| March 1, 2007
- From Version 24 to 25 |
|
Changed |
|
Changes
made within the Standard Features, Configuration and Technical Specifications sections. |
|
| October 1, 2006
- From Version 23 to 24 |
|
Changed |
|
Changes
made within the Standard Features, Configuration and Technical Specifications sections. |
|
| July 12, 2006
- From Version 22 to 23 |
|
Changed |
|
Changes
made to Power Distribution Units in the Configuration Information section. |
|
| May 1, 2006 - From Version 21 to 22 |
|
Changed |
|
Changes
made to Electrical Characteristics in the TECHNICAL SPECIFICATIONS section. |
|
| April 7, 2006
- From Version 20 to 21 |
|
Changed |
|
Changes
made throughout the QuickSpec. NOTE that the title has changed. |
|
| March 20, 2006
- From Version 19 to 20 |
|
Changed |
|
Replaced
all occurrences of CPU(s) with processor(s). |
|
| January 4, 2006
- From Version 18 to 19 |
|
Added |
|
In the CONFIGURATION section,
added PCI 4-Gb Fibre Channel to the Mass Storage Host Bus Adapters. |
|
| December 1, 2005
- From Version 17 to 18 |
|
Added |
|
In the CONFIGURATION section,
added P/N's to "Internal Disk Drives" and "Internal Removable Media." |
|
| November 1, 2005
- From Version 16 to 17 |
|
Changed |
|
Minor
correction made to CONFIGURATION - Supported I/O Cards (HBA's). |
|
| September 12, 2005
- From Version 15 to 16 |
|
Changed |
|
Changes
made within the Supported I/O Cards sections only. |
|
| July 1, 2005 -
From Version 14 to 15 |
|
Removed |
|
Deleted
"MP failover (systems with both Core I/O boards)" from the Integrated
Multifunction I/O section. |
|
| May 31, 2005
- From Version 13 to 14 |
|
Added |
|
Added PA-8900 throughout the QS.
|
|
Changed |
|
Minor change
made to "High Availability" in STANDARD FEATURES. Changed product
numbers that are supported in "Memory DIMMs" - CONFIGURATION. |
|
| May 3, 2005
- From Version 12 to 13 |
|
Changed |
|
Reverted
QS back to previous version. |
|
| May 2, 2005
- From Version 11 to 12 |
|
Changed |
|
Changes
made throughout the QuickSpec. |
|
| April 1, 2005
- From Version 10 to 11 |
|
Added |
|
Added Supported I/O Cards (HBAs)
to the Configuration Section. |
|
| March 1, 2005
- From Version 9 to 10 |
|
Changed |
|
Changes
made in the Features, Configuration and Technical Specifications sections. |
|
| February 1, 2005
- From Version 8 to 9 |
|
Changed |
|
Changes
made in the Configuration section only. |
|
| January 3, 2005
- From Version 7 to 8 |
|
Changed |
|
Changes
made in the Configuration section only. |
|
| November 1, 2004
- From Version 6 to 7 |
|
Changed |
|
Changes
made in the Supported I/O Cards section of Technical Specifications only. |
|
| October 1, 2004
- From Version 5 to 6 |
|
Changed |
|
Changes
made in the Core I/O section of Technical Specifications. Also a change made to Standard
System Features. |
|
| September 1, 2004
- From Version 4 to 5 |
|
Changed |
|
Configuration |
|
Changes
to first paragraph of the Racking section only. |
|
| August 2, 2004
- From Version 3 to 4 |
|
Removed |
|
Configuration |
|
| Cell Boards |
A minimum of one and a maximum of
four cells can be ordered in an HP 9000 rp8420-32 Server. Each cell can be purchased with
up to four active dual core PA-8800 processor modules (eight processors), or in
combination with iCOD processors. Two processor speeds are supported; 900-MHz and 1.0-GHz.
The ability to mix PA-8800 processor speeds within a chassis is supported (but processors
within a cell or partition must be of the same speed). PA-8800 and PA-8700/PA-8700+
processors may not be mixed in the same server. The HP 9000 rp8420-32 Server (16 processor
module slots) and HP 9000 rp7420-16 (8 processor module slots) servers share the same cell
board. A processor module slot contains 1 dual core processor module (two processors). The
HP 9000 rp8420-32 Server cell board can be carried forward to the HP Integrity rx8620 and
supported Itanium processors in that chassis. The HP 9000 rp8400 cell board (A6096A) cannot
be carried forward to the HP 9000 rp8420-32 Server and must be replaced (although previous
HP 9000 rp8400 memory can be carried forward). When replacing previous HP 9000 rp8400 cell
boards in an upgrade situation, cell board and PA-8700/8700+ return credits may be used. |
|
|
| July 2, 2004 -
From Version 2 to 3 |
|
Added/Changed |
|
The
Upgrades section was completely revised. |
|
Changed
the mentions of L1 Cache to "L1 Cache (1.5MB/core)" |
|
Configuration |
|
Supported I/O Cards |
|
| I/O Card |
Product Number |
First HP-UX
Release |
Connector
Type(s) |
Hot-Plug Support |
Factory
Integration |
HP-UX Boot
Support |
Max Cards Per
System |
Max Ports Per
System |
| PCI-X 2Gb
Fibre Channel, 1000Base-T HBA |
A9784A |
11i |
|
Yes |
Yes |
Yes |
15 |
30 |
|
|
Removed |
|
Removed
all mention of L3 Cache from the QuickSpec. |
|
| May 3, 2004 - From Version 1 to 2 |
|
Removed |
|
Supported
I/O Cards (HBAs) |
|
"Special
Support Notes" has been removed. |
|
|
Changed/Added |
|
Supported
I/O Cards (HBAs) |
|
| I/O Card |
Product Number |
First HP-UX Release |
Connector Type(s) |
Hot-Plug Support |
Factory Integration |
HP-UX Boot Support |
Max Cards Per System |
Max Ports Per System |
| Local Area Network Interface
Cards |
|
|
|
|
|
|
|
|
| PCI-X 2-port
1000Base-SX Gigabit adapter |
A7011A |
11i |
|
Yes |
Yes |
Yes |
16 |
32 |
| PCI-X 2-port
1000Base-T Gigabit adapter |
A7012A |
11i |
|
Yes |
Yes |
Yes |
16 |
32 |
| Combination Cards |
|
|
|
|
|
|
|
|
| Dual Ultra2 LVD/SE SCSI/Dual
100Base-T |
A5838A |
11.00 |
VHDCI/
RJ-45 |
Yes |
Yes |
No |
16 |
64 |
| PCI 2-port 100Base-T
2-port Ultra2 SCSI |
A5838A |
11.00 |
VHDCI/
RJ-45 |
Yes |
Yes |
Yes |
16 |
64 |
|
|