BA |
| Same as above, International |
DS-SL13R-BB |
|
Same as above, Japan |
DS-SL13R-BJ |
|
|
|
| StorageWorks
Universal Drive Shelves Single Bus – Model 4314T Tower (Ultra3) |
StorageWorks Model 4314T, Ultra3,
Universal Drive Shelves Single Bus, Tower, US |
DS-SL13T-AA |
| StorageWorks Model 4314T, Ultra3,
Universal Drive Shelves Single Bus, Tower, International |
DS-SL13T-AB |
|
StorageWorks Model 4314T, Ultra3,
Universal Drive Shelves Single Bus, Tower, Japan |
DS-SL13T-AJ |
|
|
|
| StorageWorks
Universal Drive Shelves – Model 4200 to Model 4300 Upgrade I/O Modules |
StorageWorks Model 4300 Ultra 160
single-port LVD I/O Module |
DS-SE3ZJ-DA |
| StorageWorks Model 4300 Ultra 160
dual-port LVD I/O Module |
DS-SE3ZJ-SA |
|
|
|
| System Disk Drives
(Supported in Model 4254, 4314R, 4354R Universal Drive Shelves) |
9.1-GB Ultra3 (LVD) 10,000 rpm
1.0² Universal drive |
3R-A0584-AA |
| 9.1-GB Ultra3 (LVD) 15,000 rpm
1.0² Universal drive |
3R-A1542-AA |
| 18.2-GB Ultra3 (LVD) 15,000 rpm
1.0² Universal drive |
3R-A1543-AA |
| 36.4-GB Ultra3 (LVD) 10,000 rpm
1.0² Universal drive |
3R-A0919-AA |
|
18.2-GB Ultra 3 SCSI, 10,000 RPM
1.0" Universal Drive |
3R-A0585-AA |
|
72.8-GB Ultra 3 SCSI, 10,000 RPM
1.0" Universal Drive |
3R-A3050-AA |
|
|
|
| Step 7 - UltraSCSI RAID Array Controllers and UltraSCSI RAID Packaged
Solutions - Optional |
| RAID Array 3000 Rackmount
Controller Shelf |
- Selection of RA3000 Solutions Software Kit is required
- Supported SCSI adapter - KZPBA-CB
PCI 1-port UltraSCSI differential adapter
|
|
RA3000 rackmount controller
shelf, blue, with one controller, 110V
Includes: UltraSCSI BA356 controller shelf, one HSZ22 2-channel controller with
16-MB cache, integrated Environmental Monitoring Unit (EMU), two 180W power supplies, two
dual-port host differential UltraSCSI I/O SBBs, dual-channel UltraSCSI single-ended
personality modules, one 120V 1000VA rackmount UPS, 5-m host SCSI cable (BN37A-05),
BN38E-0B adapter, UPS serial cable, PC connection serial cable (DB-9), two 68-pin HD
tri-link adapters (H8861-AA), two North American power cords, and RETMA mounting bracket
(disk shelves and disks not included)
Requires: Solutions Software Kit for platform, host adapter, RA3000 disk shelf, and
disks
Options: Second HSZ22 controller, up to four additional RA3000 disk shelves, cache
memory upgrade |
DS-SWXRA-GH |
|
RA3000 rackmount controller
shelf, blue, with one controller, 230V
Includes: UltraSCSI BA356 controller shelf, one HSZ22 2-channel controller with
16-MB cache, integrated Environmental Monitoring Unit (EMU), two 180W power supplies, two
dual-port host differential UltraSCSI I/O SBBs, dual-channel UltraSCSI single-ended
personality modules, one 230V 1000VA rackmount UPS, 5-m host SCSI cable (BN37A-05),
BN38E-0B adapter, UPS serial cable, PC connection serial cable (DB-9), two 68-pin HD
tri-link adapters (H8861-AA), RETMA mounting bracket (disk shelves and disks not included)
Requires: Solutions Software Kit for platform, two country-specific power cords,
host adapter, RA3000 disk shelf, and disks
Options: Second HSZ22 controller, up to four additional RA3000 disk shelves, cache
memory upgrade |
DS-SWXRA-GK |
| |
|
|
RAID Array 3000 Rackmount
Disk Shelf |
- Select one to four disk shelves
- Third and fourth DS-SWXRA-GN disk shelf ordered will be
installed in rear of M-series cabinet; rear mounted shelves require that a 2-m BN37A-02
SCSI cable be ordered
|
|
RA3000 rackmount disk shelf,
blue, includes UltraSCSI BA356 disk shelf, two 180W power supplies, single-ended UltraSCSI
personality card, one half meter SCSI cable (BN37A-0E), two North American power cords,
and RETMA mounting bracket (disks not included); order two country-specific power cords
for non-North American use |
DS-SWXRA-GN |
| |
|
|
| HSZ22 Controller |
- Note that second HSZ22 controller ordered is field installed only, not factory
installed; requires BN37A-0E SCSI jumper cable be ordered separately
|
|
Second HSZ22 controller with
16-MB cache and two 16-MB SIMMs for mirror cache, one BN37A-05 5-m UltraSCSI cable, one
BN38E-0B cable adapter - field installable only; note that
second HSZ22 controller does not require additional Solution Software Kit |
DS-HSZ22-AA |
|
Second HSZ22 controller with
32-MB cache and two 32-MB SIMMs for mirror cache, one BN37A-05 5-m UltraSCSI cable, one
BN38E-0B cable adapter - field installed only; note that second
HSZ22 controller does not require additional Solution Software Kit |
DS-HSZ22-AB |
| |
|
|
| RA3000 Solutions Software Kit |
- StorageWorks Command Console (SWCC) software
- Platform specific software
- Installation scripts and installation documentation
|
|
RA3000 Solutions Software Kit for
Tru64 UNIX |
QB-5TWAB-SA |
|
RA3000 Solutions Software Kit for
OpenVMS |
QB-5TWAC-SA |
| |
|
|
| HSG80/HSZ80 External
Controllers |
Fibre Channel controller
(DS-HSG80-BJ), includes 2-MB cache expandable to 128 MB; requires 128697-B21 HSG80 ACS
V8.4F software kit or 128698-B21 V8.4P software kit for each HSG80 ordered |
380672-B21 |
|
Fibre Channel controller
(DS-HSG80-BH), includes 64-MB cache expandable to 128 MB; requires 128697-B21 HSG80 ACS
V8.4F software kit or 128698-B21 V8.4P software kit for each HSG80 ordered |
380671-B21 |
|
UltraSCSI controller
(DS-HSZ80-AH), includes 64-MB cache expandable to 128 MB; requires 400569-001 for Tru64
UNIX or 400571-001 for OpenVMS |
400564-B21 |
|
UltraSCSI controller
(DS-HSZ80-AJ), includes 256-MB cache expandable to 512 MB; requires 400569-001 for Tru64
UNIX or 400571-001 for OpenVMS |
400565-B21 |
| |
|
|
| ESA 10000, RAID Array 7000,
RAID Array 8000 |
- Enterprise Storage Array 10000 and RAID Array 7000 (HSZ70) product set are supported on
AlphaServer DS10 systems
- Supported SCSI adapter for HSZ80/HSZ70 -
KZPBA-CB PCI 1-port UltraSCSI differential adapter
- Supported SCSI adapter for HSG80 -
KGPSA-BC PCI 1-port Fiber-Channel adapter
|
|
| |
|
|
| Step 8 -
Graphics Adapters - Optional |
- RAID Configuration Utility is accessible via console port for Tru64 UNIX and OpenVMS
systems; optional graphics capability available
- Select graphics adapter, monitor, and country-specific keyboard if required
|
| |
| |
Maximum
# Supported |
|
| |
Tru64 UNIX |
OpenVMS |
Linux-Ready |
|
| 3Dlabs Oxygen VX1 32-MB PCI 2D
graphics accelerator |
3 |
3 |
- |
SN-PBXGF-AB |
| ELSA Gloria synergy graphics with
8-MB SGRAM 1600 x 1200, 2D/3D graphics accelerator |
3 |
3 |
1 |
SN-PBXGK-BB |
| PowerStorm 300 3D multi-head
graphics accelerator with 15-MB frame buffer memory and 16-MB texture memory |
3 |
3 |
- |
SN-PBXGD-AD |
| PowerStorm 350 3D multi-head
graphics accelerator with 30-MB frame buffer memory and 32-MB texture memory |
3 |
3 |
- |
SN-PBXGD-AE |
| PCI combo adapter, Permedia P2
graphics, 10/100 Mbit NIC |
1 |
1 |
1 |
3X-DEPVD-AA |
| PCI combo adapter, Permedia P2
graphics, 10/100 NIC, 1-port SCSI |
1 |
1 |
- |
3X-DEPVZ-AA |
| Ensonig PCI 1373 audio card with
headphone jack and CD audio cable |
1 |
1 |
- |
SN-AVH10-AC |
| |
| Step 9 -
Monitors - Optional |
- Graphics monitors other than those listed below can be used if compatible with SVGA
graphics ordered with system
- Monitors ship with, but are not integrated with the system.
