2.

• New Processors
  • Dual-Core 64-bit Intel® Xeon® Processor 7140M (3.40GHz, 150 Watts, 800MHz FSB, 16 MB L3 Cache)
  • Dual-Core 64-bit Intel® Xeon® Processor 7130M (3.20GHz, 150 Watts, 800MHz FSB, 8 MB L3 Cache)
  • Dual-Core 64-bit Intel® Xeon® Processor 7120M (3.00GHz, 95 Watts, 800MHz FSB, 4 MB L3 Cache)
  • Dual-Core 64-bit Intel® Xeon® Processor 7110M (2.60GHz, 95 Watts, 800MHz FSB, 4 MB L3 Cache)
• Higher Capacity Internal Drive Support
  • Second generation small form factor (SFF) SAS hard disk drives with double the capacity of current SFF SAS drives up to 146GB
  • Internal mass storage capacity up to 1.168TB (8 x 146GB hot plug SFF SAS drives)

The HP ProLiant DL580 G4 Server can support up to two x4-x8 PCI Express bus expander boards. The bus expander can only be installed in expansion slots 5 and 7 to convert the adjacent lower-numbered expansion slot to a PCI Express x8 expansion slot. For example, installing the board into expansion slot 5 converts expansion slot 4 to a PCI Express x8 expansion slot.

Integrated Lights-Out (iLO 2) Management 2 (integrated on motherboard)

• Virtual Text Remote Console (pre-OS only)
• Remote Serial Console
• Virtual Power Button Control
• Virtual Unit ID control
• Integrated Remote Console (ActiveX Control client)
• Dedicated & full function shared network connectivity with VLAN
• Embedded system health
• Present power consumption
• Browser, command line and scripted access
• Automatic IP Configuration via DHCP/DNS/WINS
• Industry Standard 128-bit Secure Sockets Layer (SSL) and Secure Shell security (SSH)
• Advanced Encryption Standard (AES)/Triple Data Encryption Standard (3DES)
• OS independent hardware health status
• IML and iLO Event Logging
• Support for 12 user accounts with customizable access privilege

• Standard on 2P Models, optional with others
• Battery charge/life: Up to 72 hours/3 years
• Transportable data protection
• Increases overall controller performance

HP Insight Control Environment delivers foundation management, including remote monitoring, hardware resource deployment, health monitoring, software version control, performance monitoring, vulnerability scanning and patch management, and power management.
HP Insight Control Environment installs and licenses the following components by default using a wizard-based integrated installer:

• HP Systems Insight Manager
• HP iLO Advanced Pack
• HP Rapid Deployment Pack
• HP Insight Power Manager
• HP Performance Management Pack
• HP Vulnerability and Patch Management Pack

Additional ProLiant Essentials software and management tools included on the Insight Control Management kit can be installed manually

• HP Server Migration Pack - Universal Edition
• HP Open Service Event Manager
• HP Instant Support Enterprise Edition

NOTE: Server Migration Pack - Universal Edition can be installed from the SMP Universal CD included in the Insight Control Management media kit.
NOTE: For additional product and licensing information about HP Insight Control Environment, visit: http://www.hp.com/go/ice.

HP Insight Control Environment for Linux (ICE-Linux) provides comprehensive discovery, imaging & deployment, monitoring, and management for Linux-based ProLiant server platforms. Built on the industry-leading HP Systems Insight Manager framework, this solution integrates open source technology with experience leveraged from HP's Linux products in HP ICLE and HP XC Clusters, while providing paths to the future with developing management technologies.

HP Insight Control management suites and most HP ProLiant Essentials include a one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: http://www.hp.com/services/insight.

Upgrading, replacing, or virtualizing your existing server? Effortlessly transition to new virtual or physical HP ProLiant servers or BladeSystem with automated, accurate and affordable migration of OS, application and data. SMP Universal automates the manual processes required for migrating servers between physical or virtual platforms, whether migrating to VMware or Microsoft virtual machines. SMP Universal allows all of the following migrations:

• physical to ProLiant
• physical to virtual
• virtual to virtual
• virtual to ProLiant

NOTE: For more information, visit: http://www.hp.com/go/migrate.

