HP AlphaServer GS1280 Models 8 and 16 - North America/U.S. QuickSpecs

Overview

HP AlphaServer GS1280 Models 8 and 16

1.
Cable/DSL HUB

2.
PCI/PCI-X I/O Expansion Drawer (Optional)

3.
PCI/PCI-X I/O Master Drawer (Mandatory Option)

4.
System Building Block Drawer (Model 8 Includes 1 drawer, Model 16 includes 2 drawers)

5.
48-volt DC Power shelves, 3 power supplies per shelf (Model 8 includes 1 shelf, Model 16 includes 2 shelves)

6.
AC input controller(s) (Mandatory Option)

At A Glance

AlphaServer GS1280 systems

1150-MHz Alpha 21364 processors supported (up to 16)
Advanced on-chip memory controllers and switch logic capable of providing 12.3-GB/s of memory bandwidth per processor
Choice of memory options; up to 4-GB of RDRAM memory per CPU supported (128-GB total for a 16P system)
Redundant features providing maximum uptime - N+1 Voltage Regulator Modules (VRMs); hot- plug redundant power supplies; cooling provided by hot-plug redundant system fans
Optional RAID memory support
Standard I/O Drawer with 11 configurable PCI/PCI-X slots and one AGP slot; hot-swap power supplies; two drive bays with Ultra3 SCSI support; CD-RW drive
High Performance I/O Drawer with eight PCI/PCI-X slots @ 133 MHz; hot-swap power supplies
Enhanced reliability with ECC-protected memory, processor cache, and system data paths
Tru64 UNIX or OpenVMS factory installed software (FIS); optional high availability support with Tru64 UNIX and OpenVMS cluster solutions
Product warranty, 1-year hardware, on-site next business day and 90-day software, telephone support delivered by HP Services
Consult the HP Customer Support Center at 1-800-345-1518 for details

Standard Features

Processor	2 to 16 Alpha 21364 1150-MHz CPUs (in multiples of two)

Cache Memory	1.75-MB ECC L2 on-chip cache per CPU

Architecture	Glue-less processor-to-processor multiprocessor architecture constructed from a set of basic components: System Building Block Drawers CPU Building Block Modules I/O Expansion Building Block Drawers

CPUs, Memory, and I/O slots	GS1280 Model 8	GS1280 Model 16
Maximum CPUs supported	8	16
Maximum memory supported	Up to 64 GB	Up to 128 GB
Maximum PCI/PCI-X slots supported	87	176
Maximum AGP slots supported	8	16

Interfaces	USB	One Dual USB port per System Building Block Drawer
	Server Management	One MBM Server Management LAN Connection per System Building Block Drawer
	Serial	One MBM serial connection per System Building Block Drawer

Form Factor	41U Rack

Boot/Diagnostic Devices	CD-R	One slim line multi-bay 24X/10X/24X CD-RW in Master I/O Drawer
	Hard Drives	Choice of 18.2/36.4/72.8/146-GB SCSI disk drives in Master I/O Drawer

Power Supplies	3-phase power subsystem with power cords, redundant 48 Vdc hot swap power supplies included Cabinet configurations require 3-phase power distribution units, North America or an International variant

OS Support	AlphaServer GS1280 Tru64 UNIX systems include pre-installed software, Base license, Unlimited User license, Server Extension license, Internet Express, and Secure Web Server
	AlphaServer GS1280 OpenVMS systems include pre-installed software, Base license with System Manager license and Enterprise Integration Server License Package for OpenVMS
	Minimum OS support - Tru64 UNIX V5.1B + IPK or OpenVMS V7.3-1 plus Update Kit

Service and Support	Protected by HP Services including a 1-year on-site hardware warranty. Training, consulting, network integration, software support, comprehensive system maintenance and guaranteed uptime services are also available for customers requiring higher levels of service and support.
	NOTE: For the complete list of supported options, refer to the following Web page: http://h18002.www1.hp.com/alphaserver/options/asgs1280/asgs1280_options.html

Systems

Step 1 - Assess Application Requirements

Selection of system components must be made in the context of total application requirements. Although the configuration of system components must be done in steps (for example, base system, CPUs, memories, etc.), these steps should not be done in isolation.
The order in which requirements are assessed is also important, since one requirement may impact others. Before proceeding, it would be useful to assess the total application requirements in the following order:
What level of availability is required?
- If no single points of failure are allowed, then the solution should be configured as a multi-system cluster.
- If access to specific devices must be assured, consider redundant adapters, RAID, redundant I/O Expansion Drawers, etc.
What overall capacities are required in terms of performance, memory capacity, and disk storage?
How should the system be configured to optimize performance?
- In most cases, optimum performance is achieved if the system resources (CPUs, memory and I/O adapters) are balanced across the System Building Blocks in the system.
- Memory should be configured according to application guidelines listed in Step 4.
What are the near-term system expansion needs?

NOTE: Most configuration steps require that the above data be considered in whole or in part. Be sure to execute each step in the context of the total application requirements.

Configuration Requirements for GS1280 Partitions

Configuring partitions requires some attention to detail with respect to minimum requirements for option selection, population, and option placement.

A single AlphaServer GS1280 can be divided into logical hardware partitions, as small as two processors, each running an instance of Tru64 UNIX or an instance of OpenVMS. Each partition is allocated its own dedicated "shared-nothing" set of hardware resources: CPU module(s), memory module(s), and I/O.
Each hardware partition is viewed as a unique node, from a system point-of-view, with its own instance of Tru64 UNIX or OpenVMS operating system and application software, independent system console, and error log.
Partition boundaries cannot separate two CPUs on the same Dual CPU Building Block Module.
Supported option rules apply for maximum configurations of each AlphaServer GS1280 system partition. Care must be exercised to ensure that any planned reconfiguration of hardware partitions will not violate option support rules.
Multiple hard partitions within a GS1280 server may not provide complete hardware failure isolation across hard partitions. Hard partitions at the 8P Building Block Drawer level within the server do provide hardware failure isolation.

All systems require the following minimum firmware revisions to run hard partitions:

Minimum Firmware console rev: V6.5-8
Tru64 UNIX: V5.1b + Patch kit - T64V51BB22AS0002-20030415.tar
OpenVMS: V7.3-1 + TIMA Kits
DEC-AVPVMS-VMS731_PARTITIONING-V0199—4.PCSI and AVPVMS-VMS731_PARTITIONING-V0100_cVRLET and AVPVMS-VMS731_PARTITIONING-V0100_SUBFORM
available at http://h18003.www1.hp.com/alphaserver/gs1280/gs1280_tech.html

NOTE: Additional partitioning information is available at
http://h18003.www1.hp.com/alphaserver/gs1280/gs1280_tech.html

Minimum Hardware Required per AlphaServer GS1280 Hardware Partition

One AlphaServer GS1280, Dual CPU Building Block
Two memory modules, one for each CPU
One I/O Master Building Block Drawer and one I/O cable (see Step 5a)
One system disk drive

AlphaServer GS1280 systems are normally configured according to standard module placement rules, and are shipped with one copy of the operating system installed at the factory (Tru64 UNIX or OpenVMS). However, systems with hardware partitions offer hardware and software configuration flexibility. Factory integration services (VIS) are recommended to enable custom module configuration and factory installation of multiple copies of the operating system on hardware- partitioned systems.

Each partition must have a minimum amount of memory: 16 MB per each CPU in the partition + the minimum supported by the O/S.
For example: On a GS1280 Model 16 divided into two hard partitions, each with one System Building Block per each hard partition: 8 x 16 MB + O/S memory = 128 MB + O/S memory
Each CPU that has I/O attached to it must have memory

System Software Required for AlphaServer GS1280 Hardware Partition Support - Software Licensing for Hardware Partitions

Base systems include an operating system license (Tru64 UNIX or OpenVMS) that licenses all hardware partitions up to the physical limit of the base system package: e.g., four hardware partitions for Model 8 systems, eight partitions for Model 16 systems.
User and capacity-based licensing is unaffected by hardware partitions. Examples:
If a product is licensed for 200 concurrent users, these users can be split among the partitions, but cannot exceed 200
total users.
If users have an enterprise capacity license for a product, that license can be loaded into the license databases on each of the hardware partitions.

Licensing AlphaServer GS1280 Systems for Both OpenVMS and Tru64 UNIX

Systems require licenses for both OpenVMS and Tru64 UNIX operating systems, either for dual O/S boot of the entire system or for different operating systems in separate hard partitions. One operating system license is included in the base system and the second is added as a line item. The second operating system license upgrade would be added to the order using the following part numbers. Order appropriate media and documentation kits from Step 16.
- OpenVMS software upgrade for GS1280	QB-63PAQ-AC
- Tru64 UNIX software upgrade for GS1280	QB-595AN-AB
Only those SMP processors intended for use with the second operating system must be similarly licensed. Use the following license-only part numbers to add an SMP license for any CPUs intended for use with the second operating system:
- OpenVMS Alpha dual SMP license for GS1280	QL-MT1A9-6T
- Tru64 UNIX Alpha dual SMP license for GS1280	QL-MT4A9-6T
The order of licensing is not important, but the following examples are similarly constructed for clarity. The configuration starts with a Tru64 UNIX base system part number and the addition of OpenVMS licenses.
Example 1: 16-CPU GS1280 system in which all processors are licensed for both OpenVMS and Tru64 UNIX: Base system order would include one DA-1280A-BA and eight 3X-KN72C-AB dual CPU Building Blocks Add one QB-63PAQ-AC OpenVMS Software Upgrade and eight QL-MT1A9-6T OpenVMS Alpha dual SMP licenses
Example 2: 16-CPU GS1280 system in which all the processors are licensed for Tru64 UNIX and eight processors are also licensed for OpenVMS: Base system order would include one DA-1280A-BA and eight 3X-KN72C-AB dual CPU Building Blocks Add one QB-63PAQ-AC OpenVMS software upgrade and four QL-MT1A9-6T OpenVMS Alpha dual SMP licenses User and capacity-based licenses would be added for the second operating system environment as though it were a standalone system.
Example 3: 16-CPU GS1280 system in which eight processors are licensed for Tru64 UNIX and eight processors are also licensed for OpenVMS: Base system order would include one DA-1280A-BA and four 3X-KN72C-AB dual CPU Building Blocks Add one QB-63PAQ-AC OpenVMS software upgrade and four 3X-KN72C-AC dual CPU OpenVMS Alpha Building Blocks User and capacity-based licenses would be added for the second operating system environment as though it were a standalone system.

System Ordering Requirements:

Certain system components or services are either required for normal operation or are recommended for best system performance and/or operation. This document uses the following definitions to specify these options: Mandatory purchase: The system cannot function without this option or service - the option or service must be ordered with the system. Required to function: This option or service is needed to support a working system - the option or service must be ordered with the system or be available onsite. Recommended: System performance or function will be enhanced if this option or service is ordered.