|
|
V570 15" (13.8"
viewable image size) multiple-scan color monitor, VGA to 800 x 600 @85 Hz, 0.28mm AG,
TCO99, Northern Hemisphere with NA power cord |
3R-A3082-AA |
|
Same as above with Eurocord |
3R-A3083-AA |
|
Same as above, APD, no power cord |
3R-A3084-AA |
| |
|
|
|
V500 15" (13.8"
viewable image size) auto scanning color monitor, VGA to 1024 x 768 @85 Hz, 0.28mm FST,
MPRII, Southern Hemisphere with Australia/New Zealand power cord |
3R-VRQV5-11 |
| |
|
|
|
P710 17" (16" viewable
image size) auto-scanning color monitor, Diamondtron NF, 0.25mm aperture grille pitch, VGA
to 1280 x 1024 @ 75 Hz, TCO 99; Northern Hemisphere with NA power cord |
3R-A2936-AA |
|
Same as above, APD, no power cord |
3R-A2260-AA |
|
Same as above, PRC with power
cord, CCIB |
3R-A3335-AA |
|
Same as above, Southern
Hemisphere, with Australia/New Zealand power cord |
3R-A2263-AA |
|
Same as above, Northern
Hemisphere, with Power Factor Correction and Eurocord, 220V only |
3R-A2261-AA |
| |
|
|
|
TFT 8020 18" (18.1"
viewable image size) flat panel monitor, TFT active matrix, in-plane switching technology
160 degrees viewing angles, 1280 x 1024 resolution, brightness 200 nits, detachable base;
requires ELSA GLoria Synergy or PowerStorm 3xx video adapter |
3R-A0852-AA |
| |
|
|
|
P910 19" (18" viewable
image size) auto-scanning color monitor, Diamondtron NF, 0.25mm aperture grille pitch, VGA
to 1280 x 1024 @ 85 Hz, TCO 99; Northern Hemisphere with NA power cord |
3R-A2935-AA |
|
Same as above, PRC with power
cord, CCIB |
3R-A3334-AA |
|
Same as above, Southern
Hemisphere, with Australia/New Zealand power cord |
3R-A2267-AA |
|
Same as above, Northern
Hemisphere, with power factor correction and Eurocord, 220V only |
3R-A2265-AA |
| |
|
|
|
P1100 21" (19.6"
viewable image size) auto-scanning color monitor, Trinitron CRT, 0.28mm aperture grille
pitch, VGA to 1600 x 1200 @75Hz, TCO99, Southern Hemisphere, Australia/New Zealand power
cord |
3R-VRQP1-23 |
| |
|
|
|
P1210 22" (20" viewable
image size) auto-scanning color monitor, Diamondtron NF, 0.24mm aperture grille pitch, VGA
to 1600 x 1200 @ 85 Hz, TCO 99 with power factor correction, Northern Hemisphere with NA
power cord |
3R-A2934-AA |
|
Same as above with Eurocord |
3R-VRQP2-AA |
|
Same as above, PRC with power
cord, CCIB |
3R-A3333-AA |
|
Same as above, APD, no power cord |
3R-A2268-AA |
| |
|
|
| Video Extension Cable |
Each monitor includes a 1.8-m
signal cable - video extension cable required for most server
applications |
BN39C-02 |
| |
|
|
| Monitor Power
Cords |
Australia, New Zealand, 2.5 m |
BN19H-2E |
| Central Europe, 2.5 m |
BN19C-2E |
|
Denmark, 2.5 m |
BN19K-2E |
|
Egypt, India, South Africa, 2.5 m |
BN19S-2E |
|
Israel, 2.5 m |
BN18L-2E |
|
Italy, 2.5 m |
BN19M-2E |
|
Japan, 2.5 m, Dentori approved |
3X-BN46F-02 |
|
North America |
BN26J-1K |
|
Switzerland, 2.5 m |
BN19E-2E |
|
UK, Ireland, 2.5 m |
BN19A-2E |
| |
|
|
| Step 10 -
Networks and Communications - Optional |
- Controllers/adapters require a minimum of Tru64 UNIX V4.0F or OpenVMS V7.1-2.
