  |
Overview
|
|
Overview
|
Compaq ProLiant DL760
|
||||||||||||||||||||||||||||||||
What's New |
|
| At A Glance |
|
|
|
Standard Features
| Processor One of the following depending on Model: |
Intel Pentium III Xeon processors 900 MHz | ||
| Intel Pentium III Xeon processors 700 MHz | |||
|
|
|||
| Cache
Memory One of the following depending on Model: |
2-MB level 2 writeback cache per processor standard (NOTE: Available with 900 MHz 4P Models or 700 MHz 4P Models.) |
||
| 1-MB level 2 writeback cache per processor standard (NOTE: Available with 700 MHz 2P Models only.) |
|||
|
|
|||
| Cache Accelerator | Two Cache Accelerators Standard | ||
|
|
|||
| Upgradability | Upgradable to eight processors | ||
|
|
|||
| Chipset | Profusion developed and licensed by Compaq | ||
|
|
|||
| Memory One of the following depending on Model: |
Standard | 2048 MB ECC protected 100MHz ECC SDRAM DIMMs (4P Models) |
|
| Maximum | 16 GB | ||
| Standard | 1024 MB ECC protected 100MHz ECC SDRAM DIMMs (2P Models) |
||
| Maximum | 16 GB | ||
|
|
|||
| Network Controller | Integrated Compaq NC3134 Fast Ethernet NIC 64 PCI Dual Port 10/100 in a slot, upgradeable to Gigabit | ||
|
|
|||
| Expansion Slots | I/O (11 Total – 64-bit PCI-X and PCI, all Hot Pluggable) | PCI Voltage: | |
| PCI-X 100-MHz or PCI 66-MHz (Hot Plug) | 2 (Tertiary – slots 10, 11) Optimized for PCI-X 133MHz and PCI 66MHz adapters | 3.3 Volt (keyed for 3.3 Volt or universal PCI-X/ PCI cards) | |
| PCI-X 50-MHz or PCI 33-MHz (Hot Plug) | 6 (Secondary – slots 1, 2, 3, 4, 5, 6) Optimized for PCI-X 66MHz adapters | 53.3 Volt (keyed for 3.3 Volt or universal PCI-X/ PCI cards) | |
| PCI 33-MHz (Hot Plug) | 3 (Primary – slots 7, 8, 9) | 5 Volt (keyed for 5 Volt PCI or universal cards) | |
| NOTE: For more information regarding PCI-X, please see the following URL: http://h18000.www1.hp.com/products/servers/technology/pci-x-enablement.html. | |||
| | |||
| Storage Controllers | Integrated Smart Array Controller supports (Ultra2 or Ultra3 hard drives at Ultra2 speed) (One Internal Channel for RAID Capability for internal drives and one External Channel for tape support only) | ||
| NOTE: The Integrated Smart Array Controller is embedded on the system board. | |||
| Optional support for Ultra3 storage controller in an I/O slot | |||
|
|
|||
| Storage | Diskette Drives | Integrated 1.44 MB Floppy Drive |
| CD-ROM | Integrated 24x IDE CD-ROM drive Low-Profile | |
| Hard Drives | None | |
| Maximum Internal
Storage |
587.2 GB (4 x 146.8 GB Ultra320 1" Drives) (internal hot plug cage only) | |
|
|
||
| Interfaces | Parallel | 1 |
| Serial | 2 | |
| Pointing Device (Mouse) | 1 | |
| Graphics | 1 | |
| Keyboard | 1 | |
| SCSI Tape Port (VHDCI) | 1 | |
| Network RJ-45 | 2 | |
|
|
||
| Graphics | Integrated 1280 x 1024 x 256 colors PCI Video controller with 2 MB of video SDRAM memory |
|
|
|
| Form Factor | 7U Rack Form Factor;
Ships with sliding rack rails and cable management arm; Standard 19 in (48.3 cm) rack-mountable |
| | |
|
ProLiant Essentials Foundation Pack Software |
| ||
| |||
| |||
| |||
| |||
| |||
| |||
| NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to http://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more information.
NOTE: For more information regarding ProLiant Essentials Software, please see the following URL: http://www.hp.com/servers/proliantessentials. | |||
| | |||
| Industry Standard Compliance | ACPI 1.0b Compliant |
| PCI-X and PCI 2.2 Compliant | |
| PAE Support | |
| Microsoft® Logo certifications | |
|
|
|
| Manageability |
Insight Manager 7 |
|
|
|
| Availability | PCI-X/PCI Hot Plug with push button functionality Redundant Hot Plug Fans Smart Array 5300 Controller (optional) Dynamic sector repairing and drive parameter tracking (with Smart Array controllers) Redundant Processor Power Modules Redundant/adaptive load balancing NIC Support Hot Plug Dual Port 10/100 TX NIC Redundant Hot Plug Power Supplies ECC Memory |
|
|
|
| Security | Power-on password Hot plug keyboard password Diskette drive control Diskette boot control Network server mode Security provision Parallel and serial interface control Administrator's password Disk configuration lock Hot plug access security |
|
|
|
| Server Power Cords | Two Lowline power cords & two Highline power cords ships standard |
|
| |
| Power Supply | Two Redundant Hot Plug 1150/500-Watt power supplies per system. Power supplies are load sharing and provide 1150 Watts of Redundant power for 220 volt input or 500 Watts of Redundant power for 110 volt input. |
| NOTE: To ensure redundancy of server power, HP recommends that 200-240 VAC power be used for all deployments. This will ensure that both power supplies can support up to their maximum configurations, and remain in a redundant power supply state. | |
| NOTE: A maximum of two power supplies are supported. | |
|
|
|
| System Fans | Two Hot-Plug redundant fans ship standard. Two maximum supported. |
|
|
|
| Required Cabling | For required cabling information, refer to the Web site at: http://h18000.www1.hp.com/products/servers/ProLiantDL760/. |
| | |
| OS Support | Microsoft Windows NT®
4.0 Server Microsoft Windows 2000 Novell NetWare SCO UnixWare® LINUX (Red Hat, SuSE, TurboLinux Server, Caldera eServer) Sun Solaris Intel Platform Edition Microsoft Windows 2000 Datacenter Edition |
| NOTE:
The Microsoft Windows 2000 Datacenter Edition is available only as part of
a Data Center solution. NOTE: For a more complete and up-to-date listing of supported OS's and versions, please visit our OS Support Matrix at: ftp://ftp.compaq.com/pub/products/servers/os-support-matrix-310.pdf. | |
| NOTE: For an up-to-date listing of the latest drivers available for the ProLiant DL760 G2, please see: http://h18023.www1.hp.com/support/files/server/us/index.html. | |
| | |
| Data Center | Data Center services and support offerings are available with Data Center solutions. |
|
|
|
| Rack Airflow Requirements |
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage. |
| NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with the server, or to the server documentation located in the Support section at the following URL: http://h18000.www1.hp.com/products/servers/ProLiantdl760/index.html. | |
| | |
| Service and Support | HP Services provides
a three-year, limited warranty, including Pre-Failure Warranty (coverage of hard
drives, memory and processors) fully supported by a worldwide network of resellers
and service providers. HP technical assistance is available 7x24, toll free in
the United States and Canada. Telephone support services may be covered under
warranty or available for an additional fee. NOTE: Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. A full range of HP Care Pack packaged hardware and software services:
NOTE: For more information, customer/resellers can contact http://www.hp.com/hps/. Please
see the following URL regarding Warranty Information For Your HP Products: For additional information regarding Worldwide Limited Warranty and Technical Support, please see the following URL: ftp://ftp.compaq.com/pub/supportinformation/ejourney/176738.pdf. |
| NOTE: Certain restrictions and exclusions may apply. Consult the Customer Support Center for details. |
|
|
Models
|
Model DL760R01 X900-2MB, 2048MB (4P) 212692-001 |
Processor(s) | (4) Intel Pentium III Xeon 900 MHz standard (up to 8 supported) |
| Cache Memory | 2-MB Level 2 writeback per processor | |
| Memory | 2048 MB (Standard) to 16 GB (Maximum) 100MHz ECC SDRAM DIMM | |
| Network Controller | Integrated Compaq NC3134 Fast Ethernet NIC 64 PCI Dual Port 10/100 in a slot | |
| Storage Controller | Integrated Smart Array Controller | |
| Hard Drives | None | |
| Internal Storage | 587.2 GB maximum (with optional hard drives) | |
| Cache Accelerator | Two Standard | |
| Optical Drive | 24x IDE CD-ROM Drive | |
| I/O Slots | PCI and PCI-X | |
| Form Factor | 7U Rack Form Factor | |
|
|
||
|
Model DL760R01 X700-2MB, 2048MB (4P) 177657-001 |
Processor(s) | (4) Intel Pentium III Xeon 700 MHz standard (up to 8 supported) |
| Cache Memory | 2-MB Level 2 writeback per processor | |
| Memory | 2048 MB (Standard) to 16 GB (Maximum) 100MHz ECC SDRAM DIMM | |
| Network Controller | Integrated Compaq NC3134 Fast Ethernet NIC 64 PCI Dual Port 10/100 in a slot | |
| Storage Controller | Integrated Smart Array Controller | |
| Hard Drives | None | |
| Internal Storage | 587.2 GB maximum (with optional hard drives) | |
| Cache Accelerator | Two Standard | |
| Optical Drive | 24x IDE CD-ROM Drive | |
| I/O Slots | PCI and PCI-X | |
| Form Factor | 7U Rack Form Factor | |
|
|
||
|
Model DL760R01 X700-1MB, 1024MB (2P) 177656-001 |
Processor(s) | (2) Intel Pentium III Xeon 700 MHz standard (up to 8 supported) |
| Cache Memory | 2-MB Level 2 writeback per processor | |
| Memory | 1024 MB (Standard) to 16 GB (Maximum) 100MHz ECC SDRAM DIMM | |
| Network Controller | Integrated Compaq NC3134 Fast Ethernet NIC 64 PCI Dual Port 10/100 in a slot | |
| Storage Controller | Integrated Smart Array Controller | |
| Hard Drives | None | |
| Internal Storage | 587.2 GB maximum (with optional hard drives) | |
| Cache Accelerator | Two Standard | |
| Optical Drive | 24x IDE CD-ROM Drive | |
| I/O Slots | PCI and PCI-X | |
| Form Factor | 7U Rack Form Factor | |
|
|
||
|
|
Options
| ProLiant 8500 Supported Upgrade Option Kits | NOTE: These options are only supported in the ProLiant 8500 server. | ||
| ProLiant 8500 Pentium III Xeon 550 MHz to 900 MHz Processor Upgrade Kit |
232291-B21
|
||
| NOTE: This upgrade kit (PN 232291-B21) enables customers to upgrade from 550 MHz Pentium III Xeon processor technology to 900 MHz Pentium III Xeon processor technology. | |||
| NOTE: The
upgrade kit includes the following: – Includes 4 x Pentium III Xeon 900MHz/2MB processors – New processor/memory drawer – Rom BootBlock chip, and chip removal tool – Service event (Installation) – Detailed instructions guide |
|||
| NOTE: This Upgrade Kit (PN 232291-B21) is only supported by the ProLiant 8500 server. | |||
| ProLiant 8500 Pentium III Xeon 550 MHz to 700 MHz Processor Upgrade Kit |
200799-B21
|
||
| NOTE: This upgrade kit (PN 200799-B21) enables customers to upgrade from 550 MHz Pentium III Xeon processor technology to 700 MHz Pentium III Xeon processor technology. | |||
| NOTE: This Upgrade Kit (PN 200799-B21) is only supported by the ProLiant 8500 server. | |||
|
|
|||
| ProLiant
Essentials Value Pack Software |
Rapid Deployment
Pack, 1 User, V1.x NOTE: This license allows 1 server to be managed and deployed via the Deployment Server. |
267196-B21 |
|
| Rapid Deployment
Pack, 10 Users, V1.x NOTE: This license allows 10 servers to be managed and deployed via the Deployment Server. |
269817-B21
|
||
| ProLiant Essentials Workload Management Pack (Featuring Compaq Resource Partitioning Manager version 2.0) |
303284-B21
|
||
| ProLiant Essentials Performance Management Pack v2.0, Single License |
306696-B21
|
||
| NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer to http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value Pack product QuickSpecs for more information. | |||
| NOTE: For more information regarding ProLiant Essentials Software, please see the following URL: http://www.hp.com/servers/proliantessentials. | |||
|
|
|||
| Software | HP digital asset protection | 302316-001 |
|
|
||
| NetServer to ProLiant integrations services | HP NetServer to ProLiant
integration and assessment service |
304164-002
|
| NOTE: HP identifies current levels of NetServer support, services, and management. This service helps maximize customer’s ability to add ProLiant platforms into their current environment. | ||
| HP TopTools to Insight
Manager 7 installation and startup service |
304163-002
|
|
| NOTE: Provides on-site review, installation and configuration services for Insight Manager 7. HP will also re-create, as closely as possible, the views and reports from the customer’s current TopTools configuration. This service assures a smooth transition to the ProLiant Essentials software. | ||
| HP NetServer to ProLiant Essentials Rapid Deployment Pack installation and startup service |
304162-002
|
|
| NOTE: Install and configure Rapid Deployment Pack in a test environment, then deploy a server image to a maximum of 250 systems in the production environment. This service helps to assure successful system deployment. | ||
|
|
||
| Processor | NOTE: Pentium III Xeon 550MHz, 700 MHz, or 900 MHz processors cannot be mixed in the same server. They all have to be of the same speed. | |
| Pentium III Xeon X900-2MB Processor
Option Kit |
177666-B21 |
|
| NOTE: This processor option kit (PN 177666-B21) supports the ProLiant DL760, ProLiant ML750, ProLiant 8500, and the ProLiant 8000 servers. | ||
| Pentium III Xeon X700-2MB Processor Option Kit |
175810-B21
|
|
| NOTE: This processor option kit (PN 175810-B21) supports the ProLiant DL760, ProLiant ML750, ProLiant 8500, and the ProLiant 8000 servers. | ||
| Pentium III Xeon X700-1MB Processor Option Kit |
167444-B21
|
|
| NOTE: This processor option kit (PN 167444-B21) supports the ProLiant DL760, ProLiant ML750, ProLiant 8500, and the ProLiant 8000 servers. | ||
|
|
||
|
Memory |
2048-MB 100MHz ECC SDRAM DIMM Memory Expansion Kit (2 x 1024 MB) |
328809-B21
|
| 1024-MB 100MHz ECC SDRAM DIMM Memory Expansion Kit (2 x 512 MB) |
328808-B21
|
|
| 512-MB 100MHz ECC SDRAM DIMM Memory Expansion Kit (2 x 256 MB) |
328807-B21
|
|
| 256-MB 100MHz ECC SDRAM DIMM Memory Expansion Kit (2 x 128 MB) |
328806-B21
|
|
|
|
||
| Hard Drives | Ultra 320 SCSI – Universal Hot Plug | |
| 36.4GB 10,000 rpm, U320 Universal Hard Drive, 1" |
286713-B22 | |
| 72.8GB 10,000 rpm, U320 Universal Hard Drive, 1" |
286714-B22 | |
| 146.8GB 10,000 rpm, U320 Universal Hard Drive, 1" |
286716-B22 | |
| 18.2GB 15,000 rpm, U320 Universal Hard Drive, 1" |
286775-B22 | |
| 36.4GB 15,000 rpm, U320 Universal Hard Drive, 1" |
286776-B22 | |
| 72.8GB 15,000 rpm, U320 Universal Hard Drive, 1" |
286778-B22 | |
| NOTE: All U320 Universal Hard Drives are backward compatible to U2 or U3 speeds. U320 drives require an optional U320 Smart Array Controller or U320 SCSI HBA to support U320 transfer rates. | ||
|
NOTE: Please see the Hard Drive QuickSpecs for Technical Specifications
such as capacity, height, width, interface, transfer rate, seek time, physical
configuration, and operating temperature: | ||
| | ||
| Storage Controllers | Smart Array 532 Controller | 225338-B21 |
| Smart Array 5302/128 Controller | 283552-B21 | |
| Smart Array 5304/256 Controller |
283551-B21 | |
|
Smart Array 5312 Controller |
238633-B21 | |
|
Ultra3 Channel Expansion Module for Smart Array 5300 Controller |
153507-B21 | |
|
128-MB Cache Module for Smart Array 5302 Controller |
153506-B21 | |
|
RAID ADG Upgrade for Smart Array 5302 |
288601-B21 | |
|
256-MB Battery-Backed Cache Module |
254786-B21 | |
| NOTE: This 256-MB Battery-Backed Cache Module supports the Smart Array 5300 series controllers, MSA 1000 and the Smart Array Cluster Storage. | ||
| 64-bit/66-MHz Single Channel Wide Ultra3 SCSI Adapter |
154457-B21 | |
| 64-bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter |
129803-B21 | |
| 64-Bit/133MHz
Dual Channel Ultra320 SCSI Adapter |
268351-B21 | |
| 64-Bit/66-MHz
Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS |
284688-B21 | |
| NOTE:
Please see the following Controller or SCSI Adapter QuickSpecs for Technical
Specifications such as PCI Bus, PCI Peak Data Transfer Rate, SCSI Protocols supported,
SCSI Peak Data Transfer Rate, Channels, SCSI Ports, Drives supported, Cache, RAID
support, and additional information: http://h18000.www1.hp.com/products/quickspecs/10851_na/10851_na.html (Smart Array 532) http://h18000.www1.hp.com/products/quickspecs/10640_na/10640_na.html (Smart Array 5300 Series) http://h18000.www1.hp.com/products/quickspecs/11328_na/11328_na.html (Smart Array 5312) http://h18000.www1.hp.com/products/quickspecs/10429_na/10429_na.html (SCSI Adapter) http://h18000.www1.hp.com/products/quickspecs/11555_na/11555_na.html (U320 Adapter) |
| |
|
Communications |
Compaq NC3123 Fast Ethernet NIC PCI 10/100 WOL |
174830-B21
|
|
Compaq NC3134 Fast Ethernet NIC 64 PCI Dual Port 10/100 |
138603-B21 |
|
|
Compaq NC3135 Fast Ethernet Upgrade Module |
138604-B21 |
|
|
Compaq NC6132 Gigabit Module 1000 SX Upgrade Module for NC3134 and NC3131 |
338456-B23 |
|
|
Compaq NC6133 Gigabit Module 1000LX Upgrade Module for NC3134 and NC3131 |
338456-B24 |
|
|
Compaq NC3133 Fast Ethernet Module 100FX Upgrade Module for NC3134 and NC3131 |
338456-B25 |
|
|
Compaq NC6136 Gigabit Server Adapter, 64-bit/66-MHz, PCI, 1000 SX |
203539-B21 |
|
| Compaq NC7131 Gigabit Server Adapter, 64-bit/66-MHz, PCI, 10/100/1000-T |
158575-B21
|
|
| Compaq NC7132 10/100/1000-T Upgrade
Module for NC3134 and NC3131 |
153543-B21
|
|
| Compaq NC7770 PCI-X Gigabit Server
Adapter |
244948-B21
|
|
|
|
||
|
Redundant Options |
1150/500-Watt Hot Plug N 1 redundant power supply |
401231-001 |
|
NOTE: A maximum of two power supplies are supported by the ProLiant DL760. |
||
|
|
||
|
Management Options |
Remote Insight Lights-Out Edition II |
227251-001 |
|
|
||
| Security | HP/Atalla AXL600L SSL Accelerator Card for ProLiant Servers |
524545-B21 |
| Compaq AXL300 Accelerator PCI Card (HW SSL Encryption) for ProLiant Servers |
227933-B21 |
|
|
|
||
| Monitors |
|
||||||||||||||
|
|||||||||||||||
|
|||||||||||||||
|
|||||||||||||||
|
|
|||||||||||||||
|
Tape Drives |
| |||||||||||||||||||
| ||||||||||||||||||||
| ||||||||||||||||||||
| ||||||||||||||||||||
| ||||||||||||||||||||
| ||||||||||||||||||||
| ||||||||||||||||||||
| ||||||||||||||||||||
| ||||||||||||||||||||
| ||||||||||||||||||||
| ||||||||||||||||||||
|
| ||||||||||||||||||||
| Tape Automation |
| |||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
| ||||||||||||||||||||||||||
|
| ||||||||||||||||||||||||||
| Smart Array ClusterStorage | Smart Array Cluster Storage | 201724-B21 |
| Smart Array Cluster Storage Redundant Controller Option Kit |
218252-B21 | |
| 128-MB Cache Module for Smart Array 5302 Controller |
153506-B21 | |
| 256-MB Battery-Backed Cache Module |
254786-B21 | |
| 4-Port Shared Storage Module with Smart Array Multipath Software for Smart Array Cluster Storage | 292944-B21 | |
| NOTE: Please
see the Compaq Smart Array Cluster Storage QuickSpecs for additional information
including configuration steps and additional options needed for a complete solution
at: http://h18000.www1.hp.com/products/quickspecs/11050_na/11050_na.html | ||
| | ||
|
Cluster Options |
ProLiant Cluster HA/F500 Enhanced Kit for Enterprise Virtual Array v.2 | 254623-B22 |
| ProLiant Cluster HA/F500 Basic Kit for Enterprise Virtual Array (v.2) | 313047-B21 | |
| NOTE: For additional information
regarding the Compaq ProLiant Cluster HA/F500 for Enterprise Virtual Array please
see the following QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11055_na/11055_na.html | ||
| ProLiant Cluster HA/F500 Basic Kit for MA8000/EMA 16000 |
103250-B25 | |
| ProLiant Cluster HA/F500 Enhanced Kit for MA8000/EMA 16000 |
379937-B25 | |
| ProLiant Cluster HA/F500 Enhanced DT Kit for MA8000/EMA 16000 |
164227-B23 | |
| NOTE:
For additional information regarding the Compaq ProLiant Cluster for HA/F500
please see the following QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/10232_na/10232_na.html | ||
| ProLiant Cluster HA/F100 for MSA1000 v2 | 252408-B22 | |
| ProLiant Cluster HA/F200 for MSA1000 v2 | 252409-B22 | |
| NOTE: For additional information
regarding the Compaq ProLiant Cluster HA/F100 and HA/F200 for MSA1000, please
see the following QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11035_na/11035_na.html | ||
| | ||
|
MSA1000 |
MSA1000 | 201723-B22 |
| MSA1000 Controller |
218231-B22 | |
|
MSA Fibre Channel I/O Module |
218960-B21 | |
|
MSA1000 Fabric Switch |
218232-B21 | |
|
MSA1000 Fibre Channel Adapter (FCA) 2101 |
245299-B21 | |
|
HP StorageWorks msa hub 2/3 |
286763-B21 | |
| NOTE:
Please see the StorageWorks by Compaq Modular SAN Array 1000 QuickSpecs for
additional options and configuration information at: http://h18000.www1.hp.com/products/quickspecs/11033_na/11033_na.html | ||
| | ||
|
StorageWorks Modular Array 8000/Enterprise Modular Array 12000 | EMA12000 D14 60Hz | 175990-B21 |
| EMA12000 S14 60Hz |
175991-B21 | |
|
MA8000 60Hz | 175992-B21 | |
| EMA12000 Blue 60Hz |
175993-B21 | |
| NOTE: Options include controller, solution kits, ACS. MA8000/EMA12000 includes controller shelf, drive shelves and cabinet. Packaging upgrade to RA8000/ESA12000. | ||
| NOTE:
Please see the StorageWorks MA8000/EMA12000 QuickSpecs for FC Hubs, FC switches,
platform software, host adapters, disks and options for complete solutions at:
http://h18000.www1.hp.com/products/quickspecs/10545_na/10545_na.html | ||
| | ||
|
StorageWorks |
EMA16000 D14 60Hz (opal) |
238792-B21 |
|
EMA16000 S14 60Hz (opal) |
238791-B21 | |
| NOTE: Models include: Dual HSG80 controllers in each Model 2200 enclosure (2 pairs per single bus configuration, 4 pairs per dual bus configuration) with 1GB cache per controller pair, and 12 14-bay drive enclosures with redundant power supplies. Configure-to-Order (CTO) builds are available. Options include ACS, platform kits and software by HP. | ||
| NOTE: Please
see the StorageWorks EMA16000 QuickSpecs for FC switches, platform software, host
adapters, disks and options for complete solutions at: http://h18000.www1.hp.com/products/quickspecs/10812_na/10812_na.html | ||
| | ||
|
StorageWorks Options |
StorageWorks SAN Switch 2/8-EL |
322120-B21 |
|
StorageWorks SAN Switch 2/8-EL Upgrade |
325888-B21
|
|
|
StorageWorks SAN Switch 2/16 |
322118-B21
|
|
|
StorageWorks SAN Switch 2/16-EL Upgrade |
288250-B21
|
|
|
|
||
| UPS
and PDU Power Cord Matrix | Please
see the UPS and PDU cable matrix that lists cable descriptions, requirements,
and specifications for UPS and PDU units: ftp://ftp.compaq.com/pub/products/servers/ProLiantstorage/power-protection/powercordmatrix.pdf. |
| | |
|
Uninterruptible Power Systems – Rack Mountable |
Compaq UPS R1500 XR (1440VA, 1340 Watt), Low Voltage |
204404-001 |
|
Compaq UPS R3000 XR (2880VA, 2700 Watt), Low Voltage |
192186-001 |
|
|
Compaq UPS R3000 XR (3000VA, 2700 Watt), High Voltage |
192186-002 |
|
|
Rack-Mountable UPS R6000 (6000VA, 6000 Watt) High Voltage |
347207-001 |
|
| NOTE: The UPS R6000 has a hardwired input. | ||
| UPS R12000 XR N+x (200-240V) (hardwired) |
207552-B22
|
|
|
NOTE: The UPS R12000 XR has a hardwired input and output; requires a 100A circuit. |
|
|
|
|
||
|
UPS Options |
SNMP Serial Port Card |
192189-B21 |
| NOTE: Supports tower and rack UPS XR models ranging from 1000 – 3000VA. | ||
|
Six Port Card |
192185-B21 |
|
| NOTE: Supports tower and rack UPS XR models ranging from 1000 – 3000VA. | ||
|
High to Low Voltage Transformer (250VA) |
388643-B21 |
|
| NOTE: Supports R6000 UPS series only. 2.5 amps @ 125 Volts max output across two NEMA 5-15. | ||
|
Extended Runtime Module, T1000 XR |
218967-B21 |
|
| NOTE: 2U each, two ERM maximum. | ||
|
Extended Runtime Module, T1500 XR/T2200 XR |
218969-B21 |
|
| NOTE: 3U each, one ERM maximum. | ||
|
Extended Runtime Module, R1500 XR |
218971-B21 |
|
| NOTE: 2U each, two ERM maximum. | ||
|
Extended Runtime Module, R3000 XR |
192188-B21 |
|
| NOTE: 3U each, one ERM maximum. | ||
|
Extended Runtime Module, R6000 |
347224-B21 |
|
| NOTE: 3U each, two ERM maximum. | ||
|
Extended Runtime Module, R12000 XR, 4U |
217800-B21 |
|
| NOTE: 4U each, two ERM maximum. | ||
|
SNMP-EN Adapter |
347225-B21 |
|
| NOTE: Supports R6000 UPS series only. | ||
|
Multi-Server UPS Card |
123508-B21 |
|
| NOTE: Supports R6000 UPS series only. | ||
| Scalable UPS Card |
123509-B21
|
|
|
NOTE: Supports R6000 UPS series only. |
|
|
|
|
||
|
Modular PDUs 1U/0U | HP Modular Power Distribution Units (mPDU), Low Volt Model, 24A (100-127 VAC) |
252663-D71 |
| NOTE: This mPDU (252663-D71) may also be used to connect the low volt model of the UPS R3000 XR. | ||
| HP Modular Power Distribution Units (mPDU), High Volt Model, 24A (200-240 VAC) |
252663-D72 | |
|
HP Modular Power Distribution Units (mPDU), High Volt Model, 40A (200-240 VAC) |
252663-B21 | |
| NOTE: This mPDU (252663-B21), 40A model has a hardwired input. | ||
|
HP Modular Power Distribution Units (mPDU), High Volt Model, 16A (200-240 VAC) |
252663-B24 | |
| NOTE: This PDU has a detachable input power cord and allows for adaptability to country specific power requirements. This model may also be used with the high volt UPSs R3000 XR and R6000 For North America, need to order cable PN 340653-001. | ||
| NOTE:
Please see the following Modular Power Distribution Unit (Zero-U/1U Modular
PDUs) QuickSpecs for additional options including shorter jumper cables and country
specific power cords: http://h18000.www1.hp.com/products/quickspecs/11041_na/11041_na.html | ||
| | ||
|
PDU Options |
Third Party Modular PDU Mounting Kit |
310777-B21 |
| NOTE: This kit allows you to mount the Modular PDUs in racks other than the 9000/10000 Series racks (any racks using the standard 19" rail). For more details please refer the Modular PDU QuickSpecs. | ||
| 4.5' IEC C 13 to IEC C14 PDU Jumper Cable (1 per pack) |
142257-006
|
|
|
4.5' IEC C 13 to IEC C14 PDU Jumper Cable (15 per pack) |
142257-007 |
|
|
|
||
| Rack Builder | Please see the Rack Builder for configuration assistance at http://www8.compaq.com/RackBuilderOnline/pages/pg_main.html. |
| | |
|
HP Rack 10000 Series | HP Rack S10614 (14U) Rack Cabinet- Shock Pallet |
292302-B22 |
|
HP Rack 10842 (42U, 800mm wide) – Pallet |
257415-B21 | |
|
HP Rack 10842 (42U, 800mm wide) – Shock Pallet |
257415-B22 | |
|
HP Rack 10647 (47U) – Pallet |
245160-B21 | |
|
HP Rack 10647 (47U) – Crated |
245160-B23 | |
|
HP Rack 10642 (42U) – Pallet |
245161-B21 | |
|
HP Rack 10642 (42U) – Shock Pallet |
245161-B22 | |
|
HP Rack 10642 (42U) – Crated |
245161-B23 | |
|
HP Rack 10636 (36U) – Pallet |
245162-B21 | |
|
HP Rack 10636 (36U) – Shock Pallet |
245162-B22 | |
|
HP Rack 10636 (36U) – Crated |
245162-B23 | |
|
HP Rack 10622 (22U) – Pallet |
245163-B21 | |
|
HP Rack 10622 (22U) – Shock Pallet |
245163-B22 | |
|
HP Rack 10622 (22U) – Crated |
245163-B23 | |
|
HP Rack 10614 (14U) – Shock Pallet |
292303-B22 | |
|
NOTE: -B21 (pallet) used to ship empty racks
shipped on a truck |
| |
| NOTE: It is mandatory to use a shock pallet in order to ship racks with equipment installed. Not all Compaq equipment is qualified to be shipped in the Rack 10000 series |
| |
|
NOTE: Please see the Rack 10000 QuickSpecs
for Technical Specifications such as height, width, depth, weight, and color: |
| |
|
NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://h18000.www1.hp.com/products/servers/proliantstorage/racks/index.html. |
| |
|
| ||
|
Compaq Rack 9000 Series (opal) |
Compaq Rack 9122 (22U) – Pallet |
120665-B21 |
|
Compaq Rack 9122 (22U) – Shock Pallet |
120665-B22 | |
|
Compaq Rack 9122 (22U) – Crated |
120665-B23 | |
| NOTE:
–B21 (pallet) used to ship empty racks shipped on a truck –B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and Channels) –B23 (crated) used for air shipments of empty racks |
| |
| NOTE:
Please see the Rack 9000 QuickSpecs for Technical Specifications such as
height, width, depth, weight, and color: |
| |
|
NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://h18000.www1.hp.com/products/servers/proliantstorage/racks/index.html. |
| |
|
| ||
|
Rack Options for HP Rack 10000 Series |
Rack Blanking Panels – Graphite (Multi) |
253214-B26 |
| NOTE: Contains one each of 1U, 2U, 4U and 8U. | ||
|
Rack Blanking Panels – Graphite (1U) |
253214-B21 | |
| NOTE: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (1U). | ||
|
Rack Blanking Panels – Graphite (2U) |
253214-B22 | |
| NOTE: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (2U). | ||
|
Rack Blanking Panels – Graphite (3U) |
253214-B23 | |
| NOTE: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (3U). | ||
|
Rack Blanking Panels – Graphite (4U) |
253214-B24 | |
| NOTE: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (4U). | ||
|
Rack Blanking Panels – Graphite (5U) |
253214-B25 | |
| NOTE: The Rack Blanking Panels (PN 253214-B21) contains 10 each of (5U). | ||
|
800mm Wide Stabilizer Kit (Graphite) |
255488-B21 | |
| NOTE: Supported by the Rack 10842 cabinet only. | ||
|
600mm Stabilizer Kit – Graphite |
246107-B21 | |
|
Baying Kit for Rack 10000 series (Carbon) |
248929-B21 | |
|
42U Side Panel – Graphite Metallic |
246099-B21 | |
|
110V Fan Kit (Graphite) |
257413-B21 | |
| NOTE: Roof Mount Includes power cord with IEC320-C13 to Nema 5-15P. | ||
|
220V Fan Kit (Graphite) |
257414-B21 | |
| NOTE: Roof Mount Includes power cord with IEC320-C13 to Nema 6-15P. | ||
|
36U Side Panel – Graphite Metallic |
246102-B21 | |
|
47U Side Panel – Graphite Metallic |
255486-B21 | |
|
9000/10000 Series Offset Baying Kit (42U) |
248931-B21 | |
| NOTE: This kit can be used to connect 9000 and 10000 series racks of the same U height together. Kit contents include hardware for connecting racks and a panel to cover the 100mm gap at the rear of the two racks. | ||
|
NOTE: For additional information regarding Rack Options, please see the following URL: http://h18000.www1.hp.com/products/servers/proliantstorage/rack-options/index.html | ||
| | ||
|
Rack Options for |
Baying/Coupling Kit | 120669-B21 |
| 42U Side Panel |
120670-B21 | |
| NOTE: The 42U Side Panel (PN 120670-B21) supports the Compaq Rack 9142 and Compaq Rack 9842. | ||
| 36U Side Panel |
120671-B21 | |
| NOTE: The 36U Side Panel (PN 120671-B21) supports the Compaq Rack 9136. | ||
|
110V Fan Kit (Graphite) |
257413-B21 | |
| NOTE: Roof Mount Includes power cord with IEC320-C13 to Nema 5-15P. | ||
|
220V Fan Kit (Graphite) |
257414-B21 | |
| NOTE: Roof Mount Includes power cord with IEC320-C13 to Nema 6-15P. | ||
|
600mm Stabilizer Option Kit |
120673-B21 | |
|
800mm Stabilizer Option Kit (Opal) |
234493-B21 | |
| NOTE: The 800mm Stabilizer Kit (PN 234493-B21) supports the Rack 9842 only. | ||
|
9142 Extension Kit | 120679-B21 | |
| NOTE: The 9142 Extension Kit (PN 120679-B21) supports the Compaq Rack 9142 only. | ||
|
9142Split Rear Door (Opal) |
254045-B21 | |
| NOTE: The 9142 Split Rear Door (PN 254045-B21) supports the 600 mm wide, 42U 9000 series rack. | ||
| 9136 Extension Kit |
218216-B21 | |
|
9142 Short Rear Door | 218217-B21 | |
| NOTE: The 9142 Short Rear Door (PN 218217-B21) supports the Compaq Rack 9142 only. | ||
|
9136 Short Rear Door | 218218-B21 | |
| Rack Blanking Panel (Multi) |
169940-B21 | |
| NOTE: Kit includes four panels in 1U, 2U, 4U, and 8U. | ||
|
Rack Blanking Panels (1U) |
189453-B21 | |
| NOTE: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (1U). | ||
|
Rack Blanking Panels (2U) |
189453-B22 | |
| NOTE: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (2U). | ||
|
Rack Blanking Panels (3U) |
189453-B23 | |
| NOTE: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (3U). | ||
|
Rack Blanking Panels (4U) |
189453-B24 | |
| NOTE: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (4U). | ||
|
Rack Blanking Panels (5U) |
189453-B25 | |
| NOTE: The Rack Blanking Panels (PN 189453-B21) contains 10 each of (5U). | ||
|
9000/10000 Series Offset Baying Kit (42U) |
248931-B21 | |
| NOTE: This kit can be used to connect 9000 and 10000 series racks of the same U height together. Kit contents include hardware for connecting racks and a panel to cover the 100mm gap at the rear of the two racks. | ||
|
NOTE: For additional information regarding Rack Options, please see the following URL: http://h18000.www1.hp.com/products/servers/proliantstorage/rack-options/index.html. | ||
| | ||
|
Rack Options for |
High Air Flow Rack Door Insert for the 7122 Rack |
157847-B21 |
|
High Air Flow Rack Door Insert for the 7142 Rack (single) |
327281-B21 | |
|
High Air Flow Rack Door Insert for the 7142 Rack (6-pack) |
327281-B22 | |
|
Compaq Networking Cable Management Kit |
292407-B21 | |
|
Compaq Rack Extension Kit for 7142 |
154392-B21 | |
|
NOTE: For additional information regarding Rack Options, please see the following URL: http://h18000.www1.hp.com/products/servers/proliantstorage/rack-options/index.html. | ||
| | ||
|
Rack Options for Rack 7000, 9000 and 10000 Series |
Monitor Utility Shelf- opal |
303606-B21 |
|
Ballast Option Kit | 120672-B21 | |
| Rack Rail Adapter Kit (25" depth) | 120675-B21 | |
| 100 kg Sliding Shelf |
234672-B21 | |
|
Monitor/Utility Shelf - Graphite |
253449-B21 | |
|
Depth Adjustable Fixed Rail |
332558-B21 | |
|
Cable Management D-Rings Kit |
168233-B21 | |
|
Console Management Controller (CMC) Option Kit |
203039-B21 | |
|
Console Management Controller (CMC) Sensors Option Kit |
203039-B22 | |
|
Console Management Controller (CMC) Locking Option Kit |
203039-B23 | |
|
Console Management Controller (CMC) Smoke Sensors Option Kit |
203039-B24 | |
|
Server Console Switch 1 x 2 port (100-230 VAC) |
120206-001 | |
|
Server Console Switch 1 x 4 port (100-230 VAC) |
400336-001 | |
|
Server Console Switch 1 x 8 port (100-230 VAC) |
400337-001 | |
|
Server Console Switch 2 x 8 port (100-230 VAC) |
400338-001 | |
|
Server Console Switch 2 x 8 port (48VDC) |
400542-B21 | |
|
IP Console Switch Box, 1x1x16 |
262585-B21 | |
|
IP Console Switch Box, 3x1x16 |
262586-B21 | |
|
IP Console Interface Adapter, 8 pack |
262587-B21 | |
|
IP Console Interface Adapter, 1 pack |
262588-B21 | |
|
IP Console Expansion Module |
262589-B21 | |
|
KVM 9 PIN Adapter (4 Pack) |
149361-B21 | |
|
CPU to Server Console Cable, 12’ |
110936-B21 | |
|
CPU to Server Console Cable, 20’ |
110936-B22 | |
|
CPU to Server Console Cable, 40’ |
110936-B23 | |
|
CPU to Server Console Cable, 3’ |
110936-B24 | |
|
CPU to Server Console Cable, 7’ |
110936-B25 | |
|
IP CAT5 Cable 3’, 4 pack |
263474-B21 | |
|
IP CAT5 Cable 6’, 8 pack |
263474-B22 | |
|
IP CAT5 Cable 12’, 8 pack |
263474-B23 | |
|
IP CAT5 Cable 20’, 4 pack |
263474-B24 | |
|
IP CAT5 Cable 40’, 1 pack |
263474-B25 | |
|
Switch Box Connector Kit (115V) |
144007-001 | |
|
Switch Box Connector Kit (230V) |
144007-002 | |
|
Switch Box Connector Kit (high voltage) |
144007-B33 | |
|
1U Rack Keyboard & Drawer (Carbon) |
257054-001 | |
| NOTE: The 1U Rack Keyboard & Drawer (PN 257054-001). | ||
| TFT5600 Rack Keyboard Monitor | 221546-001 | |
| Input Device Adjustable Rails |
287139-B21 | |
| NOTE: Input Device Adjustable Rails (287139-B21) are for use with the TFT5110R, TFT5600RKM and integrated keyboard/drawer which is used in mounting into third party racks. | ||
| Input Device Telco Rail |
287138-B21 | |
| NOTE: Input Device Adjustable Rails (287138-B21) are for use ONLY with the TFT5110R, TFT5600RKM and integrated keyboard/drawer which is used in mounting into third party racks. | ||
| Keyboard/Monitor/Mouse extension cables | 169989-001 | |
| NOTE: For additional information regarding Rack Options, please see the following URL: http://h18000.www1.hp.com/products/servers/proliantstorage/rack-options/index.html. | ||
| | ||
| Service and Support Offerings (HP Care Pack Services) |
| |||||||||||||||||
| ||||||||||||||||||
| ||||||||||||||||||
| ||||||||||||||||||
| ||||||||||||||||||
| ||||||||||||||||||
| ||||||||||||||||||
| | ||||||||||||||||||
|
Data Center Services |
NOTE: These Data Center Services and Support Offerings are for the Enterprise Support Plan. Installation and Startup and Update Subscription are highly recommended for the Data Center Solutions Program. | |
|
Data Center | ||
|
Data Center Enterprise Support Plan for Single Server 7 x 24 2-hour H/W, 7 x 24 1-hour O/S (NT) One Year (6-3 Part Number for U.S.) |
224371-002 | |
| Data Center Enterprise Support Plan for 2 Node Cluster 7 x 24 2-hour H/W, 7 x 24 1-hour O/S (NT) One Year (6-3 Part Number for U.S.) | 224372-002 | |
| Data Center Enterprise Support Plan for 4 Node Cluster 7 x 24 2-hour H/W, 7 x 24 1-hour O/S (NT) One Year (6-3 Part Number for U.S.) | 224373-002 | |
| Data Center Enterprise Support
Plan for Single Server 7 x 24 4-hour H/W, 7 x 24 1-hour O/S (NT) One Year (6-3 Part Number for U.S.) | 224376-002 | |
| Data Center Enterprise Support Plan for 2 Node Cluster 7 x 24 4-hour H/W, 7 x 24 1-hour O/S (NT) One Year (6-3 Part Number for U.S.) | 224377-002 | |
| Data Center Enterprise Support Plan for 4 Node Cluster 7 x 24 4-hour H/W, 7 x 24 1-hour O/S (NT) One Year (6-3 Part Number for U.S.) | 224378-002 | |
| Data Center Solution Installation & Start-up Services (for servers) | ||
| Windows 2000 Datacenter Installation and Startup Service Package for Single Server (6-3 Part Number for U.S.) |
224737-002 | |
| Windows 2000 Datacenter Installation and Startup Service Package for 2 Node Cluster (6-3 Part Number for U.S.) | 224738-002 | |
| Windows 2000 Datacenter Installation and Startup Service Package for 4 Node Cluster (6-3 Part Number for U.S.) |
224739-002 | |
| Data Center Software Support Only Options for Systems Integrators | ||
| Data Center Gold Support Plan for 50 Incidents (One-year) (6-3 Part Number for U.S.) |
224381-002 | |
| Availability Assessment | ||
| Availability Assessment Service for Windows 2000 Datacenter (2-5-2 Part Number for U.S.) |
QR-SMAAT-BA | |
| Windows 2000 Data Center Subscription Service for OS Service Packs and Updates (One Year Subscription) | ||
| NOTE: Required for each server. | ||
| Windows 2000 Data Center 1-8 Processors Software Updates (One-year) (6-3 Part Number for U.S.) | 224740-002 | |
| NOTE: For more information, customer/resellers can contact http://www.hp.com/hps/. |
|
|
Memory
| Compaq ProLiant DL760 700 MHz-1MB Model 2-1024 |
| Standard Memory 1024-MB buffered SDRAM DIMM memory (two kits of 2 x 256-MB DIMMs) Standard Memory Plus Optional Memory Up to 13,312-MB of SDRAM DIMM memory is available with the installation of optional SDRAM DIMM memory expansion kits. Standard Memory Replaced with Optional Memory Up to 16,384-MB of SDRAM DIMM memory is available with the removal of standard memory and the installation of optional SDRAM DIMM memory expansion kits. NOTE: 16 slots with 2 per bank. Up to 16-GB memory total. Memory must be added in banks of two DIMMs. Charts do not represent all possible configurations. |
|
Memory |
Slot |
||||||||
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
||
|
Standard |
1024 MB |
256 MB |
256 MB |
256 MB |
256 MB |
empty |
empty |
empty |
empty |
|
Optional |
13,312 MB |
256 MB |
256 MB |
256 MB |
256 MB |
1024 MB |
1024 MB |
1024 MB |
1024 MB |
| Maximum | 16,384 MB |
1024 MB |
1024 MB |
1024 MB |
1024 MB |
1024 MB |
1024 MB |
1024 MB |
1024 MB |
| 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | ||
| Standard | 1024 MB | empty | empty | empty | empty | empty | empty | empty | empty |
| Optional | 13,312 MB | 1024 MB | 1024 MB | 1024 MB | 1024 MB | 1024 MB | 1024 MB | 1024 MB | 1024 MB |
| Maximum | 16,384 MB | 1024 MB | 1024 MB | 1024 MB | 1024 MB | 1024 MB | 1024 MB | 1024 MB | 1024 MB |
|
Following are memory options available from Compaq: |
|
|
328809-B21 |
|
328808-B21 |
|
328807-B21 |
|
328806-B21 |
| Compaq ProLiant DL760 900 MHz-2MB Model 4 2048 & 700 MHz-2MB Model 4-2048 |
| Standard Memory
2048-MB buffered SDRAM DIMM memory (two kits of 2 x 512-MB DIMMs) Standard Memory Plus Optional Memory Up to 14,336-MB of SDRAM DIMM memory is available with the installation of optional SDRAM DIMM memory expansion kits. Standard Memory Replaced with Optional Memory Up to 16,384-MB of SDRAM DIMM memory is available with the removal of standard memory and the installation of optional SDRAM DIMM memory expansion kits. NOTE: 16 slots with 2 per bank. Up to 16-GB memory total. Memory must be added in banks of two DIMMs. Charts do not represent all possible configurations. |
|
Memory |
Slot |
||||||||
|
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
||
|
Standard |
2048 MB |
512 MB |
512 MB |
512 MB |
512 MB |
empty |
empty |
empty |
empty |
|
Optional |
14,336 MB |
512 MB |
512 MB |
512 MB |
512 MB |
1024 MB |
1024 MB |
1024 MB |
1024 MB |
| Maximum | 16,384 MB |
1024 MB |
1024 MB |
1024 MB |
1024 MB |
1024 MB |
1024 MB |
1024 MB |
1024 MB |
| 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | ||
| Standard | 2048 MB | empty | empty | empty | empty | empty | empty | empty | empty |
| Optional | 14,336 MB | 1024 MB | 1024 MB | 1024 MB | 1024 MB | 1024 MB | 1024 MB | 1024 MB | 1024 MB |
| Maximum | 16,384 MB | 1024 MB | 1024 MB | 1024 MB | 1024 MB | 1024 MB | 1024 MB | 1024 MB | 1024 MB |
|
Following are memory options available from Compaq: |
|
|
328809-B21 |
|
328808-B21 |
|
328807-B21 |
|
328806-B21 |
|
|
Storage
|
|
0 - 3 |
1" Ultra2/Ultra3 Hot Plug drive bays |
|
A |
Integrated 1.44MB Floppy drive |
|
|
B |
Integrated 24x IDE CD-ROM (Low-Profile) |
|
|
Drive Support |
||||
|
|
||||
|
Quantity |
Position |
|
||
|
Integrated Media |
||||
|
Integrated 1.44-MB Diskette Drive |
Up to 1 |
A |
Integrated |
|
|
Integrated 24x IDE |
Up to 1 |
B |
Integrated IDE |
|
|
|
||||
|
Hard Drives |
||||
| Ultra320 Hot Pluggable Drives | ||||
|
Quantity |
Position |
|
||
|
1-inch |
Up to 4 |
0-3 |
|
|
| 146.8-GB 10,000 rpm 72.8-GB 10,000 rpm 36.4-GB 10,000 rpm 72.8-GB 15,000 rpm 36.4-GB 15,000 rpm 18.2-GB 15,000 rpm |
|
|
Integrated Smart Array Controller |
|
| NOTE: All U320 Universal Hard Drives are backward compatible to U2 or U3 speeds. U320 drives require an optional U320 Smart Array Controller or U320 SCSI HBA to support U320 transfer rates. | ||||
|
|
||||
|
External Storage | ||||
| Quantity |
Position |
| ||
| StorageWorks Enclosure 4300
Family |
Up to 44 | External |
Smart Array 532 Controller | |
| MSA 1000 |
Please see the MSA 1000 QuickSpecs below to determine configuration requirements |
External | Please see the MSA 1000 QuickSpecs (URL below) for the latest list of supported HBA’s | |
| MSA 1000: http://h18000.www1.hp.com/products/quickspecs/11033_na/11033_na.html | ||||
| | ||||
|
Maximum Storage Capacity – (StorageWorks Enclosure SCSI Attached) |
||
|
Internal |
587.2 GB (4 x 146.8-GB Ultra320 1˛ Drives) |
|
| External | 90.428 TB hot plug SCSI storage (44 x (14 x 146.8-GB Ultra320 1˛ Drives)) | |
| Total |
91.016 TB |
|
|
|
||
| Tape Drives | ||||
| NOTE:
For an up-to-date listing of the latest O/S Support details for each of the
Tape Drives listed below, please see the following: NOTE:
For an up-to-date listing of the latest O/S Support details for each of the
Tape Storage Systems listed below, please see the following: | ||||
|
Quantity |
Position |
| ||
|
AIT 100-GB External |
Up to 1 | External |
Integrated Smart Array Controller | |
|
External 40/80-GB DLT Enhanced |
Up to 3 per controller |
External | Integrated
Smart Array Controller | |
|
HP StorageWorks AIT 35 GB Autoloader |
Up to 1 (for a single HBA) |
External | 64-bit/66-MHz
Dual Channel Wide Ultra3 SCSI Adapter | |
|
SDLT 110/220-GB, External |
Up to 2 | External |
64-bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter | |
|
SSL2020 AIT Library | 2
drives per |
External | 64-Bit/66-MHz
Dual Channel Wide Ultra3 SCSI Adapter | |
|
MSL5026DLX |
2 drives per |
External | 64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter | |
|
20/40-GB DAT 8 Cassette Autoloader External |
Up to 1 | External |
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter | |
|
DLT1 1280 SuperLoader |
Up to 2 | External |
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter | |
|
|
TechSpecs
| System Unit | Dimensions (HxWxD) | 12.14 x 17.5 x 27 in (30.83 x 44.45 x 68.58 cm) | |
| Weight | 165 lb (75 kg) | ||
| No hard drives installed,
two power supplies | |||
| Input Requirements (per power supply) | Rated Input Voltage | 100 to 120 VAC/200 to 240 VAC (lowline/highline) | |
| Rated Input Frequency | 47 to 63 Hz (lowline/highline) | ||
| Input Power | 740W/1700W (lowlinehighline) | ||
| Rated Input Current | 8A at 100 VAC/10A at 200 VAC (lowlinehighline) | ||
|
BTU Rating (Maximum output) (NOTE that the maximum heat output by the server is equal to the electrical power input.) |