AlphaServer GS1280 Model 8 and Model 16 systems require selection of the following items:

Mandatory Purchases:

One Base System (Step 2)
One or two CPU Building Block Modules (Step 3)
Memory option(s) (Step 4)
One Master I/O Drawer (Step 5a)
One system disk drive (Step 5b)
Power Distribution Unit(s) (Step 6b)
Ethernet Adapter (Step 12a)

Optional Purchases:

Software media and documentation only required for first system onsite
Country-specific keyboard and mouse only if required (Step 12)

Recommended Services:

HP Care Pack Service Package
Installations and/or Installation and Start-up Services
VIS Services

System Management Hardware/Software Requirements

NOTE: The following Server Management requirements only apply to customers who prefer to use the AMS or AMU Server Management software. The AlphaServer Management Station (AMS) provides the highest level of server management for a single or multi-platform environment. The AMS provides for a local or remote Web accessible central point of management and control for a multiple ES47/ES80/GS1280 environment. The AlphaServer Management Station software requires the following hardware in order to operate: Tru64 UNIX platform with 1-GB memory, 1-GB disk space, and two network interface cards running Tru64 UNIX V5.1B Intel IA-32 platform running Linux, 500-MHz CPU or faster, 1-GB memory, 10-GB disk space The AlphaServer Management Utility (AMU) provides the next highest level of server management. The AMU is a GUI based application that provides a sophisticated, yet user-friendly graphics interface to monitor and manage a single ES47/ES80/GS1280 system. From this application, the user can monitor the status of the platform, and provide a significant level of control of the platform. The AMU is a Web-based utility, which allows a user local and remote access from a browser. The AlphaServer Management Utility requires one of the following hardware platforms in order to operate: Intel IA-32 platform running Windows 2000, 500-MHz CPU or faster, 1-GB memory, 10-GB disk space Intel IA-32 platform running Linux, 500-MHz CPU or faster, 1-GB memory, 10-GB disk space Tru64 UNIX platform running V5.1B or later, 1-GB memory, 10-GB disk space OpenVMS platform running V7.3-1 or later, 1-GB memory, 10-GB disk space Both the AMS and AMU Software require Internet Explorer 5 or later or Netscape 6 Downloadable AMS/AMU kits and instructions available at: http://ftp.digital.com/pub/Digital/Alpha/firmware/interim/ams/index.html

Step 2 - Select base system

Mandatory selection of at least one Base System required
Base Systems Include: Model 8 systems include one System Building Block Drawer; one 41U rack with Cable/DSL Hub; and one power shelf with three power supplies Model 16 systems include two System Building Block Drawers; one 41U rack with Cable/DSL Hub; and two power shelves with three power supplies each Mandatory ordering of an I/O Expansion Drawer required for each system ordered (See Step 5a) NOTE: Base systems do not include CPUs or memory (see Steps 3 and 4)

AlphaServer GS1280 Base Systems
Model	OS	System Building Block Drawers Included	Total CPUs Supported (See Step 3)	41U Rack(s)	Order No.
Model 8	Tru64 UNIX	1	8	One Included	DA-1280A-AA
Model 8	OpenVMS	1	8	One Included	DY-1280A-AA
Model 16	Tru64 UNIX	2	16	One Included	DA-1280A-BA
Model 16	OpenVMS	2	16	One Included	DY-1280A-BA

Step 3 - CPU Building Block Modules - Mandatory

GS1280 Model 8 supports 2, 4, 6, and 8 processor configurations (1, 2, 3, or 4 CPU Building Block Modules)
Mandatory selection of at least one CPU Building Block Module required per GS1280 Model 8 system
Optional selection of up to 3 additional CPU Building Block Modules or up to 3 additional CoD CPU Building Block Modules
GS1280 Model 16 supports 4, 8, 12, and 16 processor configurations (2, 4, 6, or 8 CPU Building Block Modules)
Mandatory selection of at least two CPU Building Block Modules required per GS1280 Model 16 system
Optional selection of an additional 2, 4, or 6 CPU Building Block Modules or an additional 2, 4, or 6 CoD CPU Building Block Modules
Both CPU Building Block Module and CoD CPU Building Bock Module include two Alpha 21364 CPUs
Selection of CPU Building Block Module or CoD CPU Building Block Module type (Tru64 UNIX or OpenVMS) must match base system operating system selected in Step 2

CPU Building Block Modules	AlphaServer GS1280 Dual CPU Building Block Module, 2xEV7 CPUs, 1150 MHz, Tru64 UNIX SMP License	3X-KN72C-AB
	AlphaServer GS1280 Dual CPU Building Block Module, 2xEV7 CPUs, 1150 MHz, OpenVMS SMP License	3X-KN72C-AC

Capacity on Demand (CoD) CPU Building Block Modules	AlphaServer GS1280 Systems can be configured with optional Capacity on Demand (CoD) CPUs for future capacity expansion. The total number of CPU Building Block Modules plus CoD CPU Building Bock Modules must adhere to the limits outlined above for GS1280 Model 8 and Model 16 systems. Memory is NOT included with CoD CPUs but must be ordered. See Step 4 for memory configuration requirements. NOTE: An inactive CoD CPU cannot be connected to an external I/O Expansion Drawer.
	AlphaServer GS1280 CoD Dual CPU Building Block Module, 1150 MHz, Tru64 UNIX SMP License	3X-KN72C-CB
	AlphaServer GS1280 CoD Dual CPU Building Block Module, 1150 MHz, OpenVMS SMP License	3X-KN72C-CC

Options

Step 4 - Select Memory Options

Memory Configuration Guidelines
Memory options should be selected in the context of the application's sensitivity to memory bandwidth and future memory expansion. This will determine the number of memory options to order. The total capacity required will determine the size of the options to be ordered.
Mandatory selection of at least two memory options per CPU Building Block Module ordered in Step 3. Each GS1280 Model 8 system can support up to 16 memory options (four RIMMs each) and up to 16 memory RAID options (one RIMM each) for a total of 80 RIMMs when configured with 8 CPUs. Each GS1280 Model 16 system can support up to 32 memory options and up to 32 memory RAID options for a total of 160 RIMMs when configured with 16 CPUs. Each CPU has two memory controllers - Each memory controller can support four RIMMs (one memory option) and a fifth RIMM slot for redundancy (RAID option). If populated, the two memory controllers per CPU must contain the same size RIMMs. Order one RAID option (one RIMM) per memory option if desired. If RAID memory is selected, the number of RAID options must equal the number of memory options selected. The following examples illustrate different ways of configuring a GS1280 Model 8 with four CPUs with a total of 4-GB of memory.

		CPU Building Block Module #1				CPU Building Block Module #2
Case	Memory Option	CPU 1		CPU 2		CPU 3		CPU 4
Case	Memory Option	Controller 1	Controller 2	Controller 1	Controller 2	Controller 1	Controller 2	Controller 1	Controller 2
A	3X-MS7AB-AA (4x128 MB)	1	1	1	1	1	1	1	1
B	3X-MS7AB-BA (4x256 MB)	1	-	1	-	1	-	1	-

Memory Application Examples

Configuring memory is a compromise between cost, total memory capacity, and memory bandwidth requirements. The behavior of the application must be used to define the most-desired configuration. Some applications are sensitive to memory capacity, some are sensitive to memory bandwidth, some are sensitive to neither. If actual application measurements are not available, the following may be used as guidelines: Large memory (VLM) applications, in which large amounts of memory can substantially reduce I/O throughput, may be optimized for total memory capacity and future capacity growth. In VLM applications, the right balance might be one memory option per CPU. (Case B) Typical commercial applications, such as transaction processing (OLTP) and multi-user timesharing, usually operate efficiently from cache and may not be materially affected by memory bandwidth. Memory configuration is a balance between memory bandwidth and future capacity growth. It is advisable to match the number of options to the number of CPUs. (Case B) Data mining can benefit from additional memory bandwidth. It is best to match the number of memory base modules to the number of CPUs. (Case A) The most demanding high-performance technical applications achieve a performance level that is directly proportional to memory bandwidth. In these cases, configure two memory options per CPU. (Case A)
	512-MB RDRAM Memory (4x128) Option	3X-MS7AB-AA
	512-MB RDRAM Memory (1x128) RAID Option	3X-MS7AB-AC
	1-GB RDRAM Memory (4x256) Option	3X-MS7AB-BA
	1-GB RDRAM Memory (1x256) RAID Option	3X-MS7AB-BC
	2-GB RDRAM Memory (4x512) Option	3X-MS7AB-CA
	2-GB RDRAM Memory (1x512) RAID Option	3X-MS7AB-CC
	4-GB RDRAM Memory (4x1024) Option	3X-MS7AB-DA
	4-GB RDRAM Memory (1x1024) RAID Option	3X-MS7AB-DC
	VRM/Bracket Kit for 4-GB RDRAM Memory Option	3X-H7188-AA
	NOTE: Order one VRM/Bracket Kit for each CPU Building Block module that will contain any 3X-MS7AB-DA options

Step 5 - Configure Packaging Options

Step 5a - System I/O Expansion

I/O Configuration Guidelines:

Each AlphaServer GS1280 system requires one I/O Master Building Block Drawer per system or hard partition. Additional I/O Building Block Drawers are optional. Each CPU in a GS1280 System Building Block Drawer can provide one I/O connection to an I/O Drawer. Each AlphaServer GS1280 system Model 8 supports up to 8 I/O connections per system or hard partition. Each AlphaServer GS1280 system Model 16 supports up to 16 I/O connections per system or hard partition. Either a Standard I/O Drawer or High Performance I/O Drawer can be used as the Master or for additional expansion. Any combination of drawers is supported up to the I/O connection limit. The Standard I/O Drawer requires one I/O connection The High Performance I/O Drawer requires one and optionally up to four connections Example GS1280 Model 8: 4 Standard I/O Drawers, 1 I/O connection each = 4 connections 2 High Performance I/O Drawers, 2 I/O connections each = 4 connections Total I/O connections = 8 connections Each Master I/O Building Block Drawer has a Combination USB/Ultra3 SCSI Adapter, in one slot, which provides an Ultra3 SCSI connection for two disks and a CD-RW device in the drawer; plus a USB connection for keyboard, mouse, and monitor. If the final system configuration does not require these I/O devices, the Combination USB/Ultra3 SCSI Adapter may be removed and replaced with these alternatives: Disk Access for System Boot - External storage access or network boot can be used in place of the disk storage internal to the I/O Drawer. Software Load - Software can be loaded over the network from a disk on another system or directly from a CD reader attached to another system by using remote mount. User I/O - User access via a network connection can be used in place of the direct connection via the USB port.
Standard I/O Drawer Each Standard I/O Drawer requires one I/O connection to a CPU in a GS1280 System Building Block Drawer Standard I/O Expansion Drawers contain 11 PCI/PCI-X slots and one AGP slot; and an N+1 redundant power system Standard I/O Master Drawers consist of a Standard I/O Drawer plus a combination USB/Ultra3 SCSI adapter (occupies one PCI slot), a CD-RW drive, and two Ultra3 SCSI hot-plug disk drive bays (disk drives are NOT included, they must be ordered separately) Standard I/O Drawers are connected to a GS1280 System Building Block Drawer utilizing a 3X-BNPSA-xx cable

Master and Expansion Standard I/O Building Block Drawer slot specifications:
Port #	Slot #	Maximum Bus Speed	Signal Voltage	Number of Devices Supported
0	1	33 MHz	3.3V	1 – 33 MHz PCI
	2	33 MHz	5.0V	1 - CIPCA-BA or 2 - 3X- KZPBA-CC (NOTE: No mixing of options within 5V slots)
	3	33 MHz	5.0V
1	1	133 MHz	3.3V	2 – 66 or 33 MHz PCI or 2 – 66 MHz PCI-X or 1(1) – 133 MHz PCI-X
1	2	133 MHz	3.3V
2	1	66 MHz	3.3V	6 – 33 MHz PCI or 3(2) – 66 MHz PCI or 2 – 66 MHz PCI- X
	2	66 MHz	3.3V
	3	66 MHz	3.3V
	4	66 MHz	3.3V
	5	66 MHz	3.3V
	6	66 MHz	3.3V
3	1	2X AGP	1.5V	1 – 1X or 2X AGP
NOTE: (1) Two 133-MHz PCI-X devices are supported in Port 1, slots 1 and 2; they will however operate at 100 MHz. (2) Five 66-MHz PCI devices are supported in Port 2, slots 1-5; they will however operate at 50 MHz.