The Insight Management Agents should be installed on all HP servers to present system instrumentation, health and configuration information into HP Systems Insight Manager and the HP System Management Homepage. The HP System Management Homepage aggregates systems data from Insight Management Agents and other HP management tools, providing a consolidated browser-based interface for managing individual servers.

Insight Management Agents and The HP System Management Homepage are included on ProLiant Support Packs, and can also be installed using the server profiles provided with the ProLiant Essentials Rapid Deployment Pack.

For additional information about the Management Agents and the HP System Management Homepage please visit the management Web site at: http://www.hp.com/servers/manage.

HP Serviceguard for Linux is a high availability clustering solution designed to protect applications and services from a wide variety of software and hardware failures, monitoring the health of each server (node) and quickly responding to failures such as those that affect system processes, system memory, LAN media and adapters, and application processes.

The following is a quick summary of HP Serviceguard for Linux features and support. For the most recent list of Linux distributions & kernels, servers and storage supported with Serviceguard for Linux, see the Serviceguard for Linux Certification Matrix, available at: http://www.hp.com/go/sglx/info.

• Supported Linux Distributions:
  • Red Hat EL 4
  • Red Hat EL 5
  • SUSE SLES10
• Supported Server Platforms
  • HP Integrity
  • HP ProLiant
  • Selected 3rd party x86 class servers
• Physical and virtual server support
• Application Integration Toolkits
  • Oracle Single Instance Database
  • Serviceguard Extension for SAP for Linux (SGeSAP/LX)
  • Other Application Integration Toolkits for sendmail, MySQL and more are free to download at: http://www.hp.com/go/softwaredepot/ha
• Disaster Tolerant Solutions
  • Serviceguard for Linux Extended Distance Cluster (XDC) extends cluster distances up to 100 km, utilizes software RAID mirroring for data replication and is storage array independent
  • HP StorageWorks XP/EVA Cluster Extension Software for Linux (CLX) works seamlessly with HP Serviceguard for Linux, HP StorageWorks Continuous Access, and HP Disk Arrays to automate failover and failback between sites
• Software updates are distributed by HP Services to customers with support contracts
  NOTE: For additional information on HP Serviceguard for Linux, visit: http://www.hp.com/go/sglx or see the HP Serviceguard for Linux QuickSpecs.

NOTE: HP Serviceguard for Linux products for HP ProLiant and select 3rd party x86 class servers include one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: http://www.hp.com/services/swsupport.

HP Advanced Memory Protection Technology - delivers unsurpassed memory protection and server availability with the following supported modes of operation:

• Advanced ECC (1 or More Memory Boards)
  Advanced ECC Memory is the default memory protection mode for the HP ProLiant DL580 G4. In Advanced ECC, the server is protected against correctable memory errors. The server will provide notification if the level of correctable errors exceeds a predefined threshold rate. The server does not fail because of correctable memory errors.
  Advanced ECC provides additional protection over Standard ECC in that it is possible to correct certain memory errors that would otherwise be uncorrectable and result in server failure. Whereas Standard ECC can correct single-bit memory errors, Advanced ECC can correct single-bit and multi-bit memory errors if all failed bits are on the same DRAM device on the DIMM. Advanced ECC is the only mode in which hot-add operations are supported by adding a memory board with memory to the server while it is running.
  
• Online Spare Memory (1 or More Memory Boards)
  Offers a higher level of memory protection than Advanced ECC alone. If the number of single-bit correctable errors on a bank exceeds the pre-defined error threshold, that bank will fail over to the online spare bank without intervention or server interruption. The failed memory can then be replaced at the user's convenience during a scheduled maintenance window.
  Online Spare Memory is achieved by protecting active memory with online spare memory on the same memory board. No operating system support is required.
  
• Hot Plug Mirrored Memory (2 or 4 Memory Boards)
  Hot Plug Mirrored Memory provides a higher level of availability than Advanced ECC and Online Spare Memory. With Hot Plug Mirrored Memory, the server is protected against uncorrectable memory errors that would otherwise result in server failure. Hot Plug Mirrored Memory allows the server to keep two copies of all memory data on separate memory boards. If an uncorrectable error is encountered, the proper data is retrieved from the memory board that did not fail. In addition, Hot Plug Mirrored Memory allows failed or degraded DIMMs to be replaced while the server is running without requiring server downtime. The memory board with the failed DIMMs can be removed from the front of the server, failed DIMMs replaced, and the board re-inserted into the server without disengaging the server from the rack or interrupting the operating system.
  
