Compaq AlphaServer TS20/TS40 - World Wide QuickSpecs

Overview

Compaq AlphaServer TS20/TS40

1.
CPU Fan Assembly
7.
Operator control panel

2.
PCI card cage
8.
Optional hard disk drive bay

3.
I/O port module
9.
Floppy drive

4.
PCI access cover
10.
Optional tape drive bay (3.5") only

5.
PCI card-cage fan assembly
11.
System card cage

6.
CD-ROM drive
12.
Top Cover

At A Glance

Compaq AlphaServer TS20/40 Systems include:
Alpha 21264 68/833-MHz CPU with 8-MB L2 Dual Data Rate Cache
14 64-bit PCI I/O expansion slots
512-MB, 1-GB, 2-GB, or 4-GB memory options
1.44-MB diskette drive
600-MB 40X IDE CD-ROM drive
Two 9-pin serial ports
One 25-pin parallel port
RMC dedicated serial port, 6-pin MMJ connector
Dual USB ports
Keyboard and mouse port
Power supply
AC (auto sensing)
-48VDC (normal) or -32 to -72VDC for full range
U.S. English keyboard with North America orders
3-button mouse
Integral remote system management console
Customer documentation
Tru64™ UNIX™ or OpenVMS Factory Installed Software
90-day software warranty
Protected by Compaq Services, including three-year hardware warranty, on-site with 5 x 9 next business day response

Standard Features

Processor	Alpha 21264 68/833-MHz CPU

Cache Memory	8-MB L2 Dual Data Rate Backup Cache

Upgradability	Supports additional processors and upgrades of memory and hard drives

Memory	Minimum	512 MB
	Maximum	16 GB (16 DIMM slots) – AlphaServer TS20 32 GB (32 DIMM slots) – AlphaServer TS40

Network Controller	Choice of Ethernet controllers

Expansion	PCI I/O slots	14 slots (9 primary and 5 secondary; refer to PCI Configuration Guidelines)

Storage	Diskette Drive	1.44 MB diskette drive in dedicated slot
	CD-ROM	600-MB 40X IDE CD-ROM
	Hard Drives	Choice of 9.1-GB, 18.2-GB, or 36.4-GB drives

Interfaces	Parallel	1 25-pin parallel port
	Serial	2 9-pin serial ports
	USB	Dual USB ports
	Keyboard	1
	Mouse	1
	Remote systems management	1 dedicated remote systems management port

Graphics	Optional

Form Factor	Rackmount (Standard or NEBS certified cabinet)

Power Supply	Rackmount (Standard or NEBS certified cabinet)

Manageability	Compaq Insight Manager

OS Support	AlphaServer TS20/40 Tru64 UNIX systems include pre-installed software, Base license, Unlimited User license, Server Extension license, Internet Express, iPlanet Directory Server, iPlanet Enterprise Server, and Compaq Secure Web Server
	AlphaServer TS20/40 OpenVMS systems include pre-installed software, Base license with System Manager license and Enterprise Integration Server License Package for OpenVMS V3.1
	Minimum OS support - Tru64 UNIX V5.1A or Open VMS V7.1-2

Service and Support	Protected by Compaq Services including a Three-year on-site hardware warranty with next business day response. Software warranty is a 90-day telephone advisory. Training, consulting, network integration, software support, comprehensive system maintenance and guaranteed uptime services are also available for customers requiring higher levels of service and support.

PCI Configuration Guidelines

Physical slots 1 through 5 support only PCI33 Type 0 single-function PCI adapter cards that use a single PCI functional interrupt line.
Physical slots 1 through 5 do not suport PCI33 Type 1 multifunction graphics adapters, multiport Ethernet adapters, etc.
MEMORY CHANNEL (CCMAB-AA) PCI adapters are ONLY supported installed within physical slots 6-14.
IPCON-AA PCI adapter (See input # 7) in physical slot 1 or 5, while a SS7 card is concurrenly installed in physical slot 5 or 1, respectively.

Systems

Step 1 – Select system

AlphaServer TS20/40 systems require the mandatory selection of the following items:

Disk drive cage or StorageWorks shelf (see Step 5)
- Disk drive cage requires Ultra2 SCSI LVD (3X-KZPCA-AA)
- StorageWorks shelf requires UltraSCSI adapter and SCSI cable (see Step 10)
System disk drive (Step 5)
Ethernet adapter (Step 7)
Chassis Rackmount Kit (see Step 8) - each server includes dress bezel and two power cords
Non-North American systems require country-specific keyboard (see Step 16); North American systems include U.S. English keyboard
Software media and documentation for first system onsite

NOTE: Bold face part numbers indicate NEBS qualified. For system integration of options with 6-3 part numbers, contact CustomSystems. Option part numbers identified with the notation "U.S./Canada orders"and "Other country orders"refers specifically to the country where the order originates, and indicates the valid and orderable part numbers in the respective geographies.

AlphaServer TS20 Systems
TS20	OS	CPU	PCI I/O Slots	Memory/Cache	Order No.
AC	Tru64 UNIX	833 MHz	14	512 MB/8 MB	DA-T56RA-CA
AC	Tru64 UNIX	833 MHz	14	1 GB/8 MB	DA-T56RA-DA
AC	Tru64 UNIX	833 MHz	14	2 GB/8 MB	DA-T56RA-EA
DC	Tru64 UNIX	833 MHz	14	512 MB/8 MB	DA-T56RB-CA
DC	Tru64 UNIX	833 MHz	14	1 GB/8 MB	DA-T56RB-DA
DC	Tru64 UNIX	833 MHz	14	2 GB/8 MB	DA-T56RB-EA

AC	OpenVMS	833 MHz	14	512 MB/8 MB	DY-T56RA-CA
AC	OpenVMS	833 MHz	14	1 GB/8 MB	DY-T56RA-DA
AC	OpenVMS	833 MHz	14	2 GB/8 MB	DY-T56RA-EA
DC	OpenVMS	833 MHz	14	512 MB/8 MB	DY-T56RB-CA
DC	OpenVMS	833 MHz	14	1 GB/8 MB	DY-T56RB-DA
DC	OpenVMS	833 MHz	14	2 GB/8 MB	DY-T56RB-EA

AlphaServer TS40 Systems
TS40	OS	CPU	PCI I/O Slots	Memory/Cache	Order No.
AC	Tru64 UNIX	833 MHz	14	512 MB/8 MB	DA-T64CA-CA
AC	Tru64 UNIX	833 MHz	14	1 GB/8 MB	DA-T64CA-DA
AC	Tru64 UNIX	833 MHz	14	2 GB/8 MB	DA-T64CA-EA
AC	Tru64 UNIX	833 MHz	14	4 GB/8 MB	DA-T64CA-FA
DC	Tru64 UNIX	833 MHz	14	512 MB/8 MB	DA-T64CB-CA
DC	Tru64 UNIX	833 MHz	14	1 GB/8 MB	DA-T64CB-DA
DC	Tru64 UNIX	833 MHz	14	2 GB/8 MB	DA-T64CB-EA
DC	Tru64 UNIX	833 MHz	14	4 GB/8 MB	DA-T64CB-FA

AC	OpenVMS	833 MHz	14	512 MB/8 MB	DY-T64CA-CA
AC	OpenVMS	833 MHz	14	1 GB/8 MB	DY-T64CA-DA
AC	OpenVMS	833 MHz	14	2 GB/8 MB	DY-T64CA-EA
AC	OpenVMS	833 MHz	14	4 GB/8 MB	DY-T64CA-FA
DC	OpenVMS	833 MHz	14	512 MB/8 MB	DY-T64CB-CA
DC	OpenVMS	833 MHz	14	1 GB/8 MB	DY-T64CB-DA
DC	OpenVMS	833 MHz	14	2 GB/8 MB	DY-T64CB-EA
DC	OpenVMS	833 MHz	14	4 GB/8 MB	DY-T64CB-FA

Options

Step 2 - Additional CPU Modules - Optional

AlphaServer TS20 includes one CPU, one additional CPU is supported AlphaServer TS40 includes one CPU, three additional CPUs are supported


	SMP upgrade, includes one 68/833-MHz CPU with 8-MB cache and Tru64 UNIX SMP license	KN610-CB
	SMP upgrade, includes one 68/833-MHz CPU with 8-MB cache and OpenVMS SMP license	KN610-CC

Step 3 - Memory - Optional

Systems include one memory option TS20 systems supports four memory options (total of 16 DIMMs) TS40 systems support eight memory options (total of 32 DIMMs) Memory performance considerations: Interleaved operations reduce the average latency and increase the memory throughput over non-interleaved operations. With one memory option (4 DIMMs) installed, memory interleaving will not occur. With two identical memory options (8 DIMMs) installed, memory read-write operations are two-way interleaved. With four identical memory options (16 DIMMs) installed, memory read-write operations are four-way interleaved, maximizing memory throughput.
	512-MB memory option (4 x 128-MB DIMMs)	MS610-CA
	1-GB memory option (4 x 256-MB DIMMs)	MS610-DA
	2-GB memory option (4 x 512-MB DIMMs)	MS610-EA
	4-GB memory option (4 x 1024-MB DIMMs)	MS610-FA

Step 4 - Additional Power Supplies - Required for redundancy

Power supply included with system provides support for full system Second power supply provides full redundancy Rack kit include two internal power cords regardless of the number of power supplies
	AlphaServer TS20/40 950W 120/240VAC power supply	3X-H7820-AA
	AlphaServer TS20/40 950W –48VDC power supply	3X-H7820-AB

Step 5 - Disk Drive Cage or StorageWorks Shelf - Mandatory

AlphaServer TS20/40 enclosure supports one 2-bay disk drive cage The number of Universal 42xx/43xx StorageWorks shelves or BA36R StorageWorks shelves dependd upon the selected cabinet.

Step 5a - Disk Drive Cage - Requires selection of system disk drive

	Two-bay disk drive cage with cable for use with 1.0² universal drives – requires mandatory selection of one Ultra2 SCSI adapter (3X-KZPCA-AA)	BA610-2D
	NOTE: See AlphaServer TS20/40 Configuration Chart for Storage Adapters in Step 10. Bold face option part numbers indicate NEBS qualified.