Modules designed for 5.0V signaling and 33-MHz bus speed can only operate in Port 0 - slots 2 and 3 (reserved for 3X-KZPBA-CC or CIPCA)
Modules designed for 3.3V signaling and 66-MHz bus speed cannot operate in Port 0 - slots 2 and 3
Universal PCI modules capable of operating at 66 MHz will operate at 33 MHz when placed in a 33-MHz slot

High Performance I/O Drawer

Each High Performance I/O Drawer requires one and optionally up to four I/O connections to CPUs (one I/O connection per CPU) in a GS1280 System Building Block Drawer.
High Performance I/O Expansion Drawers contain eight PCI/PCI-X slots and one N+1 redundant power system. The base drawer includes one I/O module to drive two PCI/PCI-X slots. Up to three additional I/O modules may be added as options; each drives two additional PCI/PCI-X slots.
One High Performance I/O Drawer can be used by separate systems or hard partitions. Each of the four I/O Connections (and two associated PCI-X slots) in the High Performance I/O Drawer can be independently controlled - power on/off - from separate hard partitions or separate systems. That means one High Performance Drawer can be shared by up to four hard partitions or systems.
High Performance I/O Master Drawers consist of a High Performance I/O Drawer plus a combination USB/SCSI adapter (occupies one PCI-X slot), a CD-RW drive, and two Ultra3 SCSI hot-plug disk drive bays (disk drives are NOT included, they must be ordered separately)
High Performance I/O Drawers are connected to a GS1280 System Building Block Drawer utilizing one to four
3X-BNPSA-xx cable(s)

The following chart details the High Performance I/O Drawer slots:
Port #	Slot #	Maximum Bus Speed	Signal Voltage	Number of Devices Supported
0	Slot 1, 2	133 MHz	3.3V	2 - 133 MHz PCI-X
1	Slot 1, 2	133 MHz	3.3V	2 - 133 MHz PCI-X
2	Slot 1, 2	133 MHz	3.3V	2 - 133 MHz PCI-X
3	Slot 1, 2	133 MHz	3.3V	2 - 133 MHz PCI-X
NOTE: 5V and AGP options are not supported

	Standard I/O Master Drawer	3X-BA70A-AA
	Standard I/O Expansion Drawer	3X-BA70A-BA
	High Performance I/O Master Drawer	3X-BA70B-AA
	High Performance I/O Expansion Drawer	3X-BA70B-BA
	Add-in I/O Module for High Performance I/O Drawers. Each module supports two PCI/PCI-X slots. Up to three modules may be added to the base High Performance I/O Drawer.	3X-KFMHA-AA
	I/O 3.3-meter cable for connection between a GS1280 System Building Block Drawer and I/O Building Block Drawers mounted in a system cabinet or adjacent expansion cabinet; select one cable for each I/O drawer ordered and one cable per Add-in I/O Module (3X-KFMHA-AA) if ordered.	3X-BNPSA-04
	I/O 4.5-meter cable for connection spanning one or two cabinets between a GS1280 System Building Block Drawer and I/O Building Block Drawer mounted in optional 3X-H9A45-ZA cabinet (see Step 8); select one cable for each I/O drawer ordered and one cable per Add-in I/O Module (3X-KFMHA-AA) if ordered.	3X-BNPSA-05
	I/O 6.0-meter cable for connection spanning three cabinets between a GS1280 System Building Block Drawer and I/O Building Block Drawer mounted in optional 3X-H9A45-ZA cabinet (see Step 8); select one cable for each I/O drawer ordered and one cable per Add-in I/O Module (3X-KFMHA-AA) if ordered.	3X-BNPSA-06

Step 5b - Select System Disk

Selection of at least one system disk drive is mandatory for each GS1280 system ordered Each Master I/O Drawer supports up to two internal hard disk drives. NOTE: Integrated Ultra3 SCSI controller for internal disk drives and cabling included with each Master I/O Drawer.
	36.4-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive	3R-A3838-AA
	72.8-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive	3R-A3839-AA
	146-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive	3R-A3841-AA
	18.2-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive	3R-A3848-AA
	36.4-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive	3R-A3849-AA
	72.8-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive	3R-A3851-AA

Step 6 - Internal System Expansion

AlphaServer GS1280 Model 8 and Model 16 can support optional configurations shown below

AlphaServer GS1280 Model 8 - Internal System Expansion Options

AlphaServer GS1280 Model 16 - Internal System Expansion Options

Step 7 - Power Distribution Units/Power Options

Power Distribution Units	Power supplies included with Model 8 and Model 16 systems can support all combinations of CPUs, memory, and I/O that can be configured within the system boxes and include N+1 power redundancy Mandatory selection of one 30A or 32A Power Distribution Unit (AC power option) required for each GS1280 Model 8 system ordered Mandatory selection of two 30A or 32A Power Distribution Units (AC power option) required for each GS1280 Model 16 system ordered (does not provide dual AC functionality)
	120/208V Y or 200V, 30A NEMA L21-30P plug 3 x C19 outlets plus 24 x C13 outlets	3X-H7606-AA
	380/415V Y, IEC 309 32A 6h/230/400~ plug 3 x C19 outlets plus 24 x C13 outlets	3X-H7606-AB

Dual AC Power Options for GS1280 Model 8 and Model 16 Systems	A dual AC power option provides the capability to connect to two separate AC feeds: a primary AC feed and a secondary AC feed. The feeds can be direct from the power utility, or they can be a combination of utility feeds and UPS or generator feeds. The preferred (primary) feed is determined by the user. In the event of failure of the primary feed, the system will automatically transfer the load to the secondary feed without power interruption. - The dual AC power options can be factory configured or installed as a field upgrade. - The dual AC power option for the GS1280 Model 8 requires one additional Geography-specific PDU be ordered; the Model 16 Dual AC option requires two additional PDUs. The dual AC options do NOT include Power Distribution Units (PDUs). They must be ordered separately (3X-H7606-AA/AB - see above). There are two dual AC options available for the GS1280, one for the Model 8 and one for the Model 16. The dual-AC power option for GS1280 Model 8 systems consists of the following component types: - One power shelf with three power regulators (N+1) - One dual AC assembly with two cables - The dual AC assemblies for the Model 8 can be mounted in a single cabinet configuration The dual AC power option for GS1280 Model 16 systems consists of the following component types: - Two power shelves with three power regulators each (N+1) - Two dual AC assemblies with four cables - The dual AC assemblies for the Model 16 requires that a second cabinet (3X-H9A45-ZA Expansion Cabinet) be mounted adjacent to the system power cabinet – see Step 8 for ordering external expansion cabinet
	Dual AC option for use with AlphaServer GS1280 Model 8 systems	3X-H7514-AC
	Dual AC option for use with AlphaServer GS1280 Model 16 systems	3X-H7514-AB


AlphaServer GS1280 Model 8 with Dual AC Option


AlphaServer GS1280 Model 16 with Dual AC Option

Step 8 - External Cabinet Expansion

	Additional I/O Expansion Drawers and StorageWorks Shelves can be installed in optional 3X-H9A45-ZA Expansion Cabinets. 3X-H9A45-ZA Expansion Cabinets can be configured to hold alI I/O Expansion Drawers (up to eight for a Model 16 system); all StorageWorks Model 4314R and 4354R Shelves (up to 12); or combination of StorageWorks Shelves and I/O Expansion Drawers. Mandatory selection of one Power Distribution Unit (AC power option) required per cabinet selected
	NOTE: Not required if dual AC power was selected in Step 7 for Model 16 system.
	External Expansion Cabinet	3X-H9A45-ZA
	120/208V Y or 200V, NEMA L21-30P plug 3 x C19 outlets plus 24 x C13 outlets	3X-H7606-AA
	380/415V Y, IEC 309 32A 6h/230/400~ plug 3 x C19 outlets plus 24 x C13 outlets	3X-H7606-AB


	AlphaServer GS1280 Model 8 or Model 16 External Cabinet Expansion

Step 9 - Storage Adapters/Controllers

	Maximum # Supported
	Tru64 UNIX			OpenVMS
	Per Model 8 System	Per Model 16 System	Per External I/O Drawer	Per Model 8 System	Per Model 16 System	Per External I/O Drawer	Slot Type
SCSI -- NOTE: Maximum storage controllers per systems, all types - Tru64 UNIX: 32, OpenVMS: 26
PCI 2-port Ultra3 (LVD) SCSI adapter, 64-bit/66-MHz dual-channel (uses one PCI slot); includes internal 68-pin and external 68-pin VHDCI connectors; requires 3X-BC56J-xx cable to connect adapter to DS-SL13R-Bx shelf. NOTE: Dual bus/shelf and single/bus shelf (DS-SL13R-xx) are supported. Restrictions: HSZxx RAID controllers not supported; SDLT tape drives not supported; Tru64 UNIX requires graphics adapter to run console utilities (RUN BIOS); OpenVMS not supported in shared bus configurations; maximum cable length 12 meters.	32	32	8	12	12	8	3.3V	3X-KZPEA-DB
PCI 1-port Ultra2 (LVD) SCSI adapter, 32-bit/33-MHz, single-channel (uses one PCI slot); includes internal 68-pin and external 68-pin HD connectors; order BN38C-xx cable to connect adapter to Ultra3 shelf, or order VHDCI converter (BN38E-0B) for use with included cable. HSZxx RAID controllers not supported. No support for shared SCSI.	8	8	8	8	8	8	3.3V	3X-KZPCA-AA
Ultra160 cable, VHDCI to VHDCI xx = 02 (6-feet), 03 (12-feet), 04 (24-feet)								3X-BC56J-xx
PCI 1-port UltraSCSI wide differential 32-bit/33-MHz PCI adapter (uses one PCI slot); includes external 68-pin HD connector, requires BN38C-xx cable (2 to 25 meters) to connect adapter to differential UltraSCSI shelf or RAID controller	4	8	2	4	8	2	5V	3X-KZPBA-CC
68-pin HD male-to-VHDCI male UltraSCSI cable; xx = 02, 03, 05, 10, 20 meters								BN38C-xx

RAID
Ultra160 2-channel internal RAID controller with 128-MB cache.	8	8	8	1	1	1	3.3V	3X-KZPDC-BE
Ultra160 4-channel internal RAID controller with 256-MB cache.	8	8	8	1	1	1	3.3V	3X-KZPDC-DF
NOTES: Tru64 UNIX V5.1B Patch Kit (BL22) required: T64V51BB22AS0002-20030415. ACU-XE (Array Configuration Utility ACU-XE) for Tru64 UNIX and OpenVMS is shipped on a CD-ROM with the controller; utilities are located at: http://h18002.www1.hp.com/alphaserver/ products/storage/sa5300a/ For Tru64 UNIX, Insight Management Agents kit, minimum V3.1 required; located at http://h30097.www3.hp.com/cma/ HP Management CD minimum V6.2 required CPQIM310.STOR.01 Patch Kit required; located at http://h30097.www3.hp.com/cma/
Ultra160 cable, VHDCI to VHDCI xx = 02 (6-feet), 03 (12-feet), 04 (24-feet)								3X-BC56J-xx

Fibre Channel
PCI to 2-Gb Fibre Channel adapter, 64-bit/66-MHz, single-channel	24	32	8	15	26	8	3.3V	DS-KGPSA-DA
PCI-X 2-Gbit Fibre Channel Host Bus Adapter NOTES: Tru64 UNIX: Requires V5.1B with Patch Kit: T64v51bb03as0001-20021229.tar OpenVMS: Requires V7.3-1 with TIMA kit: VMS73_1_SCSI_FIBRE_V0300 OpenVMS Clusters: Requires V7.3-1 with TIMA kit: VMS7_31_cLUSTER_V0100	32	32	8	26	26	8	3.3V	DS-KGPSA-EA
Fibre Channel cable (BNGBX-xx) xx=02, 03, 05, 10, 15, 30, 50 meters								BNGBX-xx

CIPCA
PCI CI adapter, requires two PCI slots Each PCI CI adapter ordered requires the mandatory selection of an I/O Expansion Drawer (see Step 6)	NA	NA	NA	2	4	1	5V	CIPCA-BA
Computer interconnect cable set, connects CIPCA to star coupler; select length xx=10, 20, 45 meters								BNCIA-xx

Step 10 - StorageWorks Universal Shelves

StorageWorks Model 4314R and Model 4354R Universal Drive Shelves
StorageWorks Model 4314R and 4354R Ultra3 SCSI (LVD) single-bus and split-bus Universal drive shelves; refer to StorageWorks Enclosure 4300 Family QuickSpecs when configuring shelves. When selecting a DS-SL13R-Bx split-bus shelf, two SCSI channels are required. No support for Model 4314R or 4314T single-bus shelves with 3X-KZPEA-DB adapter. Note that the depth of a DS-SL13R-xx shelf does not allow front and rear mounting. NOTE: DS-SL13R single-bus shelves include one 12-foot VHDCI to VHDCI SCSI cable; dual-bus shelves include two 12-foot VHDCI TO VHDCI SCSI cables.
	StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf, includes one power supply. No support for Model 4314R single-bus shelves with embedded Ultra3 SCSI adapter or 3X-KZPEA-DB adapter	DS-SL13R-AA
	StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf, includes one power supply. No support for Model 4314R single-bus shelves with embedded Ultra3 SCSI adapter or 3X-KZPEA-DB adapter	DS-SL13R-AJ
	StorageWorks Model 4354R Ultra3 SCSI (LVD) split-bus Universal drive rackmount shelf, includes two redundant power supplies, U.S.	DS-SL13R-BA
	StorageWorks Model 4354R Ultra3 SCSI (LVD) split-bus Universal drive rackmount shelf, includes two redundant power supplies, Japan	DS-SL13R-BJ

Disk Drives (Supported in Model 4314R and 4354R Universal Drive Enclosures)	36.4-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive	3R-A3838-AA
	72.8-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive	3R-A3839-AA
	146-GB Ultra320 SCSI 10,000 rpm 1-inch Universal disk drive	3R-A3841-AA
	18.2-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive	3R-A3848-AA
	36.4-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive	3R-A3849-AA
	72.8-GB Ultra320 SCSI 15,000 rpm 1-inch Universal disk drive	3R-A3851-AA

