• Dual-Core Intel® Xeon® Processor E6400 (2.13 GHz, 1066MHz Front Side Bus (FSB)), 2MB L2 Cache
• 1TB SATA and SAS drives allow up to 14TB of hard drive space

• Processors:
  • Dual-Core Intel® Xeon® Processor E6400 (2.13 GHz, 1066MHz Front Side Bus (FSB)), 2MB L2 Cache
  • Intel® 3010 Chipset with up to 1066 MHz FSB
• Memory:
  • Supports up to 8 GB of PC2-5300 (667 MHz) Unbuffered DDR2 ECC SDRAM Memory
  • 4 DIMM sockets
• Storage Controller: (occupies x8 slot)
  • HP Smart Array P400/256 MB Controller (RAID 0/1/5/6) (occupies x8 slot)
    NOTE: Includes BBWC.
• Internal Drive Support:
  • Up to fourteen (12 in front/2 in rear 3.5" (Large Form Factor) SATA or SAS hard drives
  • Internal storage capacity of up to 14TB
  • Optional rear Slimline CD-RW/DVD-ROM 24X Combo Drive for internal DVD drive configuration
• Network Controller:
  • Embedded NC324i PCIe Dual Port Gigabit Server Adapter
• Expansion Slots:
  • (2) Expansion Slots: Two PCI Express (X8 connectors, x8 and x1)
• USB 2.0 Ports:
  • Four Total: (2) internal; (2) rear
• Redundancy:
  • Hard drives- Hot-plug SAS/SATA
  • Power - Hot plug, redundant standard
  • Fans - N+1 redundant, non-hot plug
• Management:
  • HP Insight Control suite delivers essential management, including proactive health management, lights out remote control, optimization of power usage, rapid server deployment, performance analysis, vulnerability scanning and patch management and virtual machine management. For more information, go to: www.hp.com/go/ice.
  • HP ProLiant Onboard Administrator (powered by the Integrated Light-Out 2 management processor) for simplified server setup, health monitoring and recovery, power and thermal control, and lights-out remote administration
  • Integrated Lights-Out 2 Advanced unlocks the full capabilities of the ProLiant Onboard Administrator with high performance Integrated Remote Console, multi-user console sharing, video record and replay, and virtual media, including virtual folders for rapid server updates.
• Form Factor:
  • Height - 2U Rack, Length - 24.5"
• Deployment/Serviceability:
  • Rails - MSA universal rail kit
  • Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement
• Warranty:
  • This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Expanded support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. SATA hard drives have a one-year warranty.
    NOTE: Server Warranty includes three year parts, one year labor, and one year on-site support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

None ship standard

HP Insight Control suite delivers essential infrastructure management, including proactive health management, lights out remote control, optimization of power usage, rapid server deployment, performance analysis, vulnerability scanning and patch management and virtual machine management.

HP Insight Control suite installs and licenses the following components by default using a wizard-based integrated installer:

• HP Systems Insight Manager (SIM)
• HP iLO Advanced Pack
• HP Insight Rapid Deployment software (RDP)
• HP Insight Power Manager (IPM)
• HP Insight Performance Manager module (PMP)
• HP Insight Vulnerability and Patch Manager module (VPM)
• HP Insight Virtual Machine Manager software for ProLiant (VMM)

Additional Insight software standalone products and management tools included on the Insight Software media kit can be installed manually

• HP Insight Server Migration software for ProLiant (SMP)
  NOTE: HP Insight Server Migration software for ProLiant is licensed separately from Insight Control suite.
• HP Open Service Event Manager
• HP Insight Remote Support Standard
• HP Insight Remote Support Advanced (previously Service Essentials Remote Support Pack)

NOTE: Insight Server Migration software for ProLiant can be installed from the SMP CD included in the Insight Software media kit.
NOTE: For additional product and licensing information about HP Insight Control suite, visit: http://www.hp.com/go/ice.

NOTE: As of Feb. 1, 2009, HP iLO Power Management Pack is being discontinued. Customers can either purchase HP Insight Control suite which contains all the components of IPMP or the standalone components which include iLO Advanced, Insight Power Manager and Systems Insight Manager.

HP Insight Control suite and most Insight software products include one year of 24 x 7 HP Software Technical Support and Update Service, to ensure rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: http://www.hp.com/services/insight.

HP ProLiant Onboard Administrator (powered by the Integrated Lights-Out 2 management processor) simplifies server setup, health monitoring, power and thermal control, and lights-out remote administration of ProLiant ML, DL, and BL servers. HP ProLiant Onboard Administrator functions without additional software, and can be accessed from any location via a web browser. It works hand-in-hand with HP Systems Insight Manager, Insight Control, and Insight Dynamics - VSE suite helping customers unlock the value of the ProLiant platform and deliver the highest possible quality of IT service to the business.

Capabilities of the HP ProLiant Onboard Administrator embedded in ProLiant ML/DL servers include, but are not limited to the following:

• Rom-based Setup Utility (RBSU) and Option Rom Configuration for Arrays (ORCA)
• IML and iLO event logging
• Automatic Server Recovery (ASR)
• OS independent hardware health status
• Present server power consumption
• Virtual Unit ID control
• Remote serial console
• Virtual power button control
• Dynamic Sector Repairing (with Smart Array controller)
• Drive Parameter Tracking (with Smart Array controller)
• Hot Spare Boot
  NOTE: Upon the event of a failed processor in a multi-processing environment, the system will automatically reboot and attempt to use the remaining good processor.

Unlock the full remote administration capabilities of HP ProLiant Onboard Administrator with Integrated Lights-Out 2 Advanced.

HP Systems Insight Manager (SIM)

HP Insight Rapid Deployment software (RDP)

HP Insight Server Migration software for ProLiant (SMP)

Upgrading, replacing, or virtualizing your existing server? Effortlessly transition to new virtual or physical HP ProLiant servers or BladeSystem with automated, accurate and affordable migration of OS, application and data. Insight Server Migration software for ProLiant (SMP) automates the manual processes required for migrating servers between physical or virtual platforms, whether migrating to VMware or Microsoft virtual machines. SMP allows all of the following migrations:

• physical to ProLiant
• physical to virtual
• virtual to virtual
• virtual to ProLiant

NOTE: For more information, visit: http://www.hp.com/go/migrate.

HP Integrated Lights-Out (iLO) Advanced Pack

Managing the growing number of servers can be complex and expensive for your organization. IT managers need to address changing business needs with tools that meet the challenges of managing today's complex Datacenters.

HP provides management solutions that are designed to simplify a server's installation, configuration and maintenance throughout the entire server lifecyle. This provides the customer with higher levels of operational efficiency and highly reliable systems: www.hp.com/go/foundation.

The foