Compaq AlphaStation DS10 (600 MHz) - World Wide QuickSpecs

Overview

Compaq AlphaServer DS10
Compaq AlphaStation DS10

1.
Diskette drive

2.
Fan

3.
PCI riser card

4.
Memory boards

5.
Dual Ethernet ports

6.
Keyboard and mouse ports

7.
CPU and fan

8.
Power supply

9.
Disks

10.
CD-ROM drive

11.
Front Access Storage Cage

12.
Internal Storage Cage

MR0050

MR0049

At A Glance

AlphaServer/AlphaStation DS10 3U Systems include:

Alpha 600-MHz CPU with 2-MB onboard ECC cache
512-MB or 1-GB SDRAM memory - expandable to 2-GB maximum memory capacity
Onboard dual 10/100 BaseT Ethernet ports
Four PCI expansion slots - three 64-bit PCI slots and one 32-bit PCI slot
Onboard dual IDE controller
1.44-MB diskette drive
600-MB CD-ROM drive
Two storage cage subsystems: Internal Storage Cage for IDE/SCSI tapes/drives; Front Access Storage Cage for SCSI drives
DS10 Internal Storage Cage Systems can be configured with: three internal 3.5-inch x 1-inch hard disk drives or two internal 3.5-inch x 1-inch hard disk drives and one 5.25-inch x 1.6-inch removable media device
DS10 Front Access Storage Cage Systems can be configured with: two front access 3.5-inch x 1-inch hard disk drives and two internal 3.5-inch x 1-inch hard disk drives) or one Front Access Universal tape drive (DAT) and two internal disk drives
Maximum Internal storage capacity: Internal Storage Cage 218-GB SCSI or 120-GB IDE; Front Access Storage Cage-437-GB SCSI
Two serial ports: COM1 port is both an RMC port with modem control and a full-duplex asynchronous communications port; COM2 port is a full-duplex asynchronous communications port
Bi-directional enhanced parallel port
PS/2-style keyboard port and mouse port
300W (88-260V, 47-63Hz) power supply
U.S. English documentation
Tru64 UNIX or OpenVMS Factory Installed Software
90-day software product warranty
Protected by HP Services, including three-year, on-site hardware with next business day response

Standard Features

Processor	Alpha 21264A 600-MHz processor

Cache Memory	2-MB onboard cache

Upgradability	Supports upgrades of memory and hard drives
	Standard	One CPU

Memory	Standard	512 MB or 1 GB (one memory kit)
	Maximum	2 GB (two memory kits, kits include two industry-standard DIMMs with ECC support)

Network Controller	Onboard dual 10/100 BaseT Ethernet ports

Expansion	Storage bays	Internal Storage Cage Systems: Five total - CD-ROM, FDD, and three storage bays: Three internal 3.5-inch x 1-inch hard disk drives or two internal 3.5-inch x 1-inch hard disk drives and one 5.25-inch x 1.6-inch removable media device
		Front Access Storage Cage Systems: Six Total - CD-ROM, FDD, and Four Storage bays (two front access 3.5-inch x 1-inch hard disk drives and two internal 3.5-inch x 1-inch hard disk drives)
	PCI slots	Four full-length slots (three 64-bit, one 32-bit)

Storage	Diskette Drive	1.44-MB diskette drive
	CD-ROM	Internal Storage Cage Systems: 5.25-inch half height 48X CD-ROM drive Front Access Storage Cage Systems 24X slim-line CD-ROM drive
	Hard Drives	40-GB and 80-GB IDE disk drives or 36.4-GB and 72.8-GB Wide Ultra3 available with the Internal Storage Cage, and 18.2-GB, 36.4-GB, 72.8-GB, or 146-GB Universal SCSI drives available with Front Access Storage Cage. SCSI disk drives require optional SCSI adapter. IDE drives not supported in Front Access Cage systems.

Storage Adapter/ Controller	Onboard IDE controller for internal storage, choice of optional storage adapters/controllers

Expansion Ports	Parallel	One bi-directional enhanced port
	Serial	Two ports, one serial port with full-duplex asynchronous modem control and one RMS dedicated serial port with full-duplex asynchronous modem control
	Keyboard	One PS/2-style port
	Mouse	One port

Power Supply	300W (88-260V, 47-63 Hz)

Manageability	Insight Manager

Supported Options	A detailed summary of options supported on the AlphaServer/AlphaStation DS10 is available at http://www.compaq.com/alphaserver/options/asds10/asds10_options.html

OS Support	AlphaServer DS10 Tru64 UNIX systems include pre-installed software (V5.1B PK3/NHD7), Base license, Unlimited User license, Server Extension license, Internet Express and Secure Web Server
	AlphaStation DS10 Tru64 UNIX systems include pre-installed software (V5.1B PK3/NHD7), 2-user Base license
	AlphaServer DS10 OpenVMS systems include pre-installed software (V7.3-2), Base license with System Manager license and Enterprise Integration Server License Package for OpenVMS V3.0A.
	AlphaStation DS10 OpenVMS systems include pre-installed software (V7.3-2), Base license, Concurrent Use 1-user license, and NAS 150 Client license
	Minimum OS support: Tru64 UNIX V4.0F or OpenVMS V7.1 -2

Service and Support	Protected by HP Services, including a three-year, on-site hardware warranty with next business day response. Software warranty is a 90-day telephone advisory. Training, consulting, network integration, software support, comprehensive system maintenance and guaranteed uptime services are also available for customers requiring higher levels of service and support.