Step 11 - Storage Options

Step 11a – Tape Devices

AIT Hot-plug Tape Drives (for use in StorageWorks Model 4314R and 4354R Universal Drive Shelves)	AIT hot-plug tape drives require two Universal slots
	AIT 35/70-GB hot-plug LVD Universal tape drive, uses two slots in 43xxx shelves	3R-A2396-AA
	AIT 50/100-GB hot-plug LVD Universal tape drive, uses two slots in 43xxx shelves	3R-A2779-AA

AIT Autoloaders	AIT 35-GB rackmount autoloader, 8 cartridge, U.S.	280349-001
	Same as above, International	280349-B31
	AIT Rail kit for rackmount autoloader	284930-001

AIT Tape Libraries	SSL2020 AIT rackmount library with one AIT 50-GB drive and 20 slots, LVD	175196-B21
	SSL2020 AIT rackmount library with two AIT 50-GB drives and 20 slots, LVD	175196-B22

DAT Tape Drives	DAT 20/40-GB DDS4 hot-plug LVD Universal tape drive, uses two slots in 43xxx shelves	3R-A2780-AA
	DAT72 internal tape drive kit	3R-A4544-AA
	DAT72 external tape drive kit, U.S.	3R-A4545-AA
	DAT72 external tape drive kit, International	3R-A4546-AA
	DAT72 hot-plug tape drive kit	3R-A4546-AA

DLT/SDLT Tape Libraries	MSL5000 Embedded Fibre Option Kit, graphite, one card, 1 FC x 2 LVD	3R-A3746-AA
	MSL5000 Embedded Fibre Option Kit, opal, one card, 1 FC x 2 LVD	3R-A3871-AA

	MSL5026DLX, DLT rackmount library with one 40/80-GB DLT tape drive, LVD	231891-B21
	MSL5026DLX, DLT rackmount library with two 40/80-GB DLT tape drives, LVD	231891-B22
	MSL5026SL, SDLT rackmount library with one 110/220-GB SDLT tape drive, LVD; graphite	302512-B21
	MSL5026SL, SDLT rackmount library with two 110/220-GB SDLT tape drives, LVD; graphite	302512-B22
	MSL5026S2, SDLT rackmount library with 0 drives, LVD; graphite	293472-B21
	MSL5026S2, SDLT rackmount library with one 160/220-GB SDLT tape drive, LVD; graphite	293472-B22
	MSL5026S2, SDLT rackmount library with one 160/220-GB SDLT tape drive, LVD; graphite	293472-B23
	MSL5026S2, SDLT rackmount library with one 160/220-GB SDLT tape drive, Fibre Channel Interface; graphite	293472-B24
	MSL5026S2, SDLT rackmount library with two 160/220-GB SDLT tape drives, Fibre Channel Interface; graphite	293472-B25

	MSL5000 SDLT2 upgrade drive, all	293475-B21
	MSL5052SL SDLT rackmount library, 0 drives, LVD	255102-B21
	MSL5052SL SDLT rackmount library with two 110/220-GB drives, LVD	249491-B21
	MSL5052SL SDLT 110/220-GB drive field upgrade, LVD	231823-B22
	MSL5052S2, SDLT rackmount library with two 160/220-GB SDLT tape drives, LVD; graphite	293474-B21
	MSL5052S2, SDLT rackmount library with two 160/220-GB SDLT tape drives, Fibre Channel Interface; graphite	293474-B24
	ESL9322S2 SDLT tape library, with two 160/320-GB SDLT tape drives, 222 slots - requires 3X-KZPCA-AA adapter	293409-B22
	ESL9322S2 SDLT tape library, with eight 160/320-GB SDLT tape drives, 222 slots - requires 3X-KZPCA-AA adapter	293409-B28
	ESL9322S2 SDLT tape library, with two 160/320-GB SDLT tape drives, 322 slots - requires 3X-KZPCA-AA adapter	293410-B22
	ESL9322S2 SDLT tape library, with eight 160/320-GB SDLT tape drives, 322 slots - requires 3X-KZPCA-AA adapter	293410-B28
	ESL9000 SDLT2 LVD Upgrade Drive	293414-B21

	ESL9595SL SDLT tape library, 0 drives, 400 slots - requires 3X-KZPCA-AA adapter	274672-B21
	ESL9595SL SDLT tape library, two drives, 400 slots - requires 3X-KZPCA-AA adapter	274672-B22
	ESL9595SL SDLT tape library, 16 drives, 400 slots - requires 3X-KZPCA-AA adapter	274672-B28
	ESL9595SL SDLT tape library, 0 drives, 500 slots - requires 3X-KZPCA-AA adapter	281627-B21
	ESL9595SL SDLT tape library, two drives, 500 slots - requires 3X-KZPCA-AA adapter	281627-B22
	ESL9595SL SDLT tape library, 16 drives, 500 slots - requires 3X-KZPCA-AA adapter	281627-B28
	ESL9595SL SDLT tape library, 0 drives, 595 slots - requires 3X-KZPCA-AA adapter	281628-B21
	ESL9595SL SDLT tape library, two drives, 595 slots - requires 3X-KZPCA-AA adapter	281628-B22
	ESL9595SL SDLT tape library, 16 drives, 595 slots - requires 3X-KZPCA-AA adapter	281628-B28

	ESL9595S2 SDLT2 tape library, two drives, 400 slots - requires 3X-KZPCA-AA adapter	293411-B22
	ESL9595S2 SDLT2 tape library, 16 drives, 400 slots - requires 3X-KZPCA-AA adapter	293411-B28
	ESL9595S2 SDLT2 tape library, two drives, 500 slots - requires 3X-KZPCA-AA adapter	293412-B22
	ESL9595S2 SDLT2 tape library, 16 drives, 500 slots - requires 3X-KZPCA-AA adapter	293412-B28
	ESL9595S2 SDLT2 tape library, two drives, 595 slots - requires 3X-KZPCA-AA adapter	293413-B22
	ESL9595S2 SDLT2 tape library, 16 drives, 595 slots - requires 3X-KZPCA-AA adapter	293413-B28
	ESL9000 SDLT2 LVD upgrade drive	293414-B21

	ESL9000 Embedded Fibre Options Kit, 1 FC x 2 LVD SCSI (two cards) with card case	3R-A3935-AA
	ESL9000 Embedded Fibre Options Kit, 1 FC x 2 LVD SCSI (two cards) without card case	3R-A3745-AA

3U Rackmount Tape Drive Enclosure	3U LVD Rackmount Tape Drive Enclosure	274338-B21
	NOTE: The 3U Rackmount Tape Enclosure supports up to four internal half-height removable devices, or up to two full-height devices; select up to four AIT or DAT devices or two DLT/SDLT devices with 3U Rackmount Tape Enclosure (274338-B21) or select one of the preconfigured configurations listed below.
	AIT 35/70-GB tape drive, requires 3X-KZPCA-AA LVD adapter, carbon black	216884-B21
	AIT 50/100-GB tape drive, requires 3X-KZPCA-AA LVD adapter, carbon black	3R-A3753-AA
	DAT 20/40-GB tape drive, requires 3X-KZPCA-AA LVD adapter, carbon black	3R-A3752-AA
	DLT8000 40/80-GB tape drive, requires 3X-KZPCA-AA LVD adapter	146196-B22
	SDLT 110/220-GB tape drive, requires 3X-KZPCA-AA LVD adapter	192106-B25
	SDLT 160/320-GB tape drive, requires 3X-KZPCA-AA LVD adapter, carbon black	257319-B21
	Preconfigured configurations
	AIT 50-GB 3U rackmount kit, carbon black	274333-B21
	DLT 40/80-GB, 3U rackmount kit, carbon black	274332-B21
	DLT 40/80-GB, dual-drive, 3U rackmount kit, carbon black	274335-B21
	SDLT 110/220-GB, 3U rackmount kit, carbon black	274331-B21
	SDLT 110/220-GB, dual-drive, 3U rackmount kit, carbon black	274334-B21

5U Rackmount Tape Drive Enclosure	5U LVD Rackmount Tape Drive Enclosure	274339-B21
	NOTE: The 5U Rackmount Tape Enclosure supports four full-height removable devices; select up to four DLT or SDLT devices with 5U Rackmount Tape Enclosure (274339-B21) or select one of the preconfigured configurations listed below.
	DLT8000 40/80-GB tape drive, requires 3X-KZPCA-AA LVD adapter, carbon black	146196-B22
	SDLT 110/220-GB tape drive, requires 3X-KZPCA-AA LVD adapter, carbon black	192106-B25
	SDLT 160/320-GB tape drive, requires 3X-KZPCA-AA LVD adapter, carbon black	257319-B21
	Preconfigured configurations
	SDLT 110/220-GB Tape Array III, 5U rackmount kit, carbon black	274336-B21
	DLT 40/80-GB Tape Array III, 5U rackmount kit, carbon black	274337-B21
	DLT Tape Array III Model 0 enclosure, U.S.	168047-001
	Same as above, International	168047-B31
	Same as above, Japan	168047-291

Step 11b –Network Storage Routers

	1 Fibre Channel x 2 HVD Data Router	3R-A2673-AA
	1 Fibre Channel x 2 LVD Data Router	3R-A2774-AA
	2 x 4 LVD Fiber Channel to SCSI Network Storage Router	3R-A3740-AA
	2 x 4 HVD Fiber Channel to SCSI Network Storage Router	3R-A3741-AA
	Network Storage Router 1200	3R-A3747-AA

Step 11c – External Storage Solutions/Controllers

	41U graphite storage cabinet, M3220 controller assembly with dual HSV110 controllers, 6 M5214 dual FC loop 14-bay drive enclosures, 4 FC loop switches; Model 2C6D-B, 60 Hz	DS-SV110-JA
	41U graphite storage cabinet, M3220 controller assembly with dual HSV110 controllers, 6 M5214 dual FC loop 14-bay drive enclosures, 4 FC loop switches; Model 2C6D-B, 50 Hz	DS-SV110-JB
	41U graphite storage cabinet, M3220 controller assembly with dual HSV110 controllers, 12 M5214 dual FC loop 14-bay drive enclosures, 4 FC loop switches; Model 2C12D-B, 60 Hz	DS-SV110-KA
	41U graphite storage cabinet, M3220 controller assembly with dual HSV110 controllers, 12 M5214 dual FC loop 14-bay drive enclosures, 4 FC loop switches; Model 2C12D-B, 50 Hz	DS-SV110-KB
	Fibre Channel Controller (HSG80), includes 256-MB cache, requires following firmware:	DS-HSG80-BK
	- 8.6-4F ACS FW (222318-B22, QB-6BUAA-SD), one per controller - 8.6-4S ACS FW (222364-B22, QB-6ENAA-SC), one per controller - 8.6-4P ACS FW (222316-B22, QB-6CAAA-SD), one per controller Requires Tru64 UNIX software: 222320-B23, QB-65RAB-SE, one per controller Requires OpenVMS software: 222321-B22, QB-65RAC-SD, one per controller
	Additional 256-MB cache for HSG80	DS-HSDIM-AC
	Single cache battery, one per HSG80 controller	DS-SE2CS-CB
	Model 2200 controller shelf for HSG80 controller – only supported in 9000 Series and M-Series Cabinets	DS-SE2ZS-C8

EVA3000	The Enterprise Virtual Array 3000 (eva3000) is the mid-range member of the HP StorageWorks virtual disk array enabled by VersaStor technology. The EVA3000 is designed for the data center where there is a critical need for ever-increasing capacity/replication requirements, performance demands, and business continuance needs. Support is provided for HP StorageWorks Continuous Access, HP StorageWorks Business Copy, and HP OpenView Storage Operations Management Software. The EVA3000 is a full 2-Gb end-to-end Fibre Channel Array that operates in 1-Gb, 2-Gb, or mixed 1-Gb/2-Gb SAN fabrics. The EVA3000 is available in one of four integrated "independent bundle" configurations, which includes one pair of HSV100 controllers, two FC drive enclosures, and 8 to 16 FC hard drives (bundle dependent). For ordering information and configuration rules, refer to the EVA3000 QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11619_div/11619_div.html

EVA5000	The Enterprise Virtual Array 5000 (eva5000) is the mid to high-range member of the HP StorageWorks virtual disk array enabled by VersaStor technology. The EVA5000 is designed for the data center where there is a critical need for ever-increasing capacity/replication requirements, performance demands, and business continuance needs. Support is provided for HP StorageWorks Continuous Access, HP StorageWorks Business Copy, and HP OpenView Storage Operations Management Software. The EVA5000 is a full 2-Gb end-to-end Fibre Channel Array that operates in 1-Gb, 2-Gb, or mixed 1-Gb/2-Gb SAN fabrics. The EVA5000 is available in pre-defined configurations with controllers and expansion configurations without controllers. There is also a pre-defined configuration that is optimized for the High Performance Technical Computing (HPTC) environments. For ordering information and configuration rules, refer to the EVA5000 QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11006_div/11006_div.html

Step 11d – Fibre Channel Options

	The following disk drives, hubs, switches, and cables are used in Fibre Channel configurations using the DS-KGPSA-xx adapter.