- Systems include dual embedded 10/100 BaseT Ethernet ports (BN25G-xx cable must be
ordered separately)
- Additional Ethernet ports can be added using available PCI slots
|
| |
| |
Maximum
# Supported |
|
| |
Tru64 UNIX |
OpenVMS |
Linux-Ready |
|
| PCI 1-port 10/100-Mb Ethernet
adapter (Twisted Pair |
1 |
- |
1 |
3X-DE600-AA |
| PCI to dual-port 10/100 UTP Fast
Ethernet adapter |
1
V4.0F |
1 |
1 |
3X-DE602-AA |
| |
| PCI single-port MMF add-on
daughter card for 3X-DE602-AA |
1 |
1 |
|
3X-DE602-FA |
| PCI 10/100 Mbit 4-port Ethernet
adapter, UTP |
1 |
1 |
1 |
DE504-BA |
| Cable for 10BaseT twisted pair
connection |
|
|
|
BN25G-xx |
| |
| PCI Gigabit Ethernet adapter, SC
connectors, MMF, no boot support |
1 |
1 |
1 |
DEGPA-SA |
| SC-to-SC dual fiber optic cable |
|
|
|
BN34B-xx |
| |
| PCI combo adapter, Permedia P2
graphics, 10/100 Mbit NIC |
1 |
1 |
1 |
3X-DEPVD-AA |
| PCI combo adapter, Permedia P2
graphics, 10/100 NIC, 1-port SCSI |
1 |
1 |
- |
3X-DEPVZ-AA |
| |
| PCI FDDI adapter, single
attachment station (SAS), multi-mode fiber (MMF), SC connector |
1 |
1 |
- |
3X-DEFPA-AC |
| PCI FDDI adapter, DAS, MMF, SC
connector |
1 |
1 |
- |
3X-DEFPA-DC |
| MIC-SC dual fiber optic cable mm,
pp xx = length in meters |
|
|
|
BN34D-xx |
| SC-to-SC dual fiber optic cable
mm, pp xx = length in meters |
|
|
|
BN34B-xx |
| PCI FDDI adapter, SAS, TP-PMD,
requires BN25H-03 cable |
1 |
1 |
- |
3X-DEFPA-UC |
| PCI FDDI dual adapter, DAS,
TP-PMD, requires BN25H-03 cable |
1 |
1 |
- |
3X-DEFPA-MC |
| 3m (9.8") FDDI cross-over
cable mm, pp xx = length in meters |
|
|
|
BN25H-03 |
| |
| PCI 4-port asynchronous
controller, cable included; maximum three PBXDA-Ax per system |
3
V4.0F |
3 |
- |
PBXDA-AA |
| PCI 8-port asynchronous
controller, cable included; maximum three PBXDA-Ax per system |
3
V4.0F |
3 |
- |
PBXDA-AB |
| PCI 16-port asynchronous
controller, cable included; maximum three PBXDA-Ax per system |
3
V4.0F |
3 |
- |
PBXDA-AC |
| PCI-to-ATM 155 Mb adapter - Fiber |
2
V4.0F |
2
V7.2-1 |
- |
3X-DAPBA-FA |
| PCI-to-ATM 155 Mb adapter - UTP |
2
V4.0F |
2
V7.2-1 |
- |
3X-DAPBA-UA |
| PCI-to-ATM 622 Mb adapter - Fiber |
1
V4.0F |
2
V7.2-1 |
- |
3X-DAPCA-FA |
| PCI-to Gigabit Ethernet
adapter-UTP, with RJ45 |
1 |
- |
1 |
DEGPA-TA |
| PCI-to-dual port synchronous
controller |
- |
2 |
- |
3X-PBXDD-AA |
| PCI-to-quad port synchronous
controller |
- |
2 |
- |
3X-PBXDD-AB |
| |
| Step 11 -
Keyboards, Mouse |
| Step 11a -
Keyboards |
- Keyboards are not included with the system and must be ordered separately
- Selection of country-specific keyboard is recommended.