1555 Watts [5309 BTU/hr] (System is configured to draw maximum power) | ||
| SCSI Connector | One VHDCI connector for tape support only | ||
| Power Supply Output Power (per power supply) | Rated Steady-State Power | 500W/1150W (lowlinehighline) | |
| Maximum Peak Power | 540W/1150W (lowlinehighline) | ||
| Temperature Range | Operating | 50° to 95° F at sea level, altitude de-rating of 1.8° F per 1,000 ft to 10,000 ft (10° to 35° C at sea level, altitude de-rating of 1° C per 300 m to 3,000 m). Maximum rate of change is 18° F/Hr (10° C/Hr) | |
| Non-operating | 22° to 140 ° F ( -30° to 60° C). Maximum rate of change is 36° F/Hr (20° C/Hr) | ||
|
Relative Humidity (non-condensing) | Operating | 10 to 90% relative humidity, 82.4° F (28° C) maximum wet bulb temperature, non-condensing | |
| Non-operating | 5 to 95% relative humidity, 101.7° F (38.7° C) maximum wet bulb temperature, non-condensing | ||
| Maximum Wet Bulb Temperature | 101.7° F (38.7° C) | ||
| Acoustic Noise | Idle (Fixed Disk Drives Spinning) | ||
L WAd (BELS) | 7.0 | ||
L pAm (dBA) | 54 | ||
|
Operating (Random Seeks to Fixed Disks) | |||
L WAd (BELS) | 7.0 | ||
L pAm (dBA) | 54 | ||
| | |||
| Power Supply | 1150/500W, Hot Plug Redundant (2 standard) |
One Redundant Power Supply (optimized to provide full redundancy at 220 volts) | |
| Input Specifications | Normal Line Voltage | 100 to 120 VAC/200 to 240 VAC | |
| Range Input Line | 90 to 132 VAC/180 to 265 VAC | ||
| Frequency Range | 47 to 63 Hz | ||
| Power Factor | 0.95 | ||
| Input Current | 8 A at 100 VAC/10 A at 200 VAC | ||
| Inrush Current | < 70 A at 132 VAC (cold start) | ||
| Holdup Time | 20 ms from zero crossing at 120 VAC | ||
| General Specifications | Full Output Rating | To
104° F (40° C) and 5,000 ft (1524 m) | |
|
To 89.6° F (32° C) and 10,000 ft (3,048 m) (derate linearly) | |||
| Minimum Load | 1 A on
5 V output; 1 A on 12 V output; 0.5 A on 3.3 V output | ||
| Ambient Temperature Range | Operating | 50° to 104° F (10° to 40° C) | |
| Storage | -40° to 149° F (-40° to 65° C) | ||
| Dielectric Voltage Withstand | Input to Output | 3,000 VAC/min | |
| Input to Ground | 1,500 VAC/min | ||
| Input Transient Susceptibility | Common and Differential Mode (superimposed on AC line) | 2,500 V, 1µs, damped sinusold 600 V, 10 µs pulse | |
| Differential Mode | 20% step change in AC input voltage | ||
|
| |||
| 1.44-MB Diskette Drive | Size | 3.5 in | |
|
LED Indicators (front panel) | Green | ||
|
Read/Write Capacity per Diskette (high/low density) | 1.44 MB/720 KB | ||
| Drive Supported | One | ||
| Drive Height | 11 mm | ||
| Drive Rotation | 300 rpm | ||
| Transfer Rate Synchronous (Maximum) (high/low) | 500 K/250 K bits/s | ||
| Bytes/Sector | 512 | ||
| Sectors/Track (high/low) | 18/9 | ||
| Tracks/Side (high/low) | 80/80 | ||
| Access Times | Track-to-Track (high/low) | 3/6 ms | |
| Average (high/low) | 174/94 ms | ||
| Settling Time | 15 ms | ||
| Latency Average | 83/100 ms | ||
| Cylinders (high/low) | 80/80 | ||
| Read/Write Heads | Two | ||
| | |||
|
Low-Profile 24X Max IDE CD-ROM Drive | Disk | Applicable Disk | CD-DA, CD-ROM (Mode 1 and 2) |
| CD-XA, CD-I (Mode 2, Form 1 and 2) | |||
| CD-I Ready, CD Extra, Video CD, CD-Bridge | |||
| Photo CD (Single and Multi-session) | |||
| CD-WO | |||
| Capacity | 550 MB (Mode 1, 12 cm) | ||
| 640 MB (Mode 2, 12 cm) | |||
| Diameter | 4.7 x 3.15 in/12 x 8 cm | ||
| Rotational Speed | 4200 rpm maximum | ||
| Center Hole | 0.6 in/15 mm diameter | ||
| Thickness | 1.2 mm | ||
| Track Pitch | 1.6 µm | ||
| Block Size | Mode 0 | 2,368, 2,352 bytes | |
| Mode 1 | 2,352, 2,340, 2,336, 2,048 bytes | ||
| Mode 2 | 2,352, 2,340, 2,336, 2,048 bytes | ||
| Interface | IDE (ATAPI) | ||
| Access Times (typical) | Random | < 140 ms | |
| Full-Stroke | < 300 ms | ||
| Data Transfer Rate | Sustained | 150 KB/s (sustained 1X) | |
| Burst | 2100 to 4800 KB/s | ||
| Cache Buffer | 128 KB | ||
| Start-up Time (typical) | < 10 seconds | ||
| Stop Time | < 5 seconds | ||
| Operating Conditions | Temperature | 41° to 120° F (5° to 55° C) | |
| Humidity | 10% to 80% | ||
| Dimensions |
( HxWxD, maximum) | 0.5 x 5.16 x 5.12 in (1.27 x 13.1 x 13 cm) | |
| Weight | < 0.75 lb (< 340 g) | ||
|
| |||
| Integrated Smart Array Controller | Data Compatible with all Smart Array Controllers | Yes |
| Instant Upgrades to other Smart Array Controllers | Yes | |
| Consistent Software Manageability Tools | Yes | |
| PCI Bus | 32-bit, 33 MHz (integrated on peripheral board) | |
| PCI Peak Data Transfer Rate | 133 MB/s | |
| SCSI Protocols Supported | Ultra2, Wide-Ultra | |
| SCSI Peak Data Transfer Rate | 80 MB/s | |
| Channels | 2 | |
| 1/1 | ||
|
Drives Supported (Maximum) |
Maximum = total number of drives | |
| NOTE: Maximum is the total number of internal drives on each specific ProLiant server. | ||
| Cache | 8-MB read only | |
| RAID Support | 0, 1, 1+ 0, 5 | |
| Logical Drives (external/internal) | 32 | |
| Online Configuration | Yes | |
| Online Capacity Expansion | Yes | |
| Logical Drive Capacity Extension | Yes | |
| Online Stripe Size Migration | Yes | |
| Online RAID Level Migration | Yes | |
| Online Spare Support | Yes | |
| Automatic Data Recovery | Yes | |
| Drive Roaming | Yes | |
| Redundant Controllers | No | |
|
|
||
| NC3134 Fast Ethernet NIC 64 PCI Dual Port 10/100 | Network Interface | 10Base-T/100Base-TX | |
| Compatibility | IEEE 802.3/802.3u compliant | ||
| Data Transfer Method | 64-bit/66-MHz bus-master PCI, compatible with 64/33, 32/66, and 32/33 | ||
| Network Transfer Rate | 10Base-T (Half-Duplex), 10Base-2 | 10 Mb/s | |
| 10Base-T (Full-Duplex) | 20 Mb/s | ||
| 100Base-TX (Half-Duplex) | 100 Mb/s | ||
| 100Base-TX (Full-Duplex) | 200 Mb/s | ||
| Connector | RJ-45 | ||
| I/O Address and Interrupt | Automatic Configuration | ||
| Cable Support | 10Base-T |
Categories 3, 4 or 5 UTP (2 or 4 pair); up to 328 ft (100 m) | |
| 100Base-TX | Category 5 UTP (2 pair); up to 328 ft (100 m) | ||
| OS Driver Support | Microsoft Windows 2000 and NT 4.x | ||
| Novell NetWare 4.x and 5.x | |||
| Linux | |||
| SCO OpenServer 5.x | |||
| SCO UnixWare 7.x | |||
| OS/2 Warp Server | |||
| Solaris v.8 | |||
| | |||
|
© Copyright 2003 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel Corporation. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. |