System Disk Drives (Supported in Disk Drive Cage)	9.1-GB Ultra3 SCSI 10,000 rpm 1.0" Universal disk drive	3R-A0584-AA
	9.1-GB Ultra3 SCSI 15,000 rpm 1.0" Universal disk drive	3R-A1542-AA
	18.2-GB Ultra3 SCSI 10,000 rpm 1.0" Universal disk drive	3R-A0585-AA
	18.2-GB Ultra3 SCSI 15,000 rpm 1.0" Universal disk drive	3R-A1543-AA
	36.4-GB Ultra3 SCSI 10,000 rpm 1.0" Universal disk drive	3R-A0919-AA
	36.4-GB Ultra3 SCSI 15,000 rpm 1.0" Universal disk drive	3R-A3079-AA
	72.8-GB Ultra3 SCSI 10,000 rpm 1.0" Universal disk drive	3R-A3050-AA

Step 5b - StorageWorks Model 4314R and Model 4354R Universal Drive Shelves

StorageWorks Model 4314R Shelves
StorageWorks Model 4314R and 4354R Ultra2 SCSI (LVD) single-bus and split-bus Universal drive shelves; refer to Compaq StorageWorks Enclosure 4300 Family QuickSpecs when configuring shelves. When selecting a DS-SSL13-Rx split-bus shelf, order two 3X-KZPCA-AA adapters with BN38C-05 cables. Model 43xx shelves are compatible with Wide Ultra2 (LVD) adapters only. Note that the depth of a DS-SL13R-xx shelf does not allow front and rear mounting (Universal shelves require onsite installation).

	StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf, includes one power supply, U.S. (190209-001)	DS-SL13R-AA
	StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf, includes one power supply, Japan	190209-291 (U.S./Canada orders)
		DS-SL13R-AJ (Other country orders)
	StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus, -48VDC, rackmount shelf, includes two redundant power supplies, dress bezel and two DC power cords	3X-SL13R-TA

StorageWorks Model 4354R Shelves	StorageWorks Model 4354R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf, includes two redundant power supplies, U.S. (190211-001)	DS-SL13R-BA
	StorageWorks Model 4354R Ultra3 SCSI (LVD) split-bus Universal drive rackmount shelf, includes two redundant power supplies, Japan	190211-291 (U.S./ Canada orders)
		DS-SL13R-BJ (Other country orders)
	StorageWorks Model 4354R Ultra3 SCSI (LVD) split-bus, -48VDC, rackmount shelf, includes two redundant power supplies, dress bezel and two DC power cords	3X-SL13R-TB

Additional Power Supplies	Additional power supply for single-bus Universal shelf, U.S.	212980-B21 (U.S./Canada orders)
		DS-SE2UP-AA (Other country orders)
	Additional power supply for single-bus Universal shelf, International	119826-B31 (U.S./Canada orders)
		DS-SE2UP-AI (Other country orders)
	NOTE: Model 4314R shelf with DS-KZPCC-AC adapter does not support a disk drive in last slot. Bold face part numbers indicate NEBS qualified.

System Disk Drives (Supported in Model 4314Rand Model 4354R Universal Drive Shelves)	9.1-GB Ultra3 SCSI 10,000 rpm 1.0" Universal disk drive	3R-A0584-AA
	9.1-GB Ultra3 SCSI 15,000 rpm 1.0" Universal disk drive	3R-A1542-AA
	18.2-GB Ultra3 SCSI 10,000 rpm 1.0" Universal disk drive	3R-A0585-AA
	18.2-GB Ultra3 SCSI 15,000 rpm 1.0" Universal disk drive	3R-A1543-AA
	36.4-GB Ultra3 SCSI 10,000 rpm 1.0" Universal disk drive	3R-A0919-AA
	36.4-GB Ultra3 SCSI 15,000 rpm 1.0" Universal disk drive	3R-A3079-AA
	72.8-GB Ultra3 SCSI 10,000 rpm 1.0" Universal disk drive	3R-A3050-AA

StorageWorks Model 4314T Standalone Enclosures	Model 4314T Ultra3 SCSI, Single-bus Tower Enclosure, U.S.	190210-001 (U.S./Canada orders)
		DS-SL13T-AA (Other country orders)
	Model 4314T Ultra3 SCSI, Single-bus Tower Enclosure, International	(190210-B31 (U.S./Canada orders)
		DS-SL13T-AB (Other country orders)
	Model 4314T Ultra3 SCSI, Single-bus Tower Enclosure, Japan	190210-291 (U.S./Canada orders)
		DS-SL13T-AJ (Other country orders)

Step 5c – StorageWorks BA36R Shelf - Requires selection of UltraSCSI adapter and SCSI cable (Step 10) and system disk drive
	StorageWorks Shelf supports seven 3.5 x 1.6 hard disk drives; with addition of redundant power supply, only six drives are supported StorageWorks shelf kits are mounted back-to-back in cabinets
	StorageWorks UltraSCSI single-bus shelf kit	BA36R-RC
	StorageWorks UltraSCSI split-bus shelf kit	BA36R-RD
	3-meter SCSI cable	BN37A-03

System Disk Drives (Supported in StorageWorks BA36R Shelf)	9.1-GB Ultra2 SCSI 7,200 rpm disk drive	DS-RZ1DA-VW
	9.1-GB Ultra3 SCSI 10,000 rpm disk drive	DS-RZ1DD-VW
	18.2-GB Ultra2 SCSI 7,200 rpm disk drive	DS-RZ1EA-VW
	18.2-GB Ultra3 SCSI 10,000 rpm disk drive	DS-RZ1ED-VW
	36.4-GB Ultra3 SCSI 10,000 rpm disk drive	DS-RZ1FC-VW