|
|
Tru64
UNIX |
OpenVMS |
| U.S./English keyboard |
SN-LKQ47-BA |
LK461-A2 |
| Arabic keyboard |
SN-LKQ47-BR |
- |
| Belgian keyboard |
SN-LKQ47-AB |
LK461-AB |
| BHCSY keyboard |
SN-LKQ47-AX |
- |
| Canadian/English
keyboard |
- |
LK461-AQ |
| Canadian/French
keyboard |
SN-LKQ47-AC |
LK461-AC |
| Cyrillic keyboard |
SN-LKQ47-BT |
LK461-BT |
| Czech keyboard |
SN-LKQ47-BV |
LK461-BV |
| Danish keyboard |
SN-LKQ47-AD |
LK461-AD |
| Dutch keyboard |
SN-LKQ47-AH |
LK461-AH |
| Finnish keyboard |
SN-LKQ47-AF |
LK461-AF |
| French keyboard |
SN-LKQ47-AP |
LK461-AP |
| German keyboard |
SN-LKQ47-AG |
LK461-AG |
| Greek keyboard |
SN-LKQ47-BH |
LK461-BH |
| Hebrew keyboard |
SN-LKQ47-AT |
LK461-AT |
| Hungarian keyboard |
SN-LKQ47-BQ |
LK461-BQ |
| Italian keyboard |
SN-LKQ47-AI |
LK461-AI |
| Korean keyboard |
SN-LKQ47-BK |
- |
| Latin-American
keyboard |
SN-LKQ47-AR |
- |
| Norwegian keyboard |
SN-LKQ47-AN |
LK461-AN |
| Polish keyboard |
SN-LKQ47-BP |
LK461-BP |
| Portuguese keyboard |
SN-LKQ47-AV |
LK461-AV |
| Romanian keyboard |
- |
LK461-BL |
| S. Chinese keyboard |
SN-LKQ47-CV |
- |
| Slovak keyboard |
SN-LKQ47-CZ |
LK461-CZ |
| Spanish keyboard |
SN-LKQ47-AS |
LK461-AS |
| Swedish keyboard |
SN-LKQ47-AM |
LK461-AM |
| Swiss/French keyboard |
SN-LKQ47-AK |
LK461-AK |
| Swiss/German keyboard |
- |
LK461-AL |
| Taiwanese keyboard |
SN-LKQ47-BI |
- |
| Thai keyboard |
SN-LKQ47-CB |
- |
| Turkish keyboard |
SN-LKQ47-BU |
LK461-BU |
| Turkish/French
keyboard |
- |
LK461-BW |
| UK keyboard |
SN-LKQ47-AE |
- |
| Yugoslavian keyboard |
- |
LK461-BY |
| |
| Step 11b -
Mouse – Recommended |
|
3-button mouse |
SN-PBQWS-WA |
| |
|
|
| Step 12 - MEMORY CHANNEL
- Optional |
| Tru64 UNIX Systems |
- Requires Tru64 UNIX V5.0A or later and either TruCluster Server License
(QL--6BRAC-AA or TruCluster Plus Software Package (QP-6R9AC-AA)
|
| OpenVMS Systems |
- Requires OpenVMS V7.1-2 or later and OpenVMS Cluster license
(QL-MUZAE-AA)
|
| |
|
| Configuring Information |
- Up to one PCI to System Area Network adapters (CCMAB-AA) are supported in a single
system
- Two-node clusters can be configured by ordering a CCMAB-AA
for each system and one BN29B-04 or
BN29B-10 cable; the cable connects directly to the CCMAB-AA in each system
- For three or four system nodes, order one CCMAB-AA adapter,
one BN29B-04 or BN29B-10 cable and one CCMHB-AA; make connections from the CCMAB-AA in a
system to the CCMHB-AA
- CCMHB-AA includes four CCMLB-AA line cards and supports up
to four nodes; expansion up to eight system nodes can be achieved by adding up to four
additional CCMLB-AA line cards
- For integration of MEMORY CHANNEL hubs into cabinet
configurations, a rackmount kit (2T-MAVRK-AA) and power cord (BN35S-02) are required
|
|
|
|
|
| |
|
|
| MEMORY CHANNEL