Systems

Step 1 – Select system

AlphaServer/AlphaStation DS10 600-MHz systems require the mandatory selection of the following items:

One Storage Cage (either Internal Storage Cage or Front Access Storage Cage) and one system disk

If Internal Storage Cage is selected:

Mandatory selection of one IDE or one internal SCSI system disk drive
Mandatory selection of SCSI adapter and SCSI cable kit required for internal SCSI disks and tape

If Front Access Storage Cage is selected:

Mandatory selection of one Universal SCSI system disk drive
Mandatory selection of SCSI adapter is required for Front Access Storage Cage (cable is included)
Front Access Storage Cage based system is SCSI only. (IDE drives cannot be used.)
Country-specific power cord
Software media and documentation for first system on site
Rackmount kit for rackmount systems (See Step 5 – M-Series Cabinet Enclosures)
Minimum OS support: Tru64 UNIX V4.0F or OpenVMS V7.1-2

NOTE: Country-specific keyboard and mouse are recommended. See Step 11.

AlphaServer DS10 600-MHz Base Systems
OS	CPU	Memory	PCI	2-10/100t Ports	Hard Drive	Storage Cage	Order Number
Tru64 UNIX	600 MHz	512 MB	4	Onboard	Mandatory	Mandatory	DA-74BAA-EA
Tru64 UNIX	600 MHz	1 GB	4	Onboard	Mandatory	Mandatory	DA-74BAA-FA

OpenVMS	600 MHz	512 MB	4	Onboard	Mandatory	Mandatory	DY-74BAA-EA
OpenVMS	600 MHz	1 GB	4	Onboard	Mandatory	Mandatory	DY-74BAA-FA

Linux-Ready	600 MHz	512 MB	4	Onboard	Mandatory	Mandatory	DJ-74BAA-EA
Linux-Ready	600 MHz	1 GB	4	Onboard	Mandatory	Mandatory	DJ-74BAA-FA

AlphaStation DS10 600-MHz Base Systems
OS	CPU	Memory	PCI	2-10/100t Ports	Hard Drive	Storage Cage	Order Number
Tru64 UNIX	600 MHz	512 MB	4	Onboard	Mandatory	Mandatory	DA-74BAA-EW
Tru64 UNIX	600 MHz	1 GB	4	Onboard	Mandatory	Mandatory	DA-74BAA-FW

OpenVMS	600 MHz	512 MB	4	Onboard	Mandatory	Mandatory	DY-74BAA-EW
OpenVMS	600 MHz	1 GB	4	Onboard	Mandatory	Mandatory	DY-74BAA-FW

Linux-Ready	600 MHz	512 MB	4	Onboard	Mandatory	Mandatory	DJ-74BAA-EW
Linux-Ready	600 MHz	1 GB	4	Onboard	Mandatory	Mandatory	DJ-74BAA-FW

Step 2 – Select Mandatory Options (Storage Cage, System Disk, SCSI Controller, Power Cord)

MR0051

Step 2a – Mandatory Selection of Storage Cage

DS10 Systems support one Storage Cage Selection of one Storage Cage is mandatory (no exceptions) DS10 Internal Storage Cage: DS10 System with Internal Cage supports three storage devices: - Either three internal hard disk drives or one 5.25-inch half height backup tape and two internal hard disk drives DS10 Front Access Storage Cage: DS10 System with Front Access Cage supports up to four storage devices: - Two Universal disk drives plus two internal disk drives, or - One Front Access Universal Tape Drive (DAT) and two internal disk drives	3X-BA10A-AA 3X-BA10B-AA

Step 2b – Internal Storage Cage - System Disk Drive - Mandatory

Selection of one system disk drive is mandatory for the Internal Storage Cage (3X-BA10A-AA)
- Mandatory selection of one IDE or one internal SCSI system disk drive
- Mandatory selection of SCSI adapter and SCSI cable kit required for internal SCSI disks and tape

1.	Floppy Disk Drive
2.	Internal Drive Bay
3.	CD-ROM
4.	Internal Drive/Tape Bay
5.	Internal Drive Bay

MR0052

DS10 Storage Configuration Rules with Selection of Internal Storage Cage:

DS10 Systems configured with the Internal Storage Cage include a 600-MB 48X half height CD-ROM and 1.44-MB diskette in dedicated drive slots
DS10 Systems configured with the Internal Storage Cage include three internal storage bays (two in the Storage cage plus one in the system box) that can be configured as follows:
- Maximum of three internal disk drives (3.5-inch x 1-inch drives) or two internal disk drives
  (3.5-inch x 1-inch) and one 5.25-inch half height removable media device
Mandatory selection of SCSI adapter and SCSI cable kit is required for internal SCSI disks or tapes
IDE Disk drive cable kits are included with the system

NOTE: When a tape drive is ordered, it will be installed in the top slot (Slot 3) and the CD will be installed in
Slot 4.

Internal IDE Disk Drives	20 GB 7,200 rpm IDE (UDMA) drive	3X-RE58A-AA
	40-GB 7,200 rpm IDE (UDMA) disk drive	3X-RE58A-BA
	NOTE: Requires minimum console firmware V5.9-6 or higher. Updates available at http://ftp.digital.com/pub/Digital/Alpha/firmware 80-GB 7,200 rpm IDE (UDMA) disk drive	3X-RE58A-CA
	NOTE: Requires minimum console firmware V6.0 or higher. Updates available at http://ftp.digital.com/pub/Digital/Alpha/firmware

Internal SCSI Disk Drives	36.4-GB Ultra3 SCSI 10,000 rpm drive	DS-RZ3FD-WA
	72.8-GB Ultra3 SCSI 10,000 rpm drive	DS-RZ3GA-WA

Internal Tape Drives	DAT 12/24-GB 4-mm 5.25-inch half-height SCSI tape drive, top gun blue; requires single-ended UltraSCSI or Ultra2/Ultra3 adapter (3X-DEPVZ-AA, 3X-KZPCA-AA, 3X-KZPEA-DB, or KZPCM-DA) and SCSI cable (SCSI adapter, SN-PBXKP-BA required)	TLZ10-LB
	DAT 20/40-GB tape drive, LVD, carbon black (C5686B) See Supported Options List -- http://www.compaq.com/alphaserver/options/asds10/asds10_options.html -- for complete listing of supported options and configuration details. See option specific QuickSpecs for complete list of country specific SKUs.	3R-A4752-AA
	DAT 36/72-GB 4-mm 5.25-inch half-height LVD SCSI tape drive, carbon black (Q1522A)	3R-A4544-AA
	DS10 SCSI cable kit (with connections for three internal drives)	3X-BN51A-SE
	NOTE: The DS10 SCSI cable kit is included with the Front Access Storage Cage. The DS10 SCSI cable kit is required for Internal Storage Cage systems with SCSI disks or tapes.
	DLT 40/80-GB VS 80 half-height tape drive (337699-B21)	3R-A5071-AA

Step 2c – Front Access Storage Cage - System Disk or Tape Drive - Mandatory

1.	Floppy Disk Drive
2.	Internal Drive Bay
3.	CD-ROM
4.	Compaq Universal Drive Bay
5.	Compaq Universal Drive Bay
6.	Internal Drive Bay

MR0053

Front Access Storage Cage System Disk Drive Selection - Mandatory

Selection of one system disk drive is mandatory for each Front Access Storage Cage
Mandatory selection of SCSI adapter is required for Front Access Storage Cage
SCSI cable with connections to the four disk drives is included with the Front Access Storage Cage

DS10 Storage Configuration Rules with Selection of Front Access Storage Cage:

DS10 Systems configured with Front Access Storage Cage include a 600-MB 24X slim-line CD-ROM and 1.44-MB drive in dedicated drive slots
DS10 Systems configured with the Front Access Storage Cage include four storage bays (two Universal SCSI disk drives and two internal SCSI drives) which can be configured as follows:
- Maximum of two internal disk drives (3.5-inch x 1-inch drives) and two Universal disk drives
(3.5-inch x 1-inch) or one Front Access Universal tape drive (DAT) and two internal disk drives.
Mandatory selection of SCSI adapter for Front Access Cage Systems
SCSI cable included with Front Access Cage

NOTE: IDE drives may not be used in Front Access Cage systems

Internal SCSI Disk Drives (For Drives Internal to System Enclosure)	36.4-GB Ultra3 SCSI 10,000 rpm drive	DS-RZ3FD-WA
	72.8-GB Ultra3 SCSI 10,000 rpm drive	DS-RZ3GA-WA

Universal Disk Drives (For Front Access Storage Cage)	18.2-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive	3R-A3848-AA
	36.4-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive	3R-A3838-AA
	36.4-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive	3R-A3849-AA
	72.8-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive	3R-A3839-AA
	72.8-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive	3R-A3851-AA
	146-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive	3R-A3841-AA

Optional Universal Tape Drives (For Front Access Storage Cage)	DAT 20/40-GB Universal tape drive, LVD, uses two slots. (Q1546A) See Supported Options List - http://www.compaq.com/alphaserver/options/asds10/asds10_options.html -- for complete listing of supported options and configuration details. See option specific QuickSpecs for complete list of country specific SKUs.	3R-A4745-AA
	DAT 36/72-GB LVD Universal tape drive, carbon black; uses two slots in 3X-BA10B-AA or DS-SL13R-xx storage shelves (Q1529A)	3R-A4547-AA

Step 2d – Internal SCSI Adapters and Cable Kits

Front Access Storage Cage: - Mandatory selection of SCSI adapter is required for Front Access Storage Cage - Front Access Storage Cage includes SCSI cable kit for connection to four disks Internal Storage Cage: - Mandatory selection of SCSI adapter and SCSI cable kit are required for Standard Storage Cage systems with SCSI disk or tapes

SCSI Adapters (For Internal and Front Access Drives)	PCI 1-channel Ultra2 SCSI adapter (LVD)	3X-KZPCA-AA
	PCI 2-channel multi-mode Ultra3 LVD SCSI adapter, VHDCI (Tru64 UNIX V5.1 or higher and OpenVMS V7.2-2 or higher) No shared bus support with OpenVMS. No shared tape/library support with OpenVMS or Tru64 UNIX. 3X-KZPEA-DB adapter supports shared bus using hard disk drives under Tru64 UNIX V5.1A with PK4 and NHD5 or V5.1B and TruCluster V5.1B with Initial Patch Kit installed; supports maximum of two nodes per shared bus; requires 3X-BN55A-01 Y-cable and connector plug assembly, and 3X-H32CT-AA external LVD terminator per shared bus.	3X-KZPEA-DB
	NOTE: Tru64 UNIX Initial Patch Kit for V5.1B located at: http://ftp1.support.compaq.com/public/unix/5.1b
	NOTE: Patch kit required, kit available at: http://ftp1.support.compaq.com/public/Digital_UNIX/v5.1/
	PCI combo card - PCI 2-channel UltraSCSI single-ended adapter and 10/100 Mbit	KZPCM-DA
	PCI combo card - 1-channel Ultra2 SCSI (LVD) Graphics, 10/100 Ethernet (Tru64 UNIX and OpenVMS only)	3X-DEPVZ-AA
	PCI 1-channel UltraSCSI RAID controller (Tru64 UNIX and OpenVMS only)	KZPAC-AA
	NOTE: Internal or Front Access Disk Drives connected to a KZPAC controller are not capable of implementing the fault management features of this controller, such as 'hot spare' and 'automatic rebuilds'- manual rebuilds are supported.
	PCI 3-port UltraSCSI RAID controller (4-MB/8-MB cache) (Tru64 UNIX V4.0F, OpenVMS V7.2-1)	KZPAC-CA/CB
	NOTE: Internal or Front Access Disk Drives connected to a KZPAC controller are not capable of implementing the fault management features of this controller, such as 'hot spare' and 'automatic rebuilds' - manual rebuilds are supported.
	PCI 1-channel Ultra2 SCSI RAID controller, 4-MB cache (Linux-Ready Systems only)	SN-KZPBC-AA
	PCI 3-channel Ultra2 SCSI RAID controller, 32-MB cache (Linux-Ready Systems only)	FR-PCTAR-IB
	PCI 3-channel Ultra2 SCSI RAID controller, 64-MB cache (Linux-Ready Systems only)	FR-PCTAR-IC
	DS10 SCSI cable kit (with connections for three internal drives)	3X-BN51A-SE
	NOTE: The DS10 SCSI cable kit is included with the Front Access Storage Cage. The DS10 SCSI cable kit is required for Internal Storage Cage systems with SCSI disks or tapes.

Desktop Power Cords	North America, 2.5-meter	3X-BN46K-2E
	North America, 200 to 240V, 75-inch	BN18J-1K
	Australia, New Zealand, 2.5-meter (103541-011)	BN19H-2E
	Central Europe, 2.5-meter	BN19C-2E
	Denmark, 2.5-meter (103541-481)	BN19K-2E
	Egypt, India, South Africa, 2.5-meter (103541-AR1)	BN19S-2E
	Israel, 2.5-meter	BN18L-2E
	Italy, 2.5-meter	BN19M-2E
	Japan, 2.5-meter, Dentori approved	3X-BN46G-02
	Switzerland, 2.5-meter (103541-511)	BN19E-2E
	UK, Ireland, 2.5-meter	BN19A-2E

Rackmount (M-Series Cabinet) Power Cords	U.S./Canada	BN20Z-4E
	Non-U.S.	3X-BN46L-4E
	Japan, 4.5-meter (right-angle connector)	3X-BN46D-4E

Options

Step 3 – Memory – Optional

Maximum 2 GB memory Systems include one memory kit; maximum two memory kits per system - each kit includes two industry-standard DIMMs with ECC support
	512-MB memory kit, two 200-pin, 100-MHz, 256-MB DIMMs	3X-MS310-DA
	1-GB memory kit, two 200-pin, 100-MHz, 512-MB DIMMs	3X-MS310-EA

Step 4 – DVD-ROM Drive – Optional

	Optional 16X DVD-ROM Drive - Supported in Internal Storage Cage only - not supported in Front Access Storage Cage - supported in slot 3 of the Internal Storage Cage and replaces standard CD-ROM (see diagram on page 6, Step 2b). Ships as spare, not integrated in manufacturing.	3X-PBXRV-BA
	Optional 48X half-height DVD/CD-RW combo, carbon black, for DS10 Internal Storage Cage, supported in 3X-BA10A-AA only	3X-A4412-BA

Step 5 – M-Series Cabinets or Series 10000 Rack– Optional

Step 5a - M-Series Cabinets (Optional)

M-Series cabinet enclosures support up to 12 DS10 systems (H9A15). M-Series enclosures require selection of the following items: H9A10, or H9A15 Cabinet, 120V or 240V Cabinet front door based on cabinet height Factory integration
Cabinet Configuration Chart for AlphaServer DS10 Rackmount Systems
A minimum of two AlphaServer DS10 systems is required in the H9A15 M-Series cabinet. Each system requires a DS10 M-Series Rackmount kit (3X-PBX01-AB). Each system requires a rackmount power cord.
NOTE: The number of ballast kits required is determined only by the number of system boxes. Ballast kits are required according to the following chart. For more information on M-Series Cabinet Enclosures, see http://www.compaq.com/alphaserver/products/m-series/index.html

Cabinet Configuration Chart for AlphaServer DS10 (3U) Rackmount Systems with Disk Shelves (12U)

M-Series Cabinet	System Rack Kit per DS10 system	M-Series Cabinet Height/Space	DS10 Systems	StorageWorks DS-SL13R/ 3R-A4075-AA/ 3R-A4076-AA* Disk Shelf	Ballast Kits Required
H9A10-MC/MD	3X-PBX01-AB	67-inch/32U	1 or 2	6	2
			3 or 4	6	1
			5	6	1
			6	4	0
			7	2	0
			8, 9, or 10	0	0
H9A15-MC/MD	3X-PBX01-AB	79-inch/39U	2 or 3	6	2
			4	6	1
			5	6	1
			6	4	1
			7	2	0
			8 to 12	0	0

* 3R-A4075-AA and 3R-A4076-AA are not supported in a shared-SCSI cluster using the 3X-KZPEA-DB.