Fibre Channel Disk Drives	36-GB 10K rpm dual-port 2-Gb/sec FC-AL 1-inch (25.4 mm) drive	3R-A3239-AA
	36-GB 15K rpm dual-port 2-Gb/sec FC-AL 1-inch (25.4 mm) drive	3R-A3210-AA
	72-GB 10K rpm dual-port 2-Gb/sec FC-AL 1-inch (25.4 mm) drive	3R-A3260-AA
	72-GB 15K rpm dual-port 2-Gb/sec FC-AL 1-inch (25.4 mm) drive	3R-A3971-AA
	146-GB 15K rpm dual-port 2-Gb/sec FC-AL 1-inch (25.4 mm) drive	3R-A3975-AA

Fibre Channel Hubs	StorageWorks Fibre Channel 7-port Storage Hub, International (Tru64 UNIX only)	DS-SWXHB-I7
	StorageWorks Fibre Channel 7-port Storage Hub, North America (Tru64 UNIX only)	DS-SWXHB-07
	StorageWorks Fibre Channel 7-port Storage Hub, Japan (Tru64 UNIX only)	DS-SWXHB-J7

Fibre Channel Switches	StorageWorks Fibre Channel 2-Gb 8-port SAN Switch	DS-DSGGD-AC
	StorageWorks Fibre Channel 2-Gb 16-port SAN Switch	DS-DSGGD-AD
	StorageWorks Fibre Channel 2-Gb 16-port SAN Switch	DS-DSGGD-BA
	StorageWorks Fibre Channel 2-Gb 64-port Core Switch	DS-DSGGE-AB
	StorageWorks SAN Switch 2-Gb 16-port Base	DS-DSGGD-CA
	StorageWorks SAN Switch 2-Gb 16-port Power Pack	DS-DSGGD-CB
	StorageWorks SAN Switch 2-Gb 8-port EL	DS-DSGGD-BC
	StorageWorks SAN Switch 2-Gb 8-port Power Pack	DS-DSGGD-CC
	StorageWorks SAN Switch 2-Gb 32-port Base	DS-DSGGD-AB
	StorageWorks SAN Switch 2-Gb 32-port PowerPak	DS-DSGGD-DB
	StorageWorks Core Switch 2-Gb 64-port Base	DS-DSGGE-BA
	StorageWorks Core Switch 2-Gb 64-port PowerPak	DS-DSGGE-CA

Fibre Channel Director/Edge Class Switches	SAN Director 64 (1 Gb) 32 ports, base model	DS-DMGGD-BA
	SAN Director 64 Long-wave 4-port module kit	DS-DMGGD-AC
	SAN Director 64 Short-wave 4-port module kit	DS-DMGGD-AD
	SAN Director 64 Combo, Long – 1 port/Short – 3 ports - Wave Module Kit	DS-DMGGD-AE
	SAN Edge Switch 2 Gb, 16 ports	DS-DMGGE-BB
	SAN Edge Switch 2 Gb, 32 ports	DS-DMGGE-BC
	SAN Director 2 Gb, 140 ports	DS-DMGGD-CA
	SAN Edge Switch 2 Gb, 24 ports	DS-DMGGE-BD
	2-Gb SFF-SW Trncvr Kit	3R-A2973-AA
	NOTE: Connection for, or between, 1-Gb and/or 2-Gb SAN switches require different cables. Refer to the Switches, Hubs, and Interconnects QuickSpecs at: http://www.compaq.com/products/quickspecs/north_america/10490.html

Fibre Channel Cables	NOTE: The following LC-SC connector cables support connectivity between 1-Gb and 2-Gb devices.
	2-meter LC-SC multi-mode Fibre Channel cable	3R-A2976-AA
	5-meter LC-SC multi-mode Fibre Channel cable	3R-A2977-AA
	15-meter LC-SC multi-mode Fibre Channel cable	3R-A2978-AA
	NOTE: The following LC-LC connector cables support connectivity between 2-Gb and 2-Gb devices.
	2-meter LC-LC multi-mode Fibre Channel cable	3R-A2979-AA
	5-meter LC-LC multi-mode Fibre Channel cable	3R-A2980-AA
	15-meter LC-LC multi-mode Fibre Channel cable	3R-A2981-AA

Modular SAN Array 1000 (msa 1000)	MSA1000 SAN Storage Array NOTE: Supported with DS-KGPSA-DA host bus adapter only; Tru64 UNIX requires V5.1B with Patch Kit: T64v51bb03as0001-20021229.tar; OpenVMS requires V7.3-1 with TIMA kit: VMS731_mSA1000-V0100 kit	3R-A4328-AA

Step 12 - Networks and Communications

Step 12a - Networks and Communications - Mandatory

Mandatory selection of at least one of the following Ethernet adapters (3X-DE602-BB or 3X-DEGXA-TA) is required for each ES47 system ordered Maximum network adapters supported per system, all types - Tru64 UNIX: 16, OpenVMS: 16

	Maximum # Supported
	Tru64 UNIX			OpenVMS
	Per Model 8 System	Per Model 16 System	Per External I/O Drawer	Per Model 8 System	Per Model 16 System	Per External I/O Drawer	Slot Type
Ethernet Adapters
PCI (32/64-bit, 33-MHz to 66-MHz) dual-port 10/100 Ethernet (UTP/RJ45s) NIC and Base Module. (One 3X-DE602-TA or 3X-DE602-FA optional add-on daughter card can be combined with this module.) Use BN25G, BN26M, BN24Q, or BN28Q twisted pair RJ45 cables.	8	8	8	8	8	8	3.3V	3X-DE602-BB
PCI-X/PCI Single-port 10/100/1000 Mbps (Twisted-Pair Copper with RJ45) Gigabit Ethernet NIC. Use BN25G, BN26M, BN24Q, BN28Q, or equivalent cables with RJ45 connectors. NOTE: Only supported in PCI mode. Supported as a cluster interconnect under OpenVMS and Tru64 UNIX. OpenVMS remedial kit required: EV7 Tima: DEC-AXPVMS-VMS731 _EV7-V0100--4.PCSI LAN Tima: DEC-AXPVMS-VMS731 _LAN-V0100--4.PCSI	8	8	8	8	8	8	3.3V	3X-DEGXA-TA

Step 12b - Networks and Communications – Optional

	Maximum # Supported
	Tru64 UNIX			OpenVMS
	Per Model 8 System	Per Model 16 System	Per External I/O Drawer	Per Model 8 System	Per Model 16 System	Per External I/O Drawer	Slot Type
Ethernet Adapters
Dual-port 10/100 Ethernet (UTP/RJ45) add-on daughter card for use with the 3X-DE602-BB only. The combined 3X-DE602-BB and 3X-DE602-TA modules provide four 10/100 (UTP/RJ45s) ports in a single PCI slot option. OpenVMS remedial kit required: VMS731_LAN-V0100 Use BN25G, BN26M, BN24Q, or BN28Q twisted pair RJ45 cables. NOTE: 3X-DE602-TA cannot be used standalone.	8	8	8	8	8	8	3.3V	3X-DE602-TA
Single-port 100 Mbps (MMF/duplex-SC) add-on daughter card for use with the 3X-DE602-BB. The combined 3X-DE602-BB and 3X-DE602-FA provides two 10/100 (UTP/RJ45s) and one 100Mbps (MMF/SC) ports in a single PCI slot option. Use BN34A or BN34B cables. NOTE: 3X-DE602-FA cannot be used standalone.	8	8	8	8	8	8	3.3V	3X-DE602-FA
PCI-X/PCI Single-port 1000 Mbps (Fiber with duplex-SC) Gigabit Ethernet NIC. Use BN34A, BN34B, or equivalent cables with SC connectors. NOTES: Only supported in PCI mode. Supported as a cluster interconnect under OpenVMS and Tru64 UNIX. OpenVMS remedial kit required: EV7 Tima: DEC-AXPVMS-VMS731 _EV7-V0100- -4.PCSI LAN Tima: DEC-AXPVMS-VMS731 _LAN-V0100--4.PCSI Red Hat Linux V7.2 supported option, maximum one per system.	8	8	8	8	8	8	3.3V	3X-DEGXA-SA

FDDI Controllers
PCI (32-bit, 33-MHz) to FDDI SAS (MMF/duplex-SC) NIC Use BN34A, BN34B, or BN34D cables.	8	8	8	8	8	8	3.3V	3X-DEFPA-AC
PCI (32-bit, 33-MHz) to FDDI DAS (MMF/duplex-SC) NIC Use BN34A, BN34B, or BN34D cables.	8	8	8	8	8	8	3.3V	3X-DEFPA-DC
PCI (32-bit, 33-MHz) to FDDI DAS (UTP/RJ45) NIC Use BN25G, BN26M, BN24Q, or BN28Q twisted pair RJ45 cables.	8	8	8	8	8	8	3.3V	3X-DEFPA-MC
PCI (32-bit, 33-MHz) to FDDI SAS (UTP/RJ45) NIC Use BN25G, BN26M, BN24Q, or BN28Q twisted pair RJ45 cables.	8	8	8	8	8	8	3.3V	3X-DEFPA-UC
Multimode fiber optic (MMF) 62.5/125um duplex cable with SC-to-MIC connectors xx = available lengths: (01, 03, and 10) for 1, 3, and 10 meters								BN34D-xx

Synchronous/Asynchronous Controllers
PCI (32-bit, 33-MHz) to Dual-port Intelligent Synchronous Communications NIC – Requires at least one (maximum two) BN34x sync cable listed below	4	4	4	4	4	4	3.3V	3X-PBXDD-AA
PCI (32-bit, 33-MHz) to Quad-port Intelligent Synchronous Communications NIC – Requires at least one (maximum four) BN34x sync cable listed below.	4	4	4	4	4	4	3.3V	3X-PBXDD-AB
Synchronous-specific Cables
EIA-530 Single-port cable								3X-BC34G-06
V.24/EIA-232 Single-port cable								3X-BC34L-06
V.11/x.21 Single-port cable								3X-BC33S-06
V.35 Single-port cable								3X-BC34T-06

ATM Adapters
PCI (32-bit, 33-MHz) to 155 Mbps ATM, Copper NIC with RJ45 connector. Use BN25G-xx, or BN26M-xx cables.	8	8	8	8	8	8	3.3V	3X-DAPBA-UA
PCI (32-bit, 33-MHz) to 155 Mbps ATM Fiber NIC with SC connector. Use BN34B-xx cable.	8	8	8	8	8	8	3.3V	3X-DAPBA-FA

Asynchronous Communications
PCI (32-bit, 33-MHz) to 4-port Async Communications NIC with DB-25 octopus cable	2	2	2	2	2	2	3.3V	PBXDA-BA
PCI (32-bit, 33-MHz) to 8-port Async Communications NIC	2	2	2	2	2	2	3.3V	PBXDA-BB
PCI (32-bit, 33-MHz) to 16-port Async Communications Controller and rackmount 16-port distribution box with RJ45 connectors	2	2	2	2	2	2	3.3V	PBXDA-AC

Asynchronous Connector Adapters
RJ45-to-DB-25 Converter Cable								CXI01-AC
RJ45-to-DEC MJ11 Converter Cable (8 pack)								CXI01-AF