Controller |
PCI System Area Network
Controller, maximum two |
CCMAB-AA |
| System Area Network Hub with four
line cards; includes BN19P-2E power cord for Canada, Japan, and US operations- for other regions, order appropriate power cord from list below |
CCMHB-AA |
|
Expansion line card for CCMHB hub |
CCMLB-AA |
|
1-m cable for CCMAB and CCMHB |
BN39B-01 |
|
4-m cable for CCMAB and CCMHB |
BN39B-04 |
|
10-m cable for CCMAB and CCMHB |
BN39B-10 |
|
Rackmount kit for CCMHB hub |
2T-MAVRK-AA |
|
Power cord for rackmount CCMHB
hub |
BN35S-02 |
| |
|
|
| MEMORY CHANNEL
Power Cords |
Australia, New Zealand |
BN19H-2E |
| Central Europe |
BN19C-2E |
| Denmark |
BN19K-2E |
|
Egypt, India |
BN19S-2E |
|
Ireland, United Kingdom |
BN19A-2E |
|
Israel |
BN18L-2E |
|
Italy |
BN19M-2E |
|
Switzerland |
BN19E-2E |
| |
|
|
| Step
13 - Floor Stand |
|
Floor Stand for
AlphaServer/AlphaStation DS10 |
3X-BA73P-AA |
| |
|
|
| Step 14 - Software - Required
selection of media and online documentation kit for first system on site |
|
- Software Processor Code = E
|
|
| Tru64 UNIX |
- AlphaServer DS10Tru64 UNIX systems include Base license, Unlimited User license, Server
Extension license, Internet Express, iPlanet Directory Server, iPlanet Enterprise Server,
and Compaq Secure Web Server.
|
|
| |
- AlphaStation DS10 Tru Unix systems include 2-user Base license
and Compaq Open3D traditional License
|
| When using Tru64
UNIX V5.0 or later |
Tru64 UNIX media and online
documentation on CD-ROM |
QA-6ADAA-H8 |
| Tru64 UNIX full hard copy
documentation |
QA-6ADAA-GZ |
|
StorageWorks Software Package
with licenses for Logical Storage Manager and AdvFS Utilities |
QB-5RXAE-AA |
|
TruCluster Server License |
QL-6BRAC-AA |
|
Advanced Server for Tru64 UNIX,
25 client concurrent use license |
QL-5U29M-3D |
|
Advanced Server for Tru64 UNIX,
50 client concurrent use license |
QL-5U29M-3E |
|
Advanced Server for Tru64 UNIX,
100 client concurrent use license |
QL-5U29M-3F |
|
Advanced Server for Tru64 UNIX,
250 client concurrent use license |
QL-5U29M-3G |
|
Advanced Server for Tru64 UNIX,
500 client concurrent use license |
QL-5U29M-3H |
|
Layered products media and
documentation for Tru64 UNIX on CD-ROM |
QA-054AA-H8 |
|
DECnet/OSI end-system license for
Tru64 UNIX |
QL-MTJAE-AA |
|
DECnet/OSI extended function
license for Tru64 UNIX |
QL-MTKAE-AA |
|
Open3D for Tru64 UNIX on CD-ROM,
includes graphics drivers |
QA-0AFAA-H8 |
| |
|
|
| OpenVMS |
- AlphaServer DS10 OpenVMS systems include Base license with System Manager license and
Compaq Enterprise Integration Server License Package for OpenVMS Revision V3.0A.
- AlphaStation DS10 OpenVMS systems include Base license,
Concurrent Use 1-user license, NAS 150 Client license, and Compaq Open3D traditional
license.