M-Series Rackmount Kit for AlphaServer DS10	Rackmount kit must be ordered separately DS10 M-Series rackmount kit	3X-PBX01-AB
NOTE: Factory integration of a DS10 system drawer in a 9000 Series Rackmount Cabinet using rack kit, 3X-PBX01-AA, is not supported. Contact Custom Systems.

M-Series Cabinets	67-inch cabinet enclosure with 59.5-inch or 34U of usable vertical space; 120V dual-24A controller, each with 10 NEMA 5-15R outlets, input power plug NEMA L5-30P, Americas, Asia Pacific; includes rear door, top fan tray, and two H7600-AA power distribution units	H9A10-MC
	67-inch cabinet enclosure with 59.5-inch or 34U of usable vertical space; 240V dual-16A controller, each with 12 IEC C13 outlets, input power plug IEC 309, 16A, Europe; includes rear door, top fan tray, and two H7600-DB power distribution units	H9A10-MD
	79-inch cabinet enclosure with 71.7-inch or 41U of usable vertical space; 120V dual-24A controller, each with 10 NEMA 5-15R outlets, input power plug NEMA L5-30P, Americas, Asia Pacific; includes rear door, top fan tray, and two H7600-AA power distribution units	H9A15-MC
	79-inch cabinet enclosure with 71.7-inch or 41U of usable vertical space; 240V dual-16A controller, each with 12 IEC C13 outlets, input power plug IEC 309, 16A, Europe; includes rear door, top fan tray, and two H7600-DB power distribution units	H9A15-MD

M-Series Cabinet Front Door	Requires selection of door based on cabinet height
	Front door, top gun blue, for H9A10-MC/MD cabinet enclosure	H9C10-TF
	Front door, top gun blue, for H9A15-MC/MD cabinet enclosure	H9C15-TF

M-Series Cabinet Factory Integration	Mandatory selection
	Factory Integration of systems and storage devices assembled and configured in cabinet enclosure for H9A10 or H9A15 cabinet enclosures	YS-ASCAA-AA

M-Series Cabinet Ballast Kits	Add ballast kits as required Ballast is added to a cabinet at particular locations for specific configurations to meet safety regulations for installation, operation, and service; see Cabinet Configuration Charts
	Two 35 to 40 lb steel plates	H9C10-MC

M-Series Cabinet Rackmount Power Cords	U.S./Canada	BN20Z-4E
	Non-U.S.	BN35S-4E
	Japan, 2.5-meter	3X-BN46D-4E

CustomSystems Support
Cabinets that contain systems and storage must be assembled by qualified assemblers: HP Manufacturing, CustomSystems, or an authorized HP Certified Integration Partner. For custom integration of systems, options, cabinet expansion offerings, and additional HP and third-party devices, or for other cabinets, doors, and trim kits of a different color, contact CustomSystems at 1-800-AT COMPAQ, or your local authorized HP Certified Integration Partner.

Step 5b Rack 10000 Series - Optional
10000 Series rack enclosure supports up to 12 DS10 systems (10642) 10000 Series rack enclosure requires selection of the following items: 10642 rack Rack sidewall kit or baying kit Deployable stabilizer Power Distribution Unit (PDU) Ballast kits (if required) Factory integration
Cabinet Configuration Chart for AlphaServer DS10 Rackmount Systems
10000 Series rack requires selection of a power distribution unit Each system requires a DS10 Rack-mount kit (3X-PBX01-AA). Each system requires a rackmount power cord.
NOTE: The number of ballast kits required is determined by the number of system boxes. Ballast kits are required according to the following chart. For more information on Rack 10000 Series Enclosures, see http://h18004.www1.hp.com/products/quickspecs/10995_div/10995_div.html
Rack Configuration Chart for AlphaServer DS10 (3U) Rackmount Systems with Disk Shelves (12U)

10000 Series Rack	System Rack Kit per DS10 system	Series 10000 Height/Space	DS10 Systems	StorageWorks DS-SL13R/ 3R-A4075-AA/ 3R-A4076-AA* Disk Shelves	Ballast Kits Required
3R-A3894-AA (10642 42U)	3X-PBX01-AA	79-inch/41U	2-3	6	2
			4	6	1
			5	6	1
			6	4	1
			7	2	0
			8 to 12	0	0

* 3R-A4075-AA and 3R-A4076-AA are not supported in a shared-SCSI cluster using the 3X-KZPEA-DB.