Step 6 - Internal Removable Media - Optional

System supports three internal removable devices System includes 1.44-MB diskette drive System includes 5.25 "half-height 600-MB 40X IDE CD-ROM drive Removable media slot provide support for one 3.50"AIT, or one 3.50² DAT tape drive media device
	3.50" 20/40-GB 4 mm DAT Ultra2 (LVD) SCSI tape drive, graphite black; requires Ultra2 (LVD) adapter (3X-KZPCA-AA)	3X-SD15X-AA
	3.50" 50/100-GB 8 mm AIT Ultra2 (LVD) SCSI tape drive, graphite black; requires Ultra2 (LVD) adapter (3X-KZPCA-AA)	3X-SZ15X-AA
	NOTE: Bold face part numbers indicate NEBS qualified. 3.5"AIT and DAT tapes can only be used with AlphaServer TS20/40.

Step 7 - Ethernet Adapters - Mandatory

Adapters require a minimum of Tru64 UNIX V5.1A or OpenVMS V7.1-2 Each adapter uses one PCI slot See Step 12 for additional networking options
NOTE: Ethernet adapter is not required if KZPCM or 3X-DEPVZ-AA is selected as SCSI adapter for StorageWorks shelf

	Maximum # Supported
	Tru64 UNIX	OpenVMS
PCI 1-port 32-bit 10/100-Mb single-channel UTP FE Ethernet adapter (Twisted Pair)	4	4	3X-DE600-AA
PCI to dual-port 10/100 UTP Fast Ethernet adapter (supported under Tru64 UNIX V4.0F and TruClusteä r V1.6)	2	4	3X-DE602-AA
PCI single-port MMF add-on daughter card for 3X-DE602-AA (supported under Tru64 UNIX V4.0F and TruCluster V1.6)	2	2	3X-DE602-FA
PCI 4-port 10/100 Mb Ethernet adapter	1	1	DE504-BA
PCI Combo adapter, includes 10/100 Mbps Ethernet adapter, Ultra2 LVD SCSI adapter, and 2D graphics adapter, no support for multi-head graphics requires OpenVMS V7.1-2 with: DEC-AXPVMS-VMS712_UPDATE-V0300—4.PCSI DEC-AXPVMS-VMS712_GRAPHICS-V0300—4.PCSI DEC-AXPVMS-DNVOSIECO06-V0701—4.PCSI is recommended OpenVMS V7.2-1 requires Tima kit: DEC-AXPVMS-VMS&@!_UPDATE-V0100--4.PCSI Requires Tru64 UNIX V4.0F with NHD2; TruCluster V5.1 support restricted to non-shared buses Tru64 UNIX V5.1 requires Patch Kit 3: T64V51AS0003-20010413.tar	1	1	3X-DEPVZ-AA
Cable for 10BaseT Twisted Pair connection			BN25G-xx
3-meter SCSI cable			BN37A-03
PCI Gigabit Ethernet adapter, SC connectors, MMF - no boot support	4	4	DEGPA-SA
PCI 10/200/1000 UTP Ethernet adapter; requires minimum version Tru64 UNIX V5.0A, Patch kit 2: T64V50AAS0002-20001004.tar	4	4	DEGPA-TA
SC-SC dual Fibre Optic cable, mm, pp xx = length in meters			BN34B-xx

NOTE: Bold face option part numbers indicate NEBS qualified.

Step 8 - System Enclosures - Chassis Rackmount Kit

Step 8a - Chassis Rackmount Kit for NEBS or Standard Cabinet (Non-NEBS)
Chassis Slide Kit included for each AlphaServer TS20/40 system Each Chassis Rackmount Kit supports one system
	Chassis Rackmount Kit for Standard Cabinet	3X-BA61R-SC
	Chassis Rackmount Kit for NEBS Cabinet	3X-BA61R-NC

Step 9 - Cabinets (Standard and NEBS)
NOTE: Contact Compaq CustomSystems for for any cabinet configurations with AlphaServer TS20/40.
Cabinet enclosures require selection of the following items: H9A10 (34U) or H9A15 (41) or NEBS cabinet Power Distribution Unit (PDU); One PDU is included in NEBS cabinet Rear cabinet extender based on cabinet height (H9A10 and H9A15) Cabinet front door based on cabinet height (H9A10 and H9A15) Factory integration Ballast kit if only one system is ordered for the H9A15 cabinet Japan only – 240V cabinet required when using universal shelves (For H9A10 and H9A15 cabinet) Installation of one AlphaServer TS20/40 system in an H9A15 cabinet requires the mandatory selection of a ballast kit for H9A10 and H9A15 cabinet)

General Cabinet Description	67-inch cabinet with 56-inchor 32U of usable vertical space, 120V dual-24A controller, each with 10 NEMA 5-15R outlets, input power plug NEMA L5-30P, Americas, Asia Pacific; includes rear door and top fan tray	H9A10-ZB
	79-inch cabinet with 68.25-inch or 39U of usable vertical space, 5-15R outlets, input power plug NEMA L5-30P, Americas, Asia Pacific; includes rear door and top fan tray	H9A15-ZB
	76-inch cabinet with 70-inch or 38U of usable vertical space, 1900 mm x 600 mm x 600 mm seismic electronic enclosure, 19-inch RETMA mounting rails with non-threaded holes; color Carbon Black; includes rear door and one –48V PDU (3X-H7603-AB)	3X-H9705-AB
	70-inch cabinet with 65-inch or 35U of usable vertical space, 1800 mm x 600 mm x 600 mm seismic electronic enclosure, 19-inch RETMA mounting rails with non-threaded holes; color Carbon Black; includes rear door and one –48V PDU (3X-H7603-AB)	3X-H9705-BB