• Hot Plug RAID Memory (4 Memory Boards)
  Hot Plug RAID Memory provides a similar level of protection as Hot Plug Mirrored Memory but obtains this protection using a smaller percentage of the installed memory. While Hot Plug Mirrored Memory keeps two copies of all memory data, Hot Plug RAID Memory keeps only one copy of all memory data and additional parity information. If an uncorrectable memory error is encountered, the server can create the proper data using data from the parity information and the other memory boards that contain no failures. In a Hot Plug RAID Memory configuration, 75% of the installed memory is available to the Operating System; 50% more than in a Hot Plug Mirrored Configuration. As with Hot Plug Mirrored Memory, Hot Plug RAID Memory allows failed DIMMs to be replaced while the server remains running and safely engaged in the rack.
  

• PCI-X Hot Plug Technology (Two 64bit/133-MHz PCI-X hot plug slots available with the Hot Plug PCI-X Mezzanine Option).
  
• Smart Array P400 Controller with optional Battery Backed Write Cache (BBWC) Enabler provides transportable data protection and increases overall controller performance. Up to 512MB Battery Backed Write Cache protection optional on HP ProLiant DL580 G4 (512MB BBWC ships standard with 2P models).
  
• Hot Plug Redundant Fans - Six Hot Plug Redundant Fans ship standard with all models.
  
• Front Accessible Chassis - Redesigned chassis allows access to memory, processors and hard drives from the front of the server while it remains safely engaged in the rack. This provides easier serviceability and lowers the chance of interfering with neighboring servers' cables and components.
  
• Hot Plug Universal Drives - Up to eight Hot Plug Universal SFF SAS drives are supported.
  
• Hot Plug Redundant Power Supplies - Two Hot Plug Redundant Power Supplies ship standard with all 2P High Performance Models (2nd Hot Plug Redundant Power Supply is optional with 1P base models).
  

• Front and Rear accessibility provides unsurpassed serviceability by allowing the server to remain safely secured in the rack while maintaining Hot Plug RAID Memory, Hot Plug Universal Hard Drives, Hot Plug Redundant Power Supplies, as well as Processors and Processor Power Modules.
• Innovative Diagnostic Lighting
• Systems Insight Display - precisely depicts all major subsystems of the server (PCI I/O, Memory, CPU, Redundant Cooling, Interlock, Thermtrip) and gives instant visual indication of fault status. Located on top front of server.
• LED display on front panel indicates power, internal health, external health, Unit ID light.
• LED display on Memory board indicates Memory status, health, and protection mode.
• LED display on Processor board indicates Processor and Processor Power Module health.
• Tool-less, virtually cable-less interior design
  • Tool-less access to interior of server
  • Up to two, Slimline media drives are removable without the use of tools (ejectable)
  • Rear Access to Hot Plug Redundant Power Supplies
  • PCI Card Guides locks full length PCI cards in place
  • Six individually removable fans connect without cables to the system board
  • Processor/PPM Retention Cage securely locks Processors into their sockets
  • Tool-less removal of system board
• Quick Deploy Rails
• Tool-less design "snap in" rail and ambidextrous cable management arm

HP ProLiant DL580 G4 rack models provide tool-free support for racks with square or round mounting holes (including Compaq/HP 7000, 9000, 10000, HP/E series and H9 series) with an adjustment range from 24" - 36" in depth. The ambidextrous cable management arm can be mounted on either the left or right side for improved cable management.
NOTE: Cable management arm must be removed to access Hot Plug Power Supplies when the cable management arm is mounted on the right.

HP ProLiant DL580 G4 in Telco Racks
Support for all 2-post Telco racks requires the use of the standard rack kit and an additional option kit from Rack Solutions (http://www.racksolutions.com/hp/)

The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.
http://www.hp.com/products/configurator.

HP Care Pack services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server and purchased at the same time or afterward that are internal to the enclosure. This also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included, and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalizing on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions, provides a range of support services designed to meet the varying needs of your business. Whether an SMB, or large global corporation, HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service - simplify ProLiant solution implementation, maintenance, and management.