10000 Series Rackmount Kit for AlphaServer DS10 Rack 10000 Series (10642)	Rackmount kit must be ordered separately
	DS10 Series 10000 rackmount kit	3X-PBX01-AA
	79-inch cabinet enclosure with 73.5-inch or 42U of usable vertical space; includes front and rear doors, no side panels, shock pallet	3R-A3894-AA

Side Panel Kit	42U graphite metallic	3R-A3895-AA

Baying Kit	(Carbon) - Used to join two or more 10000 Series racks	3R-A4125-AA

Deployable Stabilizer Kit	Mandatory selection	2T-H9C30-MK

Power Distribution Unit (PDU)	Mandatory selection
Power Distribution Unit (PDU)	Single Phase, Double Power Controller, 16 outlet North America/Japan 240V	3X-H7609-EB
	Single Phase, Double Power Controller, 16 outlet, Europe 240V	3X-H7609-DB

Rack 10000 Series Factory Integration	Mandatory selection
	Factory Integration of systems and storage devices assembled and configured in 10642 rack enclosure	YS-ASCAA-AA

10000 Series Rack Ballast Kit	Add ballast kits as required
	Ballast is added to the rack at particular locations for specific configurations to meet safety regulations for installation, operation and service. See Rack Configuration Charts.	2T-H9C30-MA

Series 10000 Rackmount Power Cord	Series 10000 Rackmount Power Cord	BN35S-4E

Step 6 – External Storage – Optional

Tape drives require an LVD adapter (3X-KZPCA-AA or 3X-KZPEA-DB) or single-ended UltraSCSI adapter (KZPCM-DA) and country-specific power cord.
NOTE: 3X-KZPEA-DB does not support shared tape/libraries.

Tape Devices

DAT Tabletop Tape Drives	DAT 20/40-GB 4-mm Wide Ultra2 (LVD) tabletop SCSI tape drive with 120V North America power cord, carbon black; requires Ultra2 (LVD) adapter	157770-002
	Same as above, International	157770-B32
	Same as above, Japan	157770-292
	DAT 36/72-GB LVD tabletop SSI tape drive, carbon black See Supported Options List -- http://www.compaq.com/alphaserver/options/asds10/asds10_options.html -- for complete listing of supported options and configuration details. See option specific QuickSpecs for complete list of country specific SKUs.	Q1523A
	DAT 40-GB LVD tabletop tape drive, carbon black See Supported Options List -- http://www.compaq.com/alphaserver/options/asds10/asds10_options.html -- for complete listing of supported options and configuration details. See option specific QuickSpecs for complete list of country specific SKUs.	C5687C

DAT Hot-plug Tape Drives	DAT 36/72-GB hot-plug LVD Universal tape drive, carbon black; uses two slots in 43xxx storage shelves (Q1529A)	3R-A4547-AA
	DAT 20/40-GB hot-plug LVD Universal tape drive; carbon black; uses two slots in 43xxx storage shelves (Q1546A)	3R-A4745-AA

DAT Autoloaders	DAT 20/40-GB auto loader external; requires BN31W-xx SCSI cable and 3X-KZPCA-AA, or 3X-DEPVZ-AA adapter, North America	166505-001
	Same as above, International	166505-B31
	Same as above, Japan	166505-291
	SureStore DAT 40x6e external auto loader See Supported Options List -- http://www.compaq.com/alphaserver/options/asds10/asds10_options.html -- for complete listing of supported options and configuration details. See option specific QuickSpecs for complete list of country specific SKUs.	C5717C

DLT/SDLT Tabletop Tape Drives	DLT8000 tabletop 40/80-GB DLT external tape drive, carbon black - requires 3X-KZPCA-AA LVD adapter - U.S.	146197-B23
	Same as above – Japan	146197-293
	SDLT tabletop 110/220-GB external tape drive, carbon black- requires 3X-KZPCA-AA or 3X-KZPEA-DB LVD adapter - U.S.	192103-002
	Same as above – International	192103-B32
	Same as above – Japan	192103-292
	SDLT tabletop 160/320-GB external tape drive, carbon black - requires 3X-KZPCA-AA or 3X-KZPEA-DB LVD adapter - U.S.	257319-001
	Same as above - International	257319-B31
	Same as above - Japan	257319-291
	DLT 40/80-GB VS 80 half-height external tape drive (337699-B22)	3R-A4982-AA
	DLT 40/80-GB VS 80 half-height external tape drive, International (337699-B31)	3R-A4984-AA
	DLT 40/80-GB VS 80 half-height external tape drive, Japan (337699-291)	3R-A4983-AA

Ultrium Tabletop Tape Drives	Ultrium 460 tabletop tape drive, four per system, two per SCSI bus, U.S. Supported with 3X-KZPEA-xx, KZPCA-xx, and DEPVZ SCSI adapters only. Ultrium 460 tape drives are cluster friendly devices, but cannot be shared by cluster members. Tru64 UNIX V5.1A requires Patch Kit 4: T64V51AB21AS0004-20030206.tar Tru64 UNIX V5.1B requires Patch Kit 1: T64v51bb03as0001-20021229.tar	Q1519A
	Ultrium 460 tabletop tape drive, same as above, International	Q1520A

DLT/SDLT Tape Libraries	Rackmount kit for H9Axx M-Series cabinets - required for mounting MSL5000 series in M-Series cabinets	254795-001

	MSL5026DLX, DLT tabletop library with one 40/80-GB DLT tape drive, LVD	231821-B21
	MSL5026DLX, DLT tabletop library with two 40/80-GB DLT tape drives, LVD	231821-B22
	MSL5026DLX or MSL5026SL, DLT/SDLT rackmount library, 0 drives - requires rackmount kit (254795-001)	231979-B21
	MSL5026DLX, DLT rackmount library with one 40/80-GB DLT tape drive, LVD - requires rackmount kit (254795-001)	231891-B21
	MSL5026DLX, DLT rackmount library with two 40/80-GB DLT tape drives, LVD - requires rackmount kit (254795-001)	231891-B22