Rear Cabinet Extender - Optional	Rear cabinet extender, graphite black, for H9A10-ZB cabinets	H9C10-ZE
	Rear cabinet extender, graphite black, for H9A15-ZB cabinets	H9C15-ZE

Front Trim Kit – Required selection of either Front Door Kit or Front Trim Kit	Front trim kit, graphite black, for H9A10-ZE cabinet enclosure	H9C10-ZT
	Front trim kit, graphite black, for H9A15-ZE cabinet enclosure	H9C15-ZT

Cabinet Front Door - Required selection of either Front Door Kit or Front Trim Kit	Front door, graphite black, for H9A10-ZE cabinet enclosure	H9C10-ZF
	Front door, graphite black, for H9A15-ZE cabinet enclosure	H9C15-ZF

Factory Integration - Required	Factory Integration of systems and storage devices assembled and configured in cabinet enclosure in predefined locations	YT-CSSIT-01

Ballast Kit - Required only if one system is ordered for the H9A15 cabinet	Ballast is added to a cabinet at particular locations for specific configurations to meet safety regulations for installation, operation, and service; see Cabinet Configuration Charts.
	Two 35 to 40 lb/16 to 18 kg steel plates	H9C10-MC

Power Distribution Unit (PDU) – For standard cabinet	PDU, NEMA Input, NEMA Outlets, 120V	H7600-AA
	PDU, NEMA Input, NEMA Outlets, 240V	H7600-AB

Power Distribution Unit (PDU) – For NEBS cabinet	Two sections, -48V PDU contains two removable modules rated for 120A. 2U configuration for standard 19.0-inch rackmount and convection cooler. The 48VDC input voltage is distributed to eight separate output connectors	3X-H7603-AB

Step 10 - Storage Adapters/Controllers

NOTE: Refer to the following chart when configuring adapters, shelves, and disks.

AlphaServer TS20/40 Configuration Chart for Storage Adapters
Adapter	Shelf	Disk Drive	Tru64 UNIX	OpenVMS
		External RAID
	DS-SL13R-xx	3R-A3xxx-AA 1.0"Universal	V4.0F – V5.1
		Internal RAID
DS-KZPCC-AC/CE1	BA610-2D (internal RAID)2	3R-A3xxx-AA 1.0" Universal	V5.1/5.1A
3X-KZPCA-AA	BA610-2D DS-SSL14-Rx DS-SL13R-xx 3X-SL13R-TA 3X-SL13R-TB	3R-A0xxx-AA 1.0" Universal 3R-A1xxx-AA 1.0" Universal 3R-A1xxx-AA 1.0" Universal 3R-A0xxx-AA 1.0" Universal 3R-A0xxx-AA 1.0" Universal	V4.0F to V5.1	V7.2-1
3X-DEPVZ-AA	DS-SL13R-xx 3X-SL13R-TA 3x-SL13R-TB	3R-A1xxx-AA 1.0" Universal 3R-A0xxx-AA 1.0" Universal 3R-A0xxx-AA 1.0" Universal	V4.0F with NHD2	V7.2-1
KZPCM-DA	BA36R-xx	DS-RZ1xx-VW, DS-EZxxx-VW	V4.0F to V5.1	V7.2-1
KZPBA-CA	BA36R-xx	DS-RZ1xx-VW, DS-EZxxx-VW	V4.0F to V5.1	V7.2-1
NOTE: Ethernet adapter is not required if 3X-DEPVZ-AA or KZPCM-DA is selected as SCSI adapter for StorageWorks shelf.
RAID Controllers
Adapters	Shelf	Disk Drive	Tru64 UNIX	OpenVMS
KZPAC-AA/CA/CB	BA36R-xx	DS-RZ1xx-VW	V4.0F to V5.1	V7.2-1
DS-KZPCC-CE/AC	BA36R-xx*	3R-A0xxx-AA 1.0" Universal 3R-A1xxx-AA 1.0" Universal	V4.0F only	-

NOTE: * = BA36R-xx shelves require DOC2 I/O module, DS-BA35X-FC; order DS-BA35X-FC as an independent option (will not be factory installed).
DS-KZPCC-AC/CE RAID controllers can be used with universal shelves and drives in TS20/40. Configuration rules are restricted to specific CPU and OS versions: - Tru64 UNIX V5.1 requires Patch Kit 3 (BL17) and Early Release Patch C462.02 Only BA610-2D cage (with Nile Cards Rev –0B) shipped after 1 October 2001 supports internal RAID. Contact Customer Services to replace Nile Cards shipped in BA610-2D disk card cage prior to 1 October 2001 where internal RAID is required.