• Support: 3-Year 4-Hour response 24x7 Same Business Day Coverage only
  
• Deployment Service: Installation and Start up only

Enhanced Service - optimize service level to increase IT performance and availability.

• Support: 3-Year Support Plus 24 only

Refer to the information on "Installation & Start-Up" for service on ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet; to be delivered on a scheduled basis 8am-5pm, M-F, excluding HP holidays.

NOTE: For a complete listing of service offerings and information visit:
http://www.hp.com/services/proliantservices
http://www.hp.com/go/proliant/carepack

The HP ProLiant DL580 G4 server is an enterprise class, 4-processor server designed for maximum scalability and high availability. It's radically redesigned chassis offers unsurpassed flexibility and serviceability in a versatile, rack-optimized form factor.
Based upon the latest industry standard processing, memory, I/O and networking technologies, the HP ProLiant DL580 G4 provides the highest levels of performance demanded by today's compute intensive applications. Unparalleled high availability features, including Hot Plug RAID Memory technology, an integrated Smart Array P400 controller, and hot-plug redundant components guarantee maximum uptime. The HP ProLiant DL580 G4's Integrated Lights-Out 2 technology, allows remote administration from a standard web-browser without ever having to visit the server. Within the 4U dense form factor, the HP ProLiant DL580 G4's highly expandable architecture provides maximum application deployment flexibility with the ability to add PCI-Express, hot plug PCI-X or battery-backed write cache options. Innovative new features, such as the ability to access processors, memory, hard drives, and power supplies while the unit remains secured in the rack, enable rapid response to service events, radically decreasing overall IT costs and server downtime.

Typical Usage:

Space-constrained corporate data centers and service providers

• With up to 1.168TB of internal storage, 16 DIMM sockets and PCI-Express or hot-plug PCI-X mezzanine options; the HP ProLiant DL580 G4 packs the storage, memory, and I/O you need in a versatile, 4U chassis
• Ambidextrous cable management and a quick deploy rail solution make racking a snap
• Availability features including hot plug RAID memory, hot plug redundant power, hot plug redundant fans, hot plug PCI-X and hot plug RAID hard drives keep environments up and running and users productive

Database, Messaging and Business Applications

• The latest 64-bit Intel® Xeon® processors with Hyper-Threading, DDR-2 memory, and large internal storage capacity provide scalability for everything from web apps to mail servers to databases
• Four standard PCI-Express x4 slots and one standard full-length PCI-X slot and the ability to add either two additional X4 PCI Express, one additional X8 PCI Express, or two additional hot plug PCI-X slots, provide powerful and flexible I/O alternatives
• Two integrated multi-function gigabit NICs give you the connectivity and bandwidth needed in today's database or business applications environments
• Easily attach to SAN or NAS and manage from one location

Server Consolidation

• Scalability, availability and built-in serviceability make the HP ProLiant DL580 G4 the perfect platform for server consolidation solutions
• The ProLiant HP DL580 G4 and ProLiant Essentials make it easy to deploy, manage, and migrate virtualized servers with VMware or Microsoft Virtual Server
• Integrated Lights-Out 2 enables administrators to manage the HP ProLiant DL580 G4 from remote locations

For more solutions visit: http://www.hp.com/solutions/proliantdl580.

NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section.

HP DL580 G4 High Performance Models

HP DL580R04 X7140M 4GB P400 DC 2P
430808-001

HP DL580R04 X7130M 4GB P400 DC 2P
430809-001

HP DL580R04 X7120M 2GB P400 DC 1P
430810-001
HP DL580R04 X7110M 2GB P400 DC 1P
430811-001

The HP ProLiant DL580 G4 Performance Packs include the latest performance technologies and enterprise class availability features pre-installed for convenience and value. In addition to the standard features listed in Step 1, the Performance Packs include the following:

• 2nd Intel® Xeon® Processor and Processor Power Module
• 2nd Rear Accessible Hot Plug Redundant Power Supplies

HP Insight Control Environment, No Media 1-Server License including 1 year of 24x7 Technical Support and Updates
NOTE: This part number can be purchased as a single license or as multiple licenses with a single activation key. Customer will receive a license entitlement certificate via e-mail. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service. Only available directly from HP and select resellers in the Americas region.