	MSL5026S2, SDLT2 tabletop library with one 160/320-GB SDLT tape drive, LVD	293473-B21
	MSL5026S2, SDLT2 tabletop library with two 160/320-GB SDLT tape drives, LVD	293473-B22
	MSL5026S2 SDLT rackmount library, 0 drives, LVD - requires rackmount kit (254795-001)	293472-B21
	MSL5026S2, SDLT2 rackmount library with one 160/320-GB SDLT tape drive, LVD	293472-B22
	MSL5026S2, SDLT2 rackmount library with two 160/320-GB SDLT tape drive, LVD	293472-B23
	MSL5026S2, SDLT2 rackmount library with one 160/320-GB SDLT tape drive with Fibre Channel, LVD	293472-B24
	MSL5026S2, SDLT2 rackmount library with two 160/320-GB SDLT tape drive with Fibre Channel, LVD	293472-B25

	MSL5026SL, SDLT tabletop library with one 110/220-GB SDLT tape drive, LVD	302511-B21
	MSL5026SL, SDLT tabletop library with two 110/220-GB SDLT tape drives, LVD	302511-B22
	MSL5026SL, SDLT rackmount library with one 110/220-GB SDLT tape drive, LVD	302512-B21
	MSL5026SL, SDLT rackmount library with two 110/220-GB SDLT tape drives, LVD	302512-B22
	MSL5052, 0 drives, LVD, rackmount	255102-B21
	MSL5052SL SDLT tabletop library with two 110/220-GB drives, LVD	249490-B21
	MSL5052SL SDLT rackmount library with two 110/220-GB drives, LVD - requires rackmount kit (254795-001)	249491-B21
	MSL5052SL SDLT 110/220-GB drive field upgrade, LVD	231823-B22

	MSL5052S2, SDLT2 tabletop library with two 160/320-GB SDLT tape drives, LVD, graphite	293476-B21
	MSL5052S2, SDLT2 rackmount library with two 160/320-GB SDLT tape drive, LVD	293474-B21
	MSL5052S2, SDLT2 rackmount library with two 160/320-GB SDLT tape drive with Fibre Channel, LVD	293474-B24

	MSL6030 LTO Ultrium 460, 30 cartridge 5U, with 0 drives, rackmount LVD	330731-B21
	MSL6030 LTO Ultrium 460, 30 cartridge 5U, with one drive, rackmount LVD	330731-B22
	MSL6030 LTO Ultrium 460, 30 cartridge 5U, with two drives, rackmount LVD	330731-B23
	MSL6030 LTO Ultrium 460, 30 cartridge 5U, with one drive, rackmount Fibre	330731-B24
	MSL6030 LTO Ultrium 460, 30 cartridge 5U, with two drives, rackmount Fibre	330731-B25
	MSL6030 LTO Ultrium 460, 30 cartridge 5U, with one drive, tabletop LVD	330788-B21
	MSL6030 LTO Ultrium 460, 30 cartridge 5U, with two drives, tabletop LVD	330788-B22

	MSL6060 LTO Ultrium 460, 60 cartridge 10U, with 0 drives, rackmount LVD	331196-B23
	MSL6060 LTO Ultrium 460, 60 cartridge 10U, with two drives, tabletop LVD	331195-B21
	MSL6060 LTO Ultrium 460, 60 cartridge 10U, with two drives, rackmount LVD	331196-B21
	MSL6060 LTO Ultrium 460, 60 cartridge 10U, with two drives, rackmount Fibre	331196-B22

	ESL9326SL SDLT tape library with six 110/220-GB SDLT tape drives, LVD	234615-B21
	ESL9326SL SDLT tape library with eight 110/220-GB SDLT tape drives, LVD	234615-B22
	ESL9326SL SDLT tape library with 16 110/220-GB SDLT tape drives, LVD	234615-B26

3U Rackmount Tape Drive Enclosure	3U LVD Rackmount Tape Drive Enclosure for use in H9Axx M-Series Cabinets, 0 drives, carbon black	274338-B21
	Rackmount Kit for H9Axx Series Cabinets, carbon black - required for mounting 3U Rackmount Tape Drive Enclosure in M-Series cabinet	3R-A3804-AA
	NOTE: The 3U Tape Drive Enclosure supports up to four internal half-height removable devices, or up to two full height devices. Select up to four DAT devices, or two DLT/SDLT devices with 3U Rackmount Tape Drive Enclosure (274338-B21), or select preconfigured configurations listed below
	DAT 20/40-GB 3U tape drive, requires 3X-KZPCA-AA LVD adapter, carbon black (157769-B22)	3R-A3752-AA
	DLT8000 40/80-GB tape drive, requires 3X-KZPCA-AA LVD adapter	146196-B22
	SDLT 110/220-GB tape drive, requires 3X-KZPCA-AA or 3X-KZPEA-DB LVD adapter	192106-B25
	SDLT 160/320-GB tape drive, requires 3X-KZPCA-AA or 3X-KZPEA-DB LVD adapter, carbon black	257319-B21
	Ultrium 460 tape drive, requires 3X-KZPEA-xx, KZPCA-xx, or DEPVZ SCSI adapter, carbon black; Tru64 UNIX V5.1A requires Patch Kit 4: T64V51AB21AS0004-20030206.tar; Tru64 UNIX V.1B requires Patch Kit 1: T64v51bb03as0001-20021229.tar; OpenVMS support: minimum V7.2-2	Q1518A
	SureStore DAT 40x6i internal auto loader (supported in 274338-B21). See Supported Options List -- http://www.compaq.com/alphaserver/options/asds10/asds10_options.html -- for complete listing of supported options and configuration details. See option specific QuickSpecs for complete list of country specific SKUs.	C5716A
	Preconfigured Configurations
	DLT 40/80-GB, 3U rackmount kit, carbon black	274332-B21
	DLT 40/80-GB, dual-drive, 3U rackmount kit, carbon black	274335-B21
	SDLT 110/220-GB, 3U rackmount kit, carbon black	274331-B21
	SDLT 110/220-GB, dual-drive, 3U rackmount kit, carbon black	274334-B21