	Maximum # Supported
	Tru64 UNIX	OpenVMS
PCI 2-port PCI to Ultra3, 64-bit LVD2 SCSI adapter, uses one PCI slot; Includes internal 68-pin and external 68-pin HD connectors; requires BN38C-xx cable to connect adapter to Universal shelf; supports shared JBOD using Models 4314R and 4354R Universal shelves; support restricted to EV68 833-MHz systems only and Tru64 UNIX V5.1A as a minimum.	4	-	3X-KZPEA-DB
PCI 3-port PCI to Ultra2, 64-bit, LVD backplane RAID controller with 64-MB cache (uses one PCI slot); requires connection to DS-SSL14-Rx (maximum seven disks supported per channel) or to DS-SL13R-xx (maximum 14 disks with single channel)	8	-	DS-KZPCC-CE
PCI 1-port PCI to Ultra2, 64-bit, LVD backplane RAID controller with 16-MB cache (uses one PCI slot); requires connection to DS-SSl14Rx (maximum seven disks supported per channel) or to DS-SL13R-xx (maximum 14 disks with single channel)	8	-	DS-KZPCC-AC
PCI to Fibre Channel adapter, 64-bit, single-channel (uses one PCI slot) NOTE: When used in a switched standalone or cluster environment, a maximum of four adapters is supported. When used in an arbitrated loop non-clustered environment, a maximum of one adapter is supported.	See NOTE	See NOTE	DS-KGPSA-CA (168794-B21)
Fibre Channel cable (BNGBX-xx) xx = 02, 05, 15, 30, 50 meters, x = 1 (02 m), 2 (05 m), 3 (15 m), 4 (30 m), 5 (50 m)			234457-B2x

PCI 1-port Ultra2 (LVD) SCSI adapter, 32-bit, single-channel (uses one PCI slot); includes internal 68-pin and external 68-pin HD connectors; requires BN38C-xx cable to connect adapter to Ultra2 shelf; HSZxx RAID controllers not supported. OpenVMS V7.1-2 requires Tima Kit: DEC-AXPVMS-VMS712_UPDATE-V0300—4.PCSI; Tru64 UNIX V4.0F requires Patch Kit2 BL13: DUV40FAS0002-19991116.tar	6	6	3X-KZPCA-AA
68-pin HD male-to-VHDCI male UltraSCSI cable; xx = 02, 03, 05, 10, 20, 25 m			BN38C-xx
PCI combo adapter – See Step 7	1	1	3X-DEPVZ-AA
PCI 2-port UltraSCSI single-ended adapter and 10/100 Mb Ethernet combo adapter (uses one PCI slot); includes internal 68-pin and 50-pin HD connectors and two external 68-pin VHDCI SCSI connectors, requires BN37A-xx cable to connect to single-ended UltraSCSI shelf	4	4	KZPCM-DA
VHDCI male-to-VHDCI male UltraSCSI cable, xx = 02, 2E [2.5], 03, 05, 10, 20 m			BN37A-xx

PCI 1-port UltraSCSI differential adapter (uses one PCI slot); includes external 68-pin HD connector, requires BN38C-xx cable (2 to 25 m) to connect adapter to differential UltraSCSI shelf or RAID controller	5	5	KZPBA-CB
68-pin HD male-to-VHDCI male UltraSCSI cable; xx = 02, 03, 05, 10, 20, 25 m			BN38C-xx

PCI 1-port UltraSCSI RAID controller with 4-MB cache memory (uses one PCI slot), includes RAID Array 230/Plus Subsystem software and documentation kit; includes VHDCI female connector; tape drives not supported; 18.2-GB disk drives not supported, requires BN37A-xx cable (0.3 to 20 m) to connect to single-ended UltraSCSI shelf	4	4	KZPAC-AA

PCI 3-port UltraSCSI RAID controller with 4-MB cache memory (uses one PCI slot), includes RAID Array 230/Plus Subsystem Software and documentation kit; tape drives not supported; 18.2-GB disk drives not supported; SCSI cable required for each active port; requires BN37X-xx cable (.3 to 20 m) to connect to single-ended UltraSCSI shelf, and BN31K-0E for external third port connection	4	4	KZPAC-CA
Same as KZPAC-CA with 8-MB cache memory	4	4	KZPAC-CB
Cache battery backup for KZPAC controller			KZPSC-UB
VHDCI male-to-VHDCI male UltraSCSI cable; xx = 02, 2E [2.5], 03, 05, 10, 20, 25 m NOTE: Manufacturing may substitute BN37A-02 cable for specific cabinet configurations.			BN37A-xx
SCSI cable/bulkhead assembly kit, supports one third-port connection from KZPAC-CA/CB, allows external connection of one third port			BN31K-0E
SCSI cable/bulkhead assembly kit, supports two third-port connections from KZPAC-CA/CB, allows external connection of two third ports			KZPAC-SB

PCI CI adapter for OpenVMS systems only; requires two PCI slots and CI cable for each adapter	-	2	CIPCA-BA
CI cable			BNCIA-xx

PCI DSSI controller for OpenVMS systems only; requires HSDxx controller to connect directly to StorageWorks shelf; requires BC29S-xx cable	-	4	KFPSA-AA
6' DSSI cable for connection to HSD10 installed in BA36R pedestal shelf			BC29S-06
9' DSSI cable for connection to HSD10 installed in BA36R cabinet shelf			BC29S-09

