contents
 Overview      Product Highlights      Service and Support, HP Care Pack and Warranty Information      Technical Specifications line.gif (50 bytes)

Overview

Compaq Three-Channel Backplane RAID Controller (DS-KZPCC-CE)

 
 
1. Battery Module 7. SCSI bus expansion module internal 68-pin SCSI connectors
2. Battery Module Connector 8. External Ultra2 SCSI connector (SCSI A)
3. Battery 9. Internal 68-pin SCSI connector
4. SCSI bus expansion module external Ultra2 SCSI connectors (SCSI B & SCSI C) 10. Cache memory DIMM sockets (64 MB installed)
5. Two-channel SCSI bus expansion module 11. KZPCC Backplane RAID Controller main board
6. SCSI bus expansion module connectors    
Models

DS-KZPCC-CE (Rev. D01)

Introduction
The Three-Channel Backplane RAID controller (DS-KZPCC-CE) is a high-performance, 3-channel, 64-bit PCI to Ultra2/LVD SCSI Backplane RAID controller with 64-MB cache and battery backup.
DS-KZPCC-CE is supported on the following AlphaServers/AlphaStations:
Systems Maximum # Supported NOTES
AlphaServer 800 1 Supported as a data device only. No boot support.
AlphaStation XP1000 1  
AlphaServer DS10, AlphaStation XP900 2  
AlphaServer DS20E (EV67 Pass 2.6 and up and EV68 CPUs) 2  
AlphaServer DS25 3  
AlphaServer ES40 8  
AlphaServer ES45 8  
AlphaServer GS80, GS160, GS320 8  
 
The DS-KZPCC-CE controller is supported with the following versions of the Tru64 UNIX operating system:
  • Tru64 UNIX V4.0F with required New Hardware Delivery – 3 Kit (NHD 3) or later – CD-ROM part number is QA-MT4AX-H8
  • Tru64 UNIX V4.0G
  • Tru64 UNIX V5.1 with Patch Kit 4 or later
  • Tru64 UNIX V5.1A
  • Tru64 UNIX V5.1B
  • TruCluster V5.1A; requires Patch Kit 1 (BL1) (T64V51AB01AS0001-2002mmdd.tar) or later
  • TruCluster V5.1B
Minimum Supported Hardware/Software Revisions for DS-KZPCC-CE
Controllers for Tru64 UNIX V4.0F, V4.0G, V5.1, and V5.1A

Tru64 UNIX Versions

 V4.0F with NHD3 V4.0G V5.1 with PK4 V5.1A V5.1B BA610-6D Enclosures
Hardware A01 C01 C01 D01 D01 D01
Firmware CQZ2 CQZ2 CQZ2 CQ16 CQ16 CQ16
SMOR Smor
0021.111		 Smor
0033.112		 Smor
0033.112		 Smor
0033.112		 Smor
0033.112		 Smor
0033.112
SWCC V2.2 V2.3 V2.3 V2.3 V2.31 V2.3
SRM console V5.7 V5.8* V5.8* V6.0 V6.0 V6.0
*V6.0 SRM console revision (or higher versions when released) is recommended
V6.0 SRM console revision is minimum for GS80/GS160/GS320
Benefits at a Glance
  • Supports 9.1-GB, 18.2-GB, 36.4-GB, 72.8-GB, and 146-GB disk drives
  • Ultra2/LVD support for AlphaServers
  • 64-MB Cache
  • Supports up to 14 SCSI devices per channel (with StorageWorks™ Enclosure 4314 Ultra3/LVD) *
  • Support for Internal Card Cage (BA610-6D) on AlphaServer DS20E, ES40, and ES45
NOTE: * Dual bus configuration on the StorageWorks Enclosure Model 4254 Ultra2/LVD and 4354 Ultra3/LVD device shelves only allows seven drives per channel.
Key Features
  • I20 shell compliant interface
  • RAID Level: 0, 1, 5, 0 + 1, 0 +5, and JBOD
  • Three Ultra2/LVD Channels
  • Tru64 UNIX 4.0F, V4.0G, V5.1, V5.1A and V5.1B boot support, TruCluster V5.1A and V5.1B
  • Support for StorageWorks Command Console (SWCC)
  • Alpha SMOR off-line configuration utility
  • Add storage capacity on-line
  • Battery backup of 24 hours with 64-MB of cache memory
  • Hot, warm, and cold swap
  • Up to 14 devices per channel (only seven drives with the StorageWorks Enclosure Model 4254 Ultra2/LVD and 4354 Ultra 3/LVD device shelves)
  • Internal Card Cage (BA610-6D) on AlphaServer DS20E, ES40, and ES45
contents
 Overview      Product Highlights      Service and Support, HP Care Pack and Warranty Information      Technical Specifications line.gif (50 bytes)

Product Highlights

Capacity
  • Supports up to 14 SCSI drives per channel on StorageWorks Enclosure 4314 Ultra3/LVD (only seven drives with the StorageWorks Enclosure Model 4254 Ultra2/LVD and 4354 Ultra3/LVD device shelves)
  • Supports 9.1-GB and 18.2-GB Ultra2 drives; 9.1-GB, 18.2-GB, 36.4-GB, 72.8-GB, and 146-GB Ultra320/Ultra3/Ultra2 10K rpm capable drives; 9.1-GB and 18.2-GB Ultra3/Ultra2 15K rpm capable drives (Only supports Ultra320/Ultra3 drives at Ultra2 speeds)
  • Supports online storage capacity adds
  • Supports Six Slot Internal Card Cage (BA610-6D) on AlphaServer DS20E, ES40, and ES45