5U Rackmount Tape Drive Enclosure	5U LVD Rackmount Tape Drive Enclosure, carbon black, for use in H9Axx M-Series Cabinets, 0 drives	274339-B21
	Rackmount Kit for H9Axx Series Cabinets, carbon black - required for mounting 5U Rackmount Tape Drive Enclosure in M-Series cabinet	254795-001
	NOTE: The 5U Rackmount Tape Drive Enclosure supports four full-height devices; select up to four DLT or SDLT devices with 274339-B21, or select preconfigured configurations listed below.
	DLT8000 40/80-GB tape drive, requires 3X-KZPCA-AA LVD adapter, carbon black	146196-B22
	SDLT 110/220-GB tape drive, requires 3X-KZPCA-AA or 3X-KZPEA-DB LVD adapter, carbon black	192106-B25
	SDLT 160/320-GB tape drive, requires 3X-KZPCA-AA or 3X-KZPEA-DB LVD adapter, carbon black	257319-B21
	Preconfigured configurations
	SDLT 110/220-GB Tape Array III, 5U rackmount kit, carbon black	274336-B21
	DLT 40/80-GB Tape Array III, 5U rackmount kit, carbon black	274337-B21
	DLT Tape Array III Model 0 enclosure, U.S.	168047-001
	Same as above, International	168047-B31
	Same as above, Japan	168047-291

Network Storage Routers	NOTE: The following Network Storage Routers are supported with MSL5000 or ELS9000 tape libraries:
	NSR e1200 one Fibre Channel x two LVD FC to SCSI Data Router, Tru64 UNIX and OpenVMS, carbon black (262672-B21)	3R-A3746-AA
	NSR e2400 two Fibre Channel x four LVD FC to SCSI Data Router with card cage, Tru64 UNIX and OpenVMS, carbon black (262665-B21)	3R-A3935-AA
	NSR e2400 two Fibre Channel x four LVD FC to SCSI Data Router with no card cage, Tru64 UNIX and OpenVMS, carbon black (262664-B21)	3R-A3745-AA
	NSR N1200 one Fibre Channel x two LVD FC to SCSI Data Router, Tru64 UNIX and OpenVMS, supports tape drives and tape libraries (280823-B21)	3R-A3747-AA
	NSR m2402 two Fibre Channel x four LVD FC to SCSI Data Router, Tru64 UNIX and OpenVMS 262653-B21)	3R-A3740-AA
	NSR m2402 two Fibre Channel x four HVD FC to SCSI Data Router, Tru64 UNIX and OpenVMS (262654-B21)	3R-A3741-AA
	NSR ESL e2400-160 two Fibre Channel x four LVD Data Router, Interface Card (330839-B21)	3R-A4743-AA
	NSR MSL e1200-160 one Fibre Channel x two LVD Data Router, CD, graphite	330728-B21
	NSR MSL e1200-160 one Fibre Channel x two LVD Data Router, CD, opal	330728-B22

Storage Controllers/Host Bus Adapters for StorageWorks Pedestals and Shelves
	Storage controllers require a minimum operating system revision of Tru64 UNIX V4.0F or OpenVMS V7.1-2 unless noted otherwise.
	Each storage controller/adapter uses one PCI slot

	Maximum # Supported
	Tru64 UNIX	OpenVMS	Linux
PCI-to-Fibre Channel host bus adapter (168794-B21)	2	2	-	DS-KGPSA-CA
PCI to 2–Gb Fibre Channel adapter, 64-bit/33 MHz, single-channel (261329-B21)	2	2	-	DS-KGPSA-DA
PCI-X to 2-Gb Fibre Channel adapter, 64-bit/66-MHz, single-channel (302784-B21) OpenVMS V7.2-2 requires TIMA Kit: VMS722_FIBRE_SCSI-V0400 OpenVMS V7.3-1 requires TIMA Kit: VMS73_1_SCSI_FIBRE_V0300 OpenVMS V7.3-1 clusters requires TIMA Kit: VMS73_1_cLUSTER_V0100 Tru64 UNIX V5.1A requires NHD 6 and T64V51AB21AS0004-20030206.tar Tru64 UNIX V5.1B requires Patch Kit 1: T64V51BB03AS0001-20021229.tar DS-KGPSA-EA does not support MSA 1000	2	2	-	DS-KGPSA-EA
Fibre Channel cable BNGBX-xx=02, 05, 15, 30, 50 meters (234457-B2x) 234457-B2x=1 (02m), 2 (05m), 3