Step 11 - Storage Devices - Optional

UltraSCSI Configuration Rules	UltraSCSI configurations require UltraSCSI components (controllers, adapters, shelves, disks, and cables) UltraSCSI adapters and RAID controllers support UltraSCSI disks at UltraSCSI speeds in UltraSCSI top gun blue shelves (DS-BA356-xx) UltraSCSI and Fast10 drives can be mixed in DS-BA356 top gun blue UltraSCSI shelf; UltraSCSI adapter negotiates maximum transfer speed of drives

UltraSCSI StorageWorks Pedestals	UltraSCSI top gun blue pedestals provide support for UltraSCSI disk drives; pedestals are available in single-bus or split-bus configurations and include a personality module and 180W power supply UltraSCSI shelf supports: seven 3.5" hard disk drives, or one 5.25" device and four 3.5" hard disk drives, or two 5.25" devices and one 3.5" hard disk drive Installation of redundant power supply reduces number of 3.5" drive slots by one
	UltraSCSI single-ended pedestal, single-bus personality module, 180W power supply	DS-BA356-KF
	UltraSCSI single-ended pedestal, split-bus personality module, 180W power supply	DS-BA356-KG
	UltraSCSI pedestal, single-channel differential personality module, 180W power supply	DS-BA356-KH
	180W power supply, includes 120V North American and 240V IEC power cord	DS-BA35X-HH

Tape Drives	Tape drives require single-ended UltraSCSI adapter and country-specific power cord For more information on Compaq tape drives, see http://www.compaq.com/products/storageworks/sitemap.html - tapedrives NOTE: This Web site is available in English only.

AIT Tape Drives	35/70-GB 8 mm AIT LVD tabletop tape drive, North America; requires 3X-KZPCA-AA LVD adapter	216885-001
	35/70-GB 8 mm AIT LVD tabletop tape drive, International; requires 3X-KZPCA-AA LVD adapter	216885-B31
	35/70-GB 8 mm AIT LVD tabletop tape drive, Japan; requires 3X-KZPCA-AA LVD adapter	216885-291
	35/70-GB 8 mm AIT SCSI tabletop tape drive with 120V North American power cord; requires 3X-KZPCA-AA or KZPBA-CA SCSI adapter	388507-001
	35/70-GB 8 mm AIT SCSI tabletop tape drive, International; requires 3X-KZPCA-AA or KZPBA-CA SCSI adapter	388507-B31
	50/100-GB 8 mm AIT SCSI tabletop tape drive with 120V North American power cord; requires 3X-KZPCA-AA Wide Ultra2 (LVD) adapter	157767-001
	50/100-GB 8 mm AIT SCSI tabletop tape drive, International; requires 3X-KZPCA-AA Wide Ultra2 (LVD) adapter	157767-B31
	35/70-GB AIT hot plug LVD Universal tape drive, uses two slots in BA610-2D or 43xxx shelves	3R-A2396-AA
	50/100-GB AIT hot plug LVD Universal tape drive, uses two slots in BA610-2D or 43xxx shelves	3R-A2779-AA

AIT Tape Libraries	SSL2020 AIT library with one AIT 50-GB drive and 20 slots, rackmount, requires 3X-KZPCA-AA	175196-B21
	SSL2020 AIT library with two AIT 50-GB drives and 20 slots, rackmunt, requires 3X-KZPCA-AA	175196-B22
	Tabletop SSL2020 AIT library with one AIT 50-GB drive and 20 slots requires 3X-KZPCA-AA LVD adapter	175196-B21
	Tabletop SSl2020 AIT library with two AIT 50-GB drives and 20 slots, requires 3X-KZPCA-AA LVD adapter	175196-B22

DAT Tape Drives	12/24-GB 4 mm DAT narrow single-ended tabletop SCSI tape drive with 120V North American power cord; requires BN31W-xx SCSI cable and KZPBA-CA or KZPCM-DA adapter	DS-TLZ10-DB
	20/40-GB 4 mm DAT Wide Ultra2 (LVD) tabletop SCSI tape drive with 120V North American power cord; requires 3X-KZPCA-AA Wide Ultra2 (LVD) adapter	157770-001
	20/40-GB 4 mm DAT Wide Ultra2 (LVD) tabletop SCSI tape drive, International; requires 3X-KZPCA-AA Wide Ultra2 (LVD) adapter	157770-B31
	20/40-GB DAT auto loader external, North America	166505-001
	20/40-GB DAT auto loader external, International; requires BN31W-xx SCSI cable and KZPBA-CA or KZPCM-DA adapter	166505-B31
	20/40-GB DAT auto loader external, Japan	166505-291
	20/40-GB DAT DDS4 hot plug LVD Universal tape drive, uses two slots in BA610-2D or 43xxx shelves	3R-A2780-AA

DLT Tape Drives	35/70-GB DLT single-ended tabletop tape drive, requires BN21K-xx SCSI cable and KZPBA-CA or KZPCM-DA adapter	DS-TZ89N-TA
	Tabletop TL881 DLT mini-library with one DLT4000 tape drive; requires HVD KZPBA-CB adapter and SCSI cable	128667-B21
	Tabletop TL881 DLT mini-library with two DLT4000 tape drives; requires HVD KZPBA-CB adapter and SCSI cable	128667-B22
	Tabletop TL891 DLT mini-library with one TZ89N tape drive; requires HVD KZPBA-CB adapter and SCSI cable	120875-B21
	Tabletop TL891 DLT mini-library with two TZ89N tape drives; requires HVD KZPBA-CB adapter and SCSI cable	120875-B22
	Tabletop DLT8000 40/80-GB DLT external tape drive; requires 3X-KZPCA-AA LVD adapter	146197-B21
	Tabletop DLT8000 40/80-GB DLT external tape drive, Japan; requires 3X-KZPCA-AA LVD adapter	146197-291

Removable Media Devices for StorageWorks Shelves	For maximum performance, tape libraries must be configured with Fast Wide Differential (FWD) controllers for tape backup For more information on Compaq tape drives, see http://www.compaq.com/products/storageworks/sitemap.html - tapedrives NOTE: This Web site is available in English only.