- Compaq Enterprise Integration Package includes licenses for
TCP/IP Services for OpenVMS, DECwindows Motif for OpenVMS Alpha, DECprint Supervisor for
OpenVMS Alpha Plus, DECprint Supervisor for OpenVMS Open, DECnet-Plus for OpenVMS Alpha
End System, Archive/Backup System for OpenVMS Management Tools, Archive/Backup Agent for
Windows NT, OpenVMS Disk Services for Windows NT, Office Server for OpenVMS, PATHWORKS 32,
PATHWORKS V6 for OpenVMS – Advanced Server, and DIGITAL Office Server Client Access
License
|
|
|
|
OpenVMS V7.1-2 media and online
documentation on CD-ROM |
QA-MT1AR-H8 |
|
OpenVMS V7.2-1 media and online
documentation on CD-ROM |
QA-MT1AT-H8 |
|
OpenVMS media and online
documentation on CD-ROM |
QA-MT1AA-H8 |
|
OpenVMS hard copy documentation |
QA-001AA-GZ |
|
Layered products media and
documentation for OpenVMS on CD-ROM |
QA-03XAA-H8 |
|
Open3D for OpenVMS on CD-ROM,
includes graphics drivers |
QA-0ADAA-H8 |
|
- OpenVMS Concurrent Use licenses provide the right to interactively use the operating
system by the specified number of concurrent users on a designated OpenVMS system. OpenVMS
Concurrent Use licenses can be moved from one system to another at user discretion and can
be shared in a mixed OpenVMS VAX and OpenVMS Alpha cluster.
- OpenVMS Traditional Unlimited Use license is system specific
and can only be used on one single system at a time. It cannot be shared between systems
or in an OpenVMS VAX or OpenVMS Alpha Cluster.
|
|
|
Concurrent Use 1-user license |
QL-MT3AA-3B |
|
Concurrent Use 2-user license |
QL-MT3AA-3C |
|
Concurrent Use 4-user license |
QL-MT3AA-3D |
|
Concurrent Use 8-user license |
QL-MT3AA-3E |
|
Concurrent Use 16-user license |
QL-MT3AA-3F |
|
Concurrent Use 32-user license |
QL-MT3AA-3G |
|
Concurrent Use 64-user license |
QL-MT3AA-3H |
|
Concurrent Use 128-user license |
QL-MT3AA-3J |
|
Concurrent Use 256-user license |
QL-MT3AA-3K |
|
Traditional Unlimited User
license |
QL-MT2AE-AA |
|
OpenVMS Cluster license for Alpha
systems |
QL-MUZAC-AA |
|
OpenVMS Cluster Client license
for Alpha systems |
QL-3MRAC-AA |
|
OpenVMS Cluster Client-to-Full
OpenVMS Cluster Migration- license |
QL-6J7AC-AA |
| |
|
|
| Step 15 - Hardware and
Software Support Services |
|
- Select one of the optional CarePaq Priority Service Packages described below that best
supports the customer’s operational requirements for system availability.
|
| CarePaq Priority Services |
- CarePaq Priority Services are available for Compaq AlphaServer/AlphaStation systems
running Compaq Tru64 UNIX or OpenVMS operating systems. Priority Services are designed for
the growing number of customers who need support beyond the basic warranty. Five packages
are offered - Priority, Priority 24, Priority Silver, Priority Gold, and Priority
Executive with coverage for both Principal servers/stations and SSPs (Subsequent System
Packages) - that meet a full range of customer support
requirements.
|
| |
|
| Program Features –
Principal Server/Station |
|
| Priority |
- 9x5 HW/SW support
- 4-hour response on-site hardware support
- 2-hour response for Bronze software support
- License Subscription for Compaq O/S software and embedded
L/P (i.e., EIS for OpenVMS, unlimited users, and server extensions for Tru64 UNIX)
- Condist update distribution for OpenVMS or Tru64 UNIX and
their layered products. (Layered products not included on Condist can be ordered
separately.)
|
|
|
|
|
| |
|
| Priority 24 |
- 24x7 HW/SW support
- Named HW engineer
- 4-hour response on-site hardware support
- 2-hour response for Bronze software support
- License Subscription for Compaq O/S software and embedded
L/P (i.e., EIS for OpenVMS, unlimited users, and server extensions for Tru64 UNIX)
- Condist update distribution for OpenVMS or Tru64 UNIX and
their layered products. (Layered products not included on Condist can be ordered
separately.)
|
|
|
|
|
|
|
|
|
| Priority Silver |
- 24x7 HW Support with Named Engineer, 4-hour response
- 24x7 Silver SW Support - Named Account Rep, 1-hour response
Monday – Friday, 8AM-5PM local time; 2-hour response remaining hours
- License Subscription for Compaq O/S software and embedded
L/P (i.e., EIS for OpenVMS, unlimited users, and server extensions for Tru64 UNIX)
- Condist update distribution for OpenVMS or Tru64 UNIX and
their layered products. (Layered products not included on Condist can be ordered
separately.)