Manageability

 Support for StorageWorks Command Console (SWCC) & Alpha SMOR off-line configuration utility.
Options Supported KZPCC 64-MB Memory Cache Replacement DS-MS100-DE
  KZPCC Battery Backup Replacement DS-KZPCC-UB
contents
 Overview      Product Highlights      Service and Support, HP Care Pack and Warranty Information      Technical Specifications line.gif (50 bytes)

Service and Support, HP Care Pack and Warranty Information
Software Product Services
  • Stand-alone telephone support
  • Rights to new license version
  • Media and documentation updates
Hardware Product Services
  • Installation services
  • On-site maintenance (includes warranty support)
  • Response time upgrades during the warranty period
  • Post-warranty coverage
  • RAID setup and performance consulting via statement of work
  For additional hardware installation and maintenance information, refer to the following Web pages:
http://h18005.www1.hp.com/services/carepaq/us/install/cp_storage.html
http://h18005.www1.hp.com/services/carepaq/us/hardware/cp_storage.html
Warranty Upgrade Options
  • Response - Upgrade on-site response from next business day to same day 4 hours
  • Coverage - Extend hours of coverage from 5 days x 9 hours to 7 days x 24 hours
  • Duration - Select duration of coverage for a period of 1, 3, or 5 years
  NOTE: Certain restrictions and exclusions apply. Consult the Customer Support Center for details.
HP Care Pack Information
Sample part numbers:		 3-year, uplift to 5 x 9, Next Day Response
FM-**XHW-36
3-year, uplift to 5 x 9, 4-hour Response
FM-**4HR-36
3-year, uplift to 7 x 24, 4-hour Response
FM-**724-36
  ** represents a two-digit, product-specific code  
 
  • HP Care Pack is defined as an upgrade to the product warranty attribute, available for a specific duration and hours of coverage.
  • HP Care Pack is not available for less than the product's warranty duration.
  • HP Care Pack is available for sale anytime during the warranty period for most products, but the commencement date will be the same as the Warranty Start Date (delivery date to end user customer). Proof of purchase may be required.
  • HP Care Pack services are prepaid.
  For additional HP Care Pack (hardware & software) information as well as orderable part numbers, refer to the following Web page:
http://h18005.www1.hp.com/services/carepaq/index.html
Components The following brick level options/components do not have individual HP Care Pack services. These items will be included in product HP Care Pack services into which they are installed.
  Disk Drives Tape Drives CD/DVD ROM SCSI Hubs in SBBs Adapters
  Bus Converters Backplane RAID Controllers Power Supplies Cabling Fans
contents
 Overview      Product Highlights      Service and Support, HP Care Pack and Warranty Information      Technical Specifications line.gif (50 bytes)

Technical Specifications
Protocol Support Ultra2/LVD
Processor Support EV6, EV67, and EV68
Drive Support 9.1-GB and 18.2-GB Ultra2 drives
9.1-GB, 18.2-GB, 36.4-GB, 72.8-GB, and 146-GB Ultra320/Ultra3/Ultra2 10K rpm capable drives
9.1-GB and 18.2-GB Ultra3/Ultra2 15K rpm capable drives
(Only supports Ultra320/Ultra3 drives at Ultra2 speeds)
O/S Support Tru64 UNIX V4.0F with required New Hardware Delivery – 3 Kit (NHD 3) or later, Tru64 UNIX V4.0G and Tru64 UNIX V5.1 with Patch Kit 4 or later, Tru64 UNIX V5.1A and Tru64 UNIX V5.1B
TruCluster V5.1A with Patch Kit 1 (BL1) (T64V51aB01AS0001-2002mmdd.tar) or later, TruCluster V5.1B
UPC Codes DS-KZPCC-CE 613326187951
DS-MS100-DC 613326186725
Environmental Temperature Operating 32° to 127° F (0° to 55° C)
Relative Humidity Operating 10% to 90% non-condensing
Altitude Operating 0 to 9,842.5 ft (0 to 3,000 m)
Mechanical Specifications Dimensions (HxWxD) Product 0.67 x 12.35 x 3.87 in
(1.7 x 31.37 x 9.84 cm)
Shipping 2.75 x 16.5 x 9.5 in
(6.98 x 41.91 x 24.13 cm)
Weight Product 1.1 lb (0.499 kg)
Shipping 2 lb (0.907 kg)
Electrical Under normal operating conditions, the power characteristics of the adapter are as specified in the table below:
Specification Value  
Power Dissipation 25W Maximum  
Current Requirement 1.87A typical  
Input Voltage Requirement 5V ± 5%  
Power Supply Voltage Ripple Requirement 50mV peak-to-peak maximum  
Reliability MTBF = 500,000 hours @ 86°F (30°C)
© Copyright 2003 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
   DA-10546 - U.S. - Version 18 - May 7, 2004