AIT Tape Drives	35/70-GB 8 mm AIT SCSI tape drive in 3.5" StorageWorks carrier (BA36R or BA356 shelves)	DS-AIT35-VW
	SSL2020 AIT library with one AIT 50-GB drive and 20 slots, rackmount, LVD (Universal shelves)	175196-B21
	SSL2020 AIT library with two AIT 50-GB drives and 20 slots, rackmount, LVD (Universal shelves)	175196-B22

DAT Tape Drives	12/24-GB 4 mm DAT narrow SCSI tape drive in StorageWorks carrier (BA36R or BA356 shelves)	DS-TLZ10-VA

DLT Tape Drives	40/80-GB DLT8000 tape drive in StorageWorks carrier (BA36R or BA356 shelves)	DS-TZ90N-VW
	20/40-GB DLT single-ended tape drive in StorageWorks carrier (BA36R or BA356 shelves)	TZ88N-VA
	35/70-GB DLT single-ended tape drive in StorageWorks carrier (BA36R or BA356 shelves)	DS-TZ89N-VW
	DLT mini-library expansion unit with bar code reader, 16 cartridges, wide differential SCSI robotic controller with 68-pin HD female SCSI connector, universal mounting rails (Metric/RETMA)	DS-TL890-NE

DLT Tape Libraries	MSL5026DLX or MSL5026Sl, DLT/SDL tabletop library, 0 drives; all MSL 5026 libraries are supported with 3X-DEPVZ-AA and 3X-KZPCA-AA adapters	231838-B21
	MSL5026DLX, DLT tabletop library with one 40/80-GB DLT tape drive, LVD	231821-B21
	MSL5026DLX, DLT tabletop library with two 40/80-GB DLT tape drive, LVD	231821-B22
	MSL5026DLX or MSL5026SL, DLT/SDLT rackmount library, 0 drives	231979-B21
	MSL5026DLX, DLT rackmount library with one 40/80-GB DLT tape drives, LVD	231891-B21
	MSL5026DLX, DLT rackmount library with two 40/80-GB DLT tape drives, LVD	231891-B22
	MSL5026SL, SDLT tabletop library with one 110/220-GB SDLT tape drive, LVD	231822-B21
	MSL5026SL, SDLT tabletop library with two 110/220-GB SDLT tape drive, LVD	231822-B22
	MSL5026SL, SDLT rackmount library with one 110/220-GB DLT tape drives, LVD	231892-B21
	MSL5026SL, SDLT rackmount library with two 110/220-GB DLT tape drives, LVD	2311892-B22
	ESL198 DLX Enterprise tape libraries with two 40/80-GB tape drives (161265-B24/-B25/-B26/-B27/-28 for 8, 10, 12, 14, or 16 tape drives); requires KZPBA-CB	194993-B22
	TL891DLX DLT tabletop library with one DLT tape drive, LVD	157300-B21
	TL891DLX DLT tabletop library with two DLT tape drive, LVD	157300-B22
	TL891DLX DLT rackmount library with one DLT tape drive, LVD	157305-B21
	TL891DLX DLT rackmount library with two DLT tape drive, LVD	157305-B22
	Rackmount TL881 DLT mini-library with one DLT4000 tape drive; requires KZPBA-CB adapter	128668-B21
	Rackmount TL881 DLT mini-library with on DLT4000 tape drive; requires KZPBA-CB adapter	128668-B22

BA370 Rackmount Enclosure	Mandatory rear cabinet extender ordered for systems installed in M-series cabinets (H9A10 and H9A15) allows two BA370 enclosures to be installed front to back in cabinet
	Host adapter, RAID Array controller, ACS firmware, cache battery, cables, platform-specific Solutions Software Kit, and disk drives must be ordered separately
	BA370 front mount rackmount enclosure with five 180W power supplies, includes RETMA rackmount kit; first BA370 enclosure must be front mounted in cabinet, 20U height	2T-BA370-AS
	BA370 rear mount rackmount enclosure with five 180W power supplies, includes RETMA rackmount kit; second BA370 enclosure must be rear mounted in cabinet, 20U height	2T-BA370-AR

External Storage Solutions/Controllers	Modular Array 8000 Fibre Channel RAID storage solution, 60 Hz; includes one HSG80 controller with 256-MB cache, one M2200 controller shelf, three dual-bus disk shelves, two I/O ports, two power supplies	175992-B21 DS-SWXEB-CA
	Modular Array 8000 Fibre Channel RAID storage solution, 50 Hz; includes one HSG80 controller with 256-MB cache, one M2200 controller shelf, three dual-bus disk shelves, two I/O ports, two power supplies	175992-B22 DS-SWXEB-CB