Ethernet, FDDI, ATM Cables
Multimode fiber optic (MMF) 62.5/125um duplex cable, with SC-to-ST connectors. xx = available lengths: (2E, 4E, 01, 03, 10, 20, 30) for 2.4, 4.5, 1, 3, 10, 20, and 30 meters								BN34A-xx
Multimode fiber optic (MMF) 62.5/125um duplex cable, with SC-to-SC connectors. xx = available lengths: (2E, 4E, 01, 03, 10, 20, 30) for 2.4, 4.5, 1, 3, 10, 20, and 30 meters								BN34B-xx
Category 5e (4-Unshielded Twisted Pairs / UTP) straight-through cable with RJ45-to-RJ45 connectors for system to switch, repeater, or hub connectivity. xx = available lengths: (0B, 0E, 01, 03, 04, 07) for 0.2, 0.5, 1, 3, 4, and 7 meters								BN25G-xx
Category 5e (4-Twisted Pairs, Screened/ ScTP) straight-through cable with RJ45-to-RJ45 connectors for system to switch, repeater, or hub connectivity. xx = available lengths: (0E, 01, 03, 04, 07) for 0.5, 1, 3, 4, and 7 meters								BN26M-xx
Category 5e (4-Unshielded Twisted Pairs / UTP) Xover cable with RJ45-to-RJ45 connectors for system to switch, repeater, or hub connectivity. xx = available lengths: (0E, 01, 03, 04, 07) for 0.5, 1, 3, 4, and 7 meters								BN24Q-xx
Category 5e (4-Twisted Pairs, Screened / ScTP) Xover cable with RJ45-to-RJ45 connectors for system to switch, repeater, or hub connectivity. xx = available lengths: (0E, 01, 03, 04, 07) for 0.5, 1, 3, 4, and 7 meters								BN28Q-xx

Step 13 - Graphics Support

	Maximum # Supported
	Tru64 UNIX			OpenVMS
	Per Model 8 System	Per Model 16 System	Per External I/O Drawer	Per Model 8 System	Per Model 16 System	Per External I/O Drawer	Slot Type
ATI RADEON 7500 2D AGP graphics accelerator	4	4	4	1	1	1	AGP(1)	3X-PBXGG-AB
ATI RADEON 7500 2D PCI graphics accelerator	4	4	4	1	1	1	3.3V PCI	3X-PBXGG-AA
Tru64 UNIX Open3D license for RADEON7500 (required for 3D functionality)								QL-6ZRA9-AA
OpenVMS Open3D license for RADEON 7500 (required for 3D functionality)								QL-0ADA9-AA
Additional Tru64 UNIX media kit for RADEON 7500 (initial kit ships with RADEON card)								QA-6ZRAA-H8
Additional OpenVMS media kit for RADEON 7500 (initial kit ships with RADEON card)								QA-6ZPAA-H8
(1) Only supported in 2X mode
NOTE : Maximum graphics adapters per system, all types - Tru64 UNIX 4, OpenVMS 1

Step 14 - MEMORY CHANNEL

Up to two PCI-to-System Area Network adapters (CCMAB-BA) are supported in a single system. Each PCI-to-System Area Network adapter must be the only device on the PCI/PCI-X bus segment. Two-node clusters can be configured by ordering a CCMAB-BA for each node and one BN39B-04 or BN39B-10 cable, cable connects directly to CCMAB-BA in each node. For a two-node cluster that will not need to be rebooted when adding additional members, order one CCMAB-BA adapter and one BN39B-04 or BN39B-10 cable for each node and one CCMHB-AA hub for the cluster. For three or four node clusters, order one CCMAB-BA adapter and one BN39B-04 or BN39B-10 cable for each node and one CCMHB-AA hub for the cluster. CCMHB-AA includes four CCMLB-AA line cards and supports up to four nodes; expansion up to eight system nodes can be achieved by adding up to four CCMLB-AA line cards. If two CCMAB-BAs are configured in each system, a second CCMHB-AA is required. If nodes must be separated by a distance longer than standard copper cables allow the CCMFB option converts the output of the standard CCMAB controller or CCMLB line card to single-mode fiber optic cable. The fiber optic connection may be up to 2,000 meters long between two CCMAB controllers connected in virtual hub mode, or 3,000 meters between a CCMAB controller and a CCMHB hub. (The connection from the CCMHB hub to a second system may also be 3,000 meters.) The CCMFB option requires a second PCI slot in the system from which it draws power only. It is normally connected to the corresponding CCMAB controller with the short BN39B-01 cable. The CCMFB is also used in the CCMHB hub where it occupies a slot normally used by the CCMLB line card, limiting expansion to four radial fiber optic connections. CCMHB-BA hub expansion box provides additional slots for up to eight fiber optic connections. Two standard length single-mode fiber optic cables are available (BN34R-10 and BN34R-31); however, users normally provide this fiber optic connection. Fiber optic connectivity is completely transparent to the systems using it and has no performance impact.

Tru64 UNIX (V5.1B)	Each system node in the cluster requires a TruCluster software license (QL-6BRAQ-AA) or TruCluster Plus Software Package (QP-6R9AQ-AA)

OpenVMS (V7.3-1)	OpenVMS V7.3-1 and OpenVMS Cluster License (QL-MUZAE-AA) and required

MEMORY CHANNEL Controller	PCI-to-System Area Network Controller, maximum two - 5.0V/3.3V compatible	CCMAB-BA
	System Area Network Hub with four line cards; includes BN19P-2E power cord for Canada, Japan, and U.S. For other regions, order appropriate power cord from list that follows.	CCMHB-AA
	Hub expansion box with no line cards	CCMHB-BA
	Expansion line card for CCMHB hub	CCMLB-AA
	1-meter cable for CCMAB and CCMHB	BN39B-01
	4-meter cable for CCMAB and CCMHB	BN39B-04
	10-meter cable for CCMAB and CCMHB	BN39B-10
	Copper-to-single mode fiber optic converter - 5.0V/3.3V compatible	CCMFB-BA
	Rackmount kit (3U) for CCMHB (Memory Channel Hub II); required for mounting in H9A40/H9A45 Cabinets.	3X-BA61R-MD
	Power cord for rackmount CCMHB hub	BN35S-02

Country-specific Power Cords for Standalone MEMORY CHANNEL Hubs	Australia, New Zealand	BN19H-2E
	Central Europe	BN19C-2E
	Denmark	BN19K-2E
	Egypt, India	BN19S-2E
	Ireland, United Kingdom	BN19A-2E
	Israel	BN18L-2E
	Italy	BN19M-2E
	Japan, 2.5-meter, Dentori approved	3X-BN46F-02
	Switzerland	BN19E-2E
	NOTE: When using MEMORY CHANNEL, refer to the TruCluster QuickSpecs for configuration guidelines and restrictions: http://www.compaq.com/products/quickspecs/division/10657.html The MEMORY CHANNEL controller, CCMAB-AA, must be revision D02 or later.

Step 15 - Keyboards, Mouse, Monitors, Power Cords

Keyboard, Mouse, and Video Extension Cable Kit	Two 6-foot/1.8-meter USB keyboard/mouse extension cables and one 6-foot/1.8-meter video extension cable (one per system)	CK-GSKVM-AA

Video Extension Cable	6-foot/1.8-meter video extension cable	BN39C-02

Mouse	3-button mouse - USB	3X-PBQWS-WB

Monitors	Graphics monitors other than those listed can be used if compatible with SVGA graphics ordered with system A video cable, 6-foot/1.8-meter length, is included with all variants of monitors Video extension cable required if monitor is located more than 1-meter from server Monitors will ship with, but not be integrated with systems

Carbon/Silver Monitors	V7550 17-inch (16-inch viewable image size) flat-faced shadow mask color monitor, two-tone (carbon/silver), 0.25mm dot pitch, VGA to 1024 x 768 @85 Hz, MPRII/TCO99/ Energy Star compliant, Northern Hemisphere with North America power cord, VGA cable	3R-A4002-AA
	Same as above, with Euro power cord	3R-A4201-AA
	Same as above, APD, no power cord	3R-A4202-AA
	Same as above, Southern Hemisphere, with Australia/New Zealand power cord	3R-A4203-AA

	S7500 17-inch (16-inch viewable image size) FST multi-frequency color monitor, 2-tone (carbon/silver), 0.24-mm dot pitch, VGA to 1024 x 768 @85 Hz, MPRII/TCO 99/Energy Star Compliant, Northern Hemisphere with PRC power cord CCIB, VGA cable	3R-A4800-AA

	P930 19-inch (18-inch viewable image size) auto-scanning color monitor, Diamondtron NF, 0.24-mm aperture grille pitch, VGA to 1600 x 1200 @85 Hz, MPRII/TCO 99/Energy Star Compliant, Northern Hemisphere with NA power cord, VGA cable	3R-A4215-AA
	Same as above, with Euro power cord	3R-A4391-AA
	Same as above, Taiwan, with North America power cord	3R-A4392-AA
	Same as above, Southern Hemisphere, 0.25 to 0.27 mm aperture grille pitch, with Australia/New Zealand power cord	3R-A4393-AA

	S9500 19-inch (18-inch viewable image size) FST multi-frequency color monitor, 2-tone (carbon/silver), 0.24-mm dot pitch, VGA to 1280 x 1024 @85 Hz, MPRII/TCO 99/Energy Star Compliant, Northern Hemisphere with PRC power cord CCIB, VGA cable	3R-A4801-AA

	P1130 21-inch (19.8-inch viewable image size) FD Trinitron auto-scanning color monitor, 0.24-mm aperture grille pitch, VGA to 1792 x 1344 @85Hz, dual video input, USB Hub, MPRII/TCO 99/Energy Star Compliant, Northern Hemisphere with NA power cord, VGA cable	3R-A4216-AA
	Same as above, with Euro power cord	3R-A4396-AA
	Same as above, Taiwan, North America power cord	3R-A4397-AA
	Same as above, with PRC power cord, CCIB	3R-A4400-AA
	Same as above, Southern Hemisphere, with Australia/New Zealand power cord	3R-A4398-AA

Carbon/Silver Flat Panel Monitors	TFT1825, 18-inch (18-inch viewable image size) TFT flat panel monitor, 0.28mm pixel pitch, 1600 x 1200 @60Hz, multi-mode support, MPRII/TCO99/Energy Star compliant, one VGA, one DVI-I input connector. North America power cord, VGA and DVI-I cables	3R-A4292-AA
Carbon/Silver Flat Panel Monitors	L1530, 15-inch (15-inch viewable image size) TFT flat panel monitor, 0.297 mm pixel pitch, 1024 x 768 @60 Hz, multi-mode support, MPRII/TCO99/Energy Star compliant, two video input connectors (one VGA and one DVI-I), North America power cord, VGA and DVI-I cables	3R-A4857-AA
	L1530, 15-inch (15inch viewable image size) TFT flat panel monitor, 0.297 mm pixel pitch, 1024 x 768 @60 Hz, multi-mode support, MPRII/TCO99/Energy Star compliant, two video input connectors (one VGA and one DVI-I), Euro power cord, VGA and DVI-I cables	3R-A4858-AA

Monitor Power Cords	North America, 120V, 75-inch	BN26J-1K
	Australia, New Zealand, 2.5-meter	BN19H-2E
	Central Europe, 2.5-meter	BN19C-2E
	Denmark, 2.5-meter	BN19K-2E
	Egypt, India, South Africa, 2.5-meter	BN19S-2E
	Israel, 2.5-meter	BN18L-2E
	Italy, 2.5-meter	BN19M-2E
	Japan, 2.5-meter, Dentori approved	3X-BN46F-02
	Switzerland, 2.5-meter	BN19E-2E
	UK, Ireland, 2.5-meter	BN19A-2E

Keyboards - USB Keyboard/Language	Tru64 UNIX	OpenVMS
U.S./English/International keyboard	3R-LKQ50-BA	3X-LK463-A2
Arabic keyboard	3R-LKQ50-BR	-
Belgian keyboard	3R-LKQ50-AB	3X-LK463-AB
BHCSY keyboard	3R-LKQ50-AX	-
Canadian/English keyboard	-	3X-LK463-AQ
Canadian/French keyboard	3R-LKQ50-AC	3X-LK463-AC
Cyrillic keyboard (Russian)	3R-LKQ50-BT	3X-LK463-BT
Czech keyboard	3R-LKQ50-BV	3X-LK463-BV
Danish keyboard	3R-LKQ50-AD	3X-LK463-AD
Dutch keyboard	3R-LKQ50-AH	3X-LK463-AH
Finnish keyboard	3R-A4590-AA	3X-LK463-AF
French keyboard	3R-LKQ50-AP	3X-LK463-AP
German keyboard	3R-LKQ50-AG	3X-LK463-AG
Greek keyboard	3R-LKQ50-BH	3X-LK463-BH
Hebrew keyboard	3R-LKQ50-AT	3X-LK463-AT
Hungarian keyboard	3R-LKQ50-BQ	3X-LK463-BQ
Italian keyboard	3R-LKQ50-AI	3X-LK463-AI
Japanese keyboard	3R-LKQ50-AJ	-
Korean keyboard	3R-LKQ50-BK	-
Latin-American keyboard	3R-LKQ50-AR	-
Norwegian keyboard	3R-LKQ50-AN	3X-LK463-AN
Polish keyboard	3R-LKQ50-BP	3X-LK463-BP
Portuguese keyboard	3R-LKQ50-AV	3X-LK463-AV
Romanian keyboard	-	3X-LK463-BL
Simplified Chinese keyboard	3R-LKQ50-CV	-
Spanish keyboard	3R-LKQ50-AS	3X-LK463-AS
Swedish keyboard	3R-LKQ50-AM	3X-LK463-AM
Swiss/French keyboard	3R-LKQ50-AK	3X-LK463-AK
Swiss/German keyboard	-	3X-LK463-AL
Traditional Chinese keyboard	3R-LKQ50-BI	-
Thai keyboard	3R-LKQ50-CB	-
Turkish keyboard	3R-LKQ50-BU	3X-LK463-BU
Turkish/F keyboard	-	3X-LK463-BW
UK keyboard	3R-LKQ50-AE	-
Yugoslavian keyboard	-	3X-LK463-BY