NOTE:  Please see the SAS Hard Drive QuickSpecs for Technical Specifications such as capacity, height, width, interface, transfer rate, seek time, physical configuration, and operating temperature:
http://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.html

AG072A

Standard Memory

Standard Memory Board (Slots)

1

2

3

4

1

2

3

4

1

2

3

4

1

2

3

4

Optional Memory Summary

Standard Memory Board (Slots)

1

2

3

4

Maximum Memory Summary

Standard Memory Board (Slots)

1

2

3

4

Standard Memory

Standard Memory Board (Slots)

1

2

3

4

1

2

3

4

1

2

3

4

1

2

3

4

Optional Memory Summary

Standard Memory Board (Slots)

1

2

3

4

Maximum Memory Summary

Standard Memory Board (Slots)

1

2

3

4

The following memory options are available from HP:

8 GB (2 x 4 GB 2RANK) PC2-3200 Registered Memory (DDR2-400) Option Kit

4 GB (2 x 2 GB 2RANK) PC2-3200 Registered Memory (DDR2-400) Option Kit
NOTE: With Advanced ECC and online spare memory capabilities. 2GB 2RANK DIMM's are recommended with the HP ProLiant DL580 G4. However, 2GB 1RANK DIMM's are also supported for commonality with other HP ProLiant servers.

4 GB (2 x 2 GB 1RANK) PC2-3200 Registered Memory (DDR2-400) Option Kit
NOTE: With Advanced ECC and online spare memory capabilities.

2 GB (2 x 1 GB 1RANK) PC2-3200 Registered Memory (DDR2-400) Option Kit
NOTE: With Advanced ECC and online spare memory capabilities.

1 GB (2 x 512 MB 1RANK) PC2-3200 Registered Memory (DDR2-400) Option Kit
NOTE: With Advanced ECC and online spare memory capabilities.

DL580 G4 Memory Expansion Board
NOTE: The HP ProLiant DL580 G4 utilizes up to four Memory Expansion Boards that support up to four DIMMs each. These memory boards are Front accessible providing unsurpassed levels of memory protection as well as scalability for the most memory-intensive applications. See Memory Configuration Diagram.
NOTE: One Memory Expansion Board ships standard with 1P base models and two Memory Expansion Boards ship standard with 2P High Performance models.

1

2

Slimline Drives (ejectable)

External Storage

Modular Smart Array 30 Family

Up to 28

External

Maximum Storage Capacity - (External SAS Enclosure Attached)

Internal

Efficiency (%)

Leakage Current (mA)

Maximum Inrush Current duration

System Unit Rack

Chassis Footprint (HxWxD)

6.94 x 19 x 26.5 in (17.6 x 48.3 x 67.3 cm)

Weight
No hard drives installed,
one power supply

Input Requirements

Relative Humidity
(non-condensing)

Maximum Wet Bulb Temperature

(HxWxD, maximum)

Applicable Disk

DVD-ROM

DVD-R (Read Only)

2.6 GB/side DVD-RAM (Read Only)

5.2 GB/side DVD-RAM (Read Only)

CD-ROM Mode-1 data disc

Capacity

DVD-ROM

Diameter

120 mm (4.7 in), 80 mm (3.1 in)(with adapter at vertical mounting mode)

Tray type

EIDE (ATAPI)

Random

DVD-ROM < 120 ms, CD-ROM < 110 ms

Full-Stroke

DVD-ROM < 240 ms, CD-ROM < 160 ms

Line-out

CD 0.7 Vrms at 47 Kohms Load

DVD-ROM

Single Layer

CD-ROM

7.2 MB/sec. Max.

2 MB

less than 10 seconds

120,000 Power On Hours (POH)

Operating

-22° to 140° F (-30° to 60° C)

Operating

10% to 80%

Storage/Transportation

(HxWxD, maximum)

0.5 x 5.04 x 5.1 in (12.7 x 128 x 129.4 mm)

iLO 2 Advanced Features (optional)

Smart Array P400 Controller

Two embedded NC371i Multifunction Gigabit Server Adapters

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.