- Technical newsletter and SW activity review
- Proactive Patch Notification
- One (1) System Healthcheck per year
|
|
|
|
|
|
|
| |
|
| Priority Gold |
- 24x7 HW support with Named Engineer, 4-hour response for on-site support
- 24x7 Gold SW support - Named Account Rep
- 30-minute callback (critical); 1-hour callback
(non-critical)
- License Subscription for Compaq O/S software and embedded
L/P (i.e., EIS for OpenVMS, unlimited users, and server extensions for Tru64 UNIX)
- Condist update distribution for OpenVMS or Tru64 UNIX and
their layered products. (Layered products not included on Condist can be ordered
separately.)
- Technical newsletter, SW activity review and 10 hours
Upgrade impact planning
- Proactive Revision Management
- Two (2) System Healthchecks per year
- Mandatory pre-qualification required
|
|
|
|
|
|
|
|
|
| |
|
| Priority Gold Executive |
- 24x7 HW support with Named Engineer, two-hour response for on-site support
- 24x7 Gold SW support - Named Account Rep
- 30-minute callback (critical); one-hour callback
(non-critical)
- License Subscription for Compaq O/S software and embedded
L/P (i.e., EIS for OpenVMS, unlimited users, and server extensions for Tru64 UNIX)
- Software update distribution on CD-ROM: OpenVMS or Tru64
UNIX and their layered products (Layered products not included on Condist can be ordered
separately.)
- Technical newsletter, SW activity review and 10 hours
Upgrade impact planning
- Proactive Revision Management
- Two (2) System Healthchecks per year
- Customer site must be within 25 miles of a Compaq service
location
- Mandatory pre-qualification required
|
| |
|
| Program Features
– Additional Services |
|
| SSPs (Subsequent System
Packages) |
- For Priority, Priority 24, Priority Silver, Priority Gold, and Priority Gold Executive
- HW Support at same level as corresponding package for
Principal server/station
- License Subscription: Compaq O/S (where applicable)
- Telephone support through Principal server/station covered
by full support package
|
|
|
| |
|
| Installation |
- Pre-installation review
- Unpacking of equipment
- Assemble and test
- Basic product usage info
- No software installation added
|
| |
|
| Installation & Startup
Compaq O/S |
- Pre-installation review
- Unpacking of equipment
- Assemble and test
- Basic product usage info
- Install operating systems
- Product configuration
- Print and network access
- Orientation
|
| |
|
Model/CarePaq
Priority Service |
Principal
Server
1 year |
Principal
Server
3 years |
Subsequent
Systems
1 year |
Subsequent
Systems
3 years |
| AlphaServer/AlphaStation
DS10 |
| Priority |
FP-A01BA-12 |
FP-A01BA-36 |
FP-A21BA-12 |
FP-A21BA-36 |
| Priority 24 |
FP-A02BA
–12 |
FP-A02BA-36 |
FP-A22BA-12 |
FP-A22BA-36 |
| Priority Silver |
FP-A04BA-12 |
FP-A04BA-36 |
FP-A24BA-12 |
FP-A24BA-36 |
| Priority Gold |
FP-A08BA-12 |
FP-A08BA-36 |
FP-A28BA-12 |
FP-A28BA-36 |
| Priority Gold Exec. |
FP-A09BA-12 |
FP-A09BA-36 |
FP-A29BA-12 |
FP-A29BA-36 |
| Installation |
FP-AINST-BA |
FP-AINST-BA |
FP-AINST-BA |
FP-AINST-BA |
| Installation &
Startup |
FP-ASTAR-BA |
FP-ASTAR-BA |
FP-ASTAR-BA |
FP-ASTAR-BA |
|
|
Notes:
- AlphaServer/AlphaStation DS10 systems include three years hardware warranty with 5x9,
on-site Next Business Day response.
- New Compaq hardware options internal to the AlphaServer/AlphaStation enclosure receive
the same warranty or service level as purchased with the server or station.
- External storage devices/cabinets carry their own level of warranty and should be quoted
separately for uplifted warranty services (CarePaq Priority Service).
- In addition to the CarePaq Priority Services, uplifted warranty Supplemental Services
are available for separate hardware and software support. For more information on Hardware
and Software Supplemental Services and other Compaq service options available for
AlphaServers and AlphaStations, consult your Compaq Sales Account Manager or visit
http://www.compaq.com/services/
|
|