Rackmount Keyboard/Drawer and Keyboard/Monitor Options	PS2 to USB Converter – allows for connection of a PS2 keyboard and/or mouse to an AlphaServer ES47 System	3R-A4495-AA
	HP Rackmount Flat Panel Monitor	3R-A4220-AA
	Integrated Keyboard and Drawer
	Integrated Keyboard and Drawer (1U), North America	3R-A4404-AA
	Integrated Keyboard and Drawer (1U), International	3R-A4405-AA
	Integrated Keyboard and Monitor (TFT5600RKM)
	Integrated Keyboard and Monitor, North America	3R-A3496-AA
	Integrated Keyboard and Monitor, France	3R-A3709-AA
	Integrated Keyboard and Monitor, Germany	3R-A3708-AA
	Integrated Keyboard and Monitor, International	3R-A3498-AA
	Integrated Keyboard and Monitor, Spain	3R-A3710-AA
	Integrated Keyboard and Monitor, United Kingdom	3R-A3706-AA
	NOTE: Integrated Keyboard and Drawer and Integrated Keyboard and Monitor require one Keyboard and Mouse Adapter for USB (3R-A4495-AA)

Step 16 - System Software

Tru64 UNIX	Media and documentation required for first system on site Software Processor Code = Q Tru64 UNIX base systems include pre-installed software, Base license, Unlimited User license, Server Extension license, Internet Express, and Secure Web Server
	Tru64 UNIX media and online documentation on CD-ROM	QA-6ADAA-H8
	Tru64 UNIX full hard copy documentation	QA-6ADAA-GZ
	TruCluster Plus Software Package with licenses for TruCluster Server, Logical Storage Manager and AdvFS Utilities	QP-6R9AQ-AA
	TruCluster Server license	QL-6BRAQ-AA
	Logical Storage Manager license	QL-2GVAQ-AA
	AdvFS Utilities license	QL-0EGAQ-AA
	Advanced Server for Tru64 UNIX, 25 client concurrent use license	QL-5U29M-3D
	Advanced Server for Tru64 UNIX, 50 client concurrent use license	QL-5U29M-3E
	Advanced Server for Tru64 UNIX, 100 client concurrent use license	QL-5U29M-3F
	Advanced Server for Tru64 UNIX, 250 client concurrent use license	QL-5U29M-3G
	Advanced Server for Tru64 UNIX, 500 client concurrent use license	QL-5U29M-3H
	Layered products media and documentation for Tru64 UNIX on CD-ROM	QA-054AA-H8
	DECnet/OSI end-system function license for Tru64 UNIX	QL-MTJAQ-AA
	DECnet/OSI extended license for Tru64 UNIX	QL-MTKAQ-AA

OpenVMS	Media and documentation required for first system on site Software Processor Code = Q OpenVMS system base packages include Base license, Enterprise Integration Server for OpenVMS License Package and OpenVMS OS media on CD-ROM Enterprise Integration Package includes licenses for TCP/IP Services for OpenVMS, DECwindows Motif for OpenVMS Alpha, DECnet-Plus for OpenVMS Alpha End System, Archive/Backup System for OpenVMS Management Tools, Archive/Backup Agent for Windows NT®, Office Server for OpenVMS, Office Server Client Access, PATHWORKS 32, Advanced Server/PATHWORKS for OpenVMS. OpenVMS Concurrent Use licenses provide the right to interactively use the operating system by the specified number of concurrent users on a designated OpenVMS system. OpenVMS Concurrent Use licenses can be moved from one system to another at user discretion and can be shared in a mixed OpenVMS VAX and OpenVMS Alpha cluster. OpenVMS Traditional Unlimited Use license is system specific and can only be used on one single system at a time. It cannot be shared between systems or in an OpenVMS VAX or OpenVMS Alpha Cluster.
	Concurrent Use 1-user license	QL-MT3AA-3B
	Concurrent Use 2-user license	QL-MT3AA-3C
	Concurrent Use 4-user license	QL-MT3AA-3D
	Concurrent Use 8-user license	QL-MT3AA-3E
	Concurrent Use 16-user license	QL-MT3AA-3F
	Concurrent Use 32-user license	QL-MT3AA-3G
	Concurrent Use 64-user license	QL-MT3AA-3H
	Concurrent Use 128-user license	QL-MT3AA-3J
	Concurrent Use 256-user license	QL-MT3AA-3K
	Traditional unlimited-user license	QL-MT2AQ-AA
	OpenVMS media and online documentation on CD-ROM	QA-MT1AA-H8
	OpenVMS hard copy documentation	QA-001AA-GZ
	OpenVMS base hard copy documentation	QA-09SAA-GZ
	OpenVMS Alpha Software Products Library Package: Layered products media and documentation for OpenVMS on CD-ROM, includes media and documentation for all products licensed in the Enterprise Integration Package.	QA-03XAA-H8
	DECnet-Plus/DECnet end-system license	QL-MTFAQ-AA
	DECnet-Plus/DECnet extended-function license	QL-MTHAQ-AA
	Cluster License for OpenVMS Alpha	QL-MUZAQ-AA
	OpenVMS Volume shadowing license	QL-2A1AQ-AA
	A more complete software list can be found at: http://www.openvms.compaq.com/swcat/index.html

OpenVMS Galaxy Licensing Requirements	For more details about OpenVMS Galaxy licensing requirements, refer to Software Product Description for the Galaxy Software Architecture on OpenVMS Alpha, SPD 70.44.xx
	OpenVMS SMP License (included in Dual CPU Building Block Module) is mandatory for each CPU. For each AlphaServer GS1280 CPU in an OpenVMS Galaxy, one OpenVMS Galaxy License if mandatory HP layered products are licensed as follows: One capacity license per system One user license per user One capacity license per system One user license per user One OpenVMS Base Operating System License is mandatory for an AlphaServer GS1280 configured as an OpenVMS Galaxy system
	Maximum instances per system or hard partition for GS1280:

	Model 8	Model 16	Model 32	Model 64
CPUs	8	16	32	32 x 2 hard partitions
Instances	2	4	8	8 x 2 hard partitions
I/O Master Drawers	2	4	8	8 x 2 hard partitions

	For more information about OpenVMS Galaxy requirements, configurations, and procedures, refer to the OpenVMS Alpha Galaxy Guide. The latest version is always available at http://h71000.www7.hp.com/availability/AA-REZQE-TE.pdf
	Galaxy 1-CPU License	QL-66XAA-3B
	Galaxy 2-CPU License	QL-66XAA-3C
	Galaxy 4-CPU License	QL-66XAA-3D
	Galaxy 8-CPU License	QL-66XAA-3E
	Galaxy 16-CPU License	QL-66XAA-3F
	Example: 24-CPU GS1280 system in which all processors are licensed for OpenVMS with two hard partitions (one 8-CPU SMP and one 16-CPU Galaxy)
	Base system order would include a DY-1280A-AC and 12 3X-KN72C-AC Dual CPU Building Block modules One QL-66XAA-3F Galaxy 16-CPU license for a total of 16 Galaxy licenses for the 16-CPU hard partition with Galaxy No other licenses are required for OpenVMS on the SMP instance in the second hard partition with eight CPUs

Step 17 - Hardware and Software Support Services

Select one of the optional HP Care Pack Service Packages described below that best supports the customer's operational requirements for system availability.
Installation or Installation and Startup services are highly recommended for all AlphaServer GS1280 systems.

HP Care Pack Services	HP Care Pack Services are available for AlphaServer systems running Tru64 UNIX or OpenVMS operating systems. HP Care Pack Services are designed for customers who require support beyond that provided by the hardware product warranty with coverage for both Principal servers systems and SSPs (Subsequent System Packages) - that meet a full range of customer support requirements.

Program Features – Principal Server
HP Support Plus	13x5 HW/SW support 4-hour response on-site hardware support 2-hour response for software support License Subscription for HP O/S software and embedded L/P (i.e., EIS for OpenVMS, unlimited users, and server extensions for Tru64 UNIX) Consolidated Software Media Update Distribution for OpenVMS or Tru64 UNIX and their layered products. (Some layered products on Consolidated Media Update Distribution can be ordered separately.)

HP Support Plus 24	24x7 HW/SW support Named HW engineer 4-hour response on-site hardware support 2-hour response for software support License Subscription for HP O/S software and embedded L/P (i.e., EIS for OpenVMS, unlimited users, and server extensions for Tru64 UNIX) Consolidated Software Media Update Distribution for OpenVMS or Tru64 UNIX and their layered products. (Some layered products on Consolidated Media Update Distribution can be ordered separately.)

Program Features – Additional Services
SSPs (Subsequent System Packages)	For HP Care Pack Support Plus and Support Plus 24 HW Support at same level as corresponding package for Principal server License Subscription: HP O/S (where applicable) Telephone support through Principal server covered by full support package

Installation	Pre-installation review Unpacking of equipment Assemble and test Basic product usage info No software installation added

Installation and Startup HP O/S	Pre-installation review Unpacking of equipment Assemble and test Basic product usage info Install operating systems Product configuration Print and network access Orientation

Model/HP Care Pack Services	Principal Server 1 year	Principal Server 3 years	Subsequent Systems 1 year	Subsequent Systems 3 years
AlphaServer GS1280 Model 8
HP Support Plus	FP-W01BA-12	FP-W01BA-36	FP-W21BA-12	FP-W21BA-36
HP Support Plus 24	FP-W02BA-12	FP-W02BA-36	FP-W22BA-12	FP-W22BA-36
Installation	FP-WINST-BA	FP-WINST-BA	FP-WINST-BA	FP-WINST-BA
Installation and Startup	FP-WSTAR-BA	FP-WSTAR-BA	FP-WSTAR-BA	FP-WSTAR-BA

AlphaServer GS1280 Model 16
HP Support Plus	FP-W01BB-12	FP-W01BB-36	FP-W21BB-12	FP-W21BB-36
HP Support Plus 24	FP-W02BB-12	FP-W02BB-36	FP-W22BB-12	FP-W22BB-36
Installation	FP-WINST-BB	FP-WINST-BB	FP-WINST-BB	FP-WINST-BB
Installation and Startup	FP-WSTAR-BB	FP-WSTAR-BB	FP-WSTAR-BB	FP-WSTAR-BB

NOTES:

AlphaServer GS1280 Model 8 and 16 systems include one-year parts and labor warranty with 5x9, on-site Next Business Day response.
HP Care Pack Services include support for new HP branded hardware options internal to the AlphaServer enclosure plus a monitor (17-inch or less excluding flat panel models).
External storage devices/cabinets carry their own level of warranty and should be quoted separately for uplifted warranty services.
In addition to the HP Care Pack Services shown above, other service packages are available for separate hardware and software support. For more information on Hardware and Software Upfront Services and other HP service options available for AlphaServers, please consult your Sales Account Manager, HP Services Principal, or visit: http://www.hp.com/hps/ - NOTE: This website is available in English only.

Recommended Factory Integration Services for GS1280 Systems	Value-added Implementation Services (VIS) provides systems integration and delivery services. VIS services, including system integration, extended burn-in, custom documentation, and on-site services can be custom-quoted for the full range of AlphaServer configurations. These pre-packaged services are offered for systems shipped to North America and Japan. For similar services in Europe, e-mail specific requirements to: customsystems.europe@hp.com For similar services in Asia/Pacific, e-mail specific requirements to: customsystems.asiapacific@hp.com
	Pre-packaged VIS services are recommended for popular AlphaServer GS1280 system configurations that include up to one storage array: Basic Integration Service (YT-VISIT-B1) System integration, testing, extended burn-in, custom documentation, and installation of a single operating system instance Extra RAID pair service (YT-VISIT-R1) Clustering Service (YT-VISIT-C1)

Basic Integration Service	Systems integration and delivery services related to the configuration of the first and/or only instance of an operating system on a single AlphaServer GS1280 building block. Includes the following:	YT-VISIT-B1
	Staging and Integration of the AlphaServer GS1280 Software load of a single instance of an operating system and current revisions of firmware Hardware configuration, custom placement, and integration of internal options of the server per customer specifications Installation of a single instance of either Tru64 UNIX or OpenVMS Operating System Configuration, exercise, and test of up to one intelligent RAID array controller and associated disks per customer requirements Testing of the system and its components for a full 100 hour burn-in Mini-CCD (Custom Configuration Documentation) containing equipment listing, system environmental information, and software version levels

Extra RAID Pair Service	Configuration of additional Intelligent RAID controller pairs beyond the internal and external RAID controller pairs included within the scope of the prerequisite YT-VISIT-B1 on the same single AlphaServer GS1280 platform. The following services are included in the optional YT-VISIT-R1 Extra RAID Pair Service per each additional pair of Intelligent RAID controllers configured:	YT-VISIT-R1
	Technical edit of order to guide component selection and option placement Configuration of the disks of the additional controller pair per customer specifications Hardware configuration verification Custom disk placement and verification Installation of current revisions of firmware Configuration, exercise and testing of up to one pair of additional intelligent array controller pair and associated disk drives for each YT-VISIT-R1 Controller and disk testing with the system and its components during the100-hour burn-in

Clustering Service	Configuration of a single cluster instance for AlphaServer GS1280 platforms. This is a per-cluster service and is ordered along with the prerequisite YT-VISIT-B1 services.	YT-VISIT-C1
	Technical edit of order to guide component selection and option placement Configuration of a cluster per specifications Hardware and software configuration verification Installation of either Tru64 UNIX TruCluster software or OpenVMS cluster software and configuration of node functions Installation of current revisions of firmware Cluster failover testing with the system and its components during the full 100-hour burn-in

Partitioning Service	Configuration of multiple, non-clustered instances of a second or subsequent operating system on a single AlphaServer GS1280 platform. This is a per-partition service and is ordered along with the prerequisite YT-VISIT-B1 services. The first instance of an operating system is included in the YT-VISIT-B1 service, subsequent partitions require the YT-VISIT-P1 partitioning service.	YT-VISIT-P1
	Technical edit of order to guide component selection and option placement Configuration and hardware integration of the server partition per specifications Software load of either Tru64 UNIX operating system or OpenVMS operating system on a hardware/software partition. Partition testing with the system and its components during the full 100-hour burn-in

Full Custom Configurations

The Integration Service Packages address the most-common customer requirements. For a wider range of configurations, customers can also choose additional customized services based upon a Statement of Work agreement. This includes: cluster add-on nodes, larger storage configurations, custom option support, custom system packaging, mixed operating system partitions, and configured multi-system clusters. Contact your local sales representative for these services.

Upgrades

Step 18 - AlphaServer GS1280 System Hardware Upgrade

One AlphaServer GS1280 Model 8 system can be upgraded to an AlphaServer GS1280 Model 16 by ordering one 3X-BA65B-AA Upgrade Kit
Two AlphaServer GS1280 Model 8 systems can be upgraded to an AlphaServer GS1280 Model 16 by ordering one 3X-BNPSB-02 Upgrade Kit

GS1280 Model 8 to Model 16 Upgrade Kits	System expansion hardware to upgrade an AlphaServer GS1280 Model 8 to an AlphaServer GS1280 Model 16. Includes one System Building Block Drawer with one power shelf with three power supplies; one rackmount slide kit; and associated inter-processor cabling. NOTE: Requires the purchase of one PDU – see Step 7.	3X-BA65B-AA
	System expansion hardware to upgrade two AlphaServer GS1280 Model 8 systems to an AlphaServer GS1280 Model 16 system.	3X-BNPSB-02

HP Care Pack Services for Expansion from GS1280 Model 8 to Model 16
Model/HP Care Pack Priority Service	Principal Server 1 year	Principal Server 3 years	Subsequent Systems 1 year	Subsequent Systems 3 years
AlphaServer GS1280 Model 8P Expansion
HP Support Plus	FP-W01BA-12	FP-W01BA-36	FP-W21BA-12	FP-W21BA-36
HP Support Plus 24	FP-W02BA-12	FP-W02BA-36	FP-W22BA-12	FP-W22BA-36
Installation	FP-WINST-BU	FP-WINST-BU	FP-WINST-BU	FP-WINST-BU
Installation and Startup	FP-WSTAR-BU	FP-WSTAR-BU	FP-WSTAR-BU	FP-WSTAR-BU

TechSpecs

AlphaServer GS1280 Model 8	North America	Japan	Europe
Power Requirements
Voltage	120/208	200	380/415
Phase/Frequency	3W+G, 50-60 Hz	3W+G, 50-60 Hz	3W+N+G, 50-60 Hz
KVA, Model 8, 2 I/O Drawers, 4 SW Shelves	6.083	6.083	6.083
Power Plug, 1 required; 2 for dual AC	L21-30P, Hubbell 2811	L21-30P, Hubbell 2811	IEC 32A, Hubbell 532P6W
PDU, 1 required; 2 for dual AC	3X-H7606-AA	3X-H7606-AA	3X-H7606-AB
Rated Current, each PDU	24A	24A	24A
Typical Current, each PDU	18.5A	19A	10A
Internal Power Outlets	3 x C19, 24 x C13	3 x C19, 24 x C13	3 x C19, 24 x C13
Line Connection	fixed cord & plug	fixed cord & plug	fixed cord & plug
Power Cord	5 x 10AWG	5 x 10AWG	5 x 4 mm2
Power Plug	L21-30P, Hubbell 2811	L21-30P, Hubbell 2811	IEC 32A, Hubbell 532P6W
Main Breaker	30A	30A	30A
Sub-breakers	3 x 20A(2p), 1 x 20A(3p)	3 x 20A(2p), 1 x 20A(3p)	3 x 15A(2p), 1 x 15A(3p)
Agency	UL Listed, cUL	UL Listed, cUL	TUV & CB report

Physical Characteristics
Dimensions (H x W x D)	79 x 24 x 47 in (200 x 60 120 cm)	79 x 24 x 47 in (200 x 60 120 cm)	79 x 24 x 47 in (200 x 60 120 cm)
Shipping dimensions (H x W x D)	85 x 36 x 56 in (217 x 92.5 142 cm)	85 x 36 x 56 in (217 x 92.5 142 cm)	85 x 36 x 56 in (217 x 92.5 142 cm)
Service Clearance
Front	39.4 in (100cm)	39.4 in (100cm)	39.4 in (100cm)
Sides	0	0	0
Rear	31.5 in (80cm)	31.5 in (80cm)	31.5 in (80cm)
Installed Weight	1,240 lb (563 kg)	1,240 lb (563 kg)	1,240 lb (563 kg)
Heat Dissipation (Watts/Btu/hr)
Max Heat Output, Model 8 only, watts	3,405	3,405	3,405
Max heat Output, Model 8 only, Btu/hr	11,622	11,622	11,622
Typical Heat Output, Model 8 only, watts	2,430	2,430	2,430
Typical Heat Output, Model 8 only, Btu/hr	8,297	8,297	8,297
Max Heat Output, Full Rack	6,405	6,405	6,405
Max Heat Output, Full Rack, Btu/hr	21,861	21,861	21,861
Typical Heat Output, Full Rack, w	3,330	3,330	3,330
Typical Heat Output, Full Rack, Btu/hr	11,366	11,366	11,366
Airflow, cfm, minimum full rack	850	850	850
Airflow, cfm, maximum full rack	1,210	1,210	1,210
Environmental	Operating	Non-operating
Temperature	41 to 95° F (10 to 35° C)	-40 to 151° F (-40° to 66° C)
Relative Humidity (non-condensing)	10 to 90%	10 to 95%
Maximum Altitude	10,000 ft (3,050 m)	40,000 ft (12,200 m)
Shock	5G 30ms, half sine
Acoustics (Declared values per ISO 9296 and ISO 7779)		Idle/Operating	(Bystander pos.)
Part	Description	LwAd, B	LpAm, dBA
GS1280 Model 8	GS1280 Model 8 + 1 I/O Master Drawer	7.4	55
GS1280 System Building Block	1 x 8P System Drawer	6.8	50
GS1280 System Building Block	Power shelf with 3 PSU	6.7	48
3X-BA70A-BA	I/O Expansion Drawer	7.1	51
DS-SL13R-xx	StorageWorks Shelf	6.9	53
NOTE: Current values for specific configurations are available. 1 B = 10 dBA

AlphaServer GS1280 Model 16	North America	Japan	Europe
Power Requirements
Voltage	120/208	200	380/415
Phase/Frequency	3W+G, 50-60 Hz	3W+G, 50-60 Hz	3W+N+G, 50-60 Hz
KVA, Model 16, 2 I/O Drawers, 4 SW Shelves	12	12	12
Power Plug, 2 required; 4 for dual AC	L21-30P, Hubbell 2811	L21-30P, Hubbell 2811	IEC 32A, Hubbell 532P6W
PDU, 2 required; 4 for dual AC	3X-H7606-AA	3X-H7606-AA	3X-H7606-AB
Rated Current, each PDU	24A	24A	24A
Typical Current, each PDU	18.5A	19A	10A
Internal Power Outlets	3 x C19, 24 x C13	3 x C19, 24 x C13	3 x C19, 24 x C13
Line Connection	fixed cord & plug	fixed cord & plug	fixed cord & plug
Power Cord	5 x 10AWG	5 x 10AWG	5 x 4 mm2
Power Plug	L21-30P, Hubbell 2811	L21-30P, Hubbell 2811	IEC 32A, Hubbell 532P6W
Main Breaker	30A	30A	30A
Sub-breakers	3 x 20A(2p), 1 x 20A(3p)	3 x 20A(2p), 1 x 20A(3p)	3 x 15A(2p), 1 x 15A(3p)
Agency	UL Listed, cUL	UL Listed, cUL	TUV & CB report
Physical Characteristics
Dimensions (H x W x D)	79 x 24 x 47 in (200 x 60 120 cm)	79 x 24 x 47 in (200 x 60 120 cm)	79 x 24 x 47 in (200 x 60 120 cm)
Shipping dimensions (H x W x D)	85 x 36 x 56 in (217 x 92.5 142 cm)	85 x 36 x 56 in (217 x 92.5 142 cm)	85 x 36 x 56 in (217 x 92.5 142 cm)
Service Clearance
Front	39.4 in (100cm)	39.4 in (100cm)	39.4 in (100cm)
Sides	0	0	0
Rear	31.5 in (80cm)	31.5 in (80cm)	31.5 in (80cm)
Installed Weight	1,310 lb (594 kg)	1,310 lb (594 kg)	1,310 lb (594 kg)
Heat Dissipation (Watts/Btu/hr)
Max Heat Output, Model 16 only, watts	6,810	6,810	6,810
Max heat Output, Model 16 only, Btu/hr	23,243	23,243	23,243
Typical Heat Output, Model 16 only, watts	3,700	3,700	3,700
Typical Heat Output, Model 16 only, Btu/hr	12,632	12,632	12,632
Airflow, cfm, minimum full rack	1,500	1,500	1,500
Airflow, cfm, maximum full rack	2,200	2,200	2,200
Environmental	Operating	Non-operating
Temperature	41 to 95° F (10 to 35° C)	-40 to 151° F (-40° to 66° C)
Relative Humidity (non-condensing)	10 to 90%	10 to 95%
Maximum Altitude	10,000 ft (3,050 m)	40,000 ft (12,200 m)
Shock	5G 30ms, half sine
Acoustics (Declared values per ISO 9296 and ISO 7779)		Idle/Operating	(Bystander pos.)
Part	Description	LwAd, B	LpAm, dBA
GS1280 Model 16	GS1280 Model 16 + 1 I/O Master Drawer	7.6	57
3X-BA70A-BA	I/O Expansion Drawer	7.1	51
DS-SL13R-xx	StorageWorks Shelf	6.9	53
NOTE: Current values for specific configurations are available. 1 B = 10 dBA

© Copyright 2004 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
UNIX is a registered trademark or trademark of The Open Group in the U.S. and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

DA-11509 - U.S. - Version 25 - January 13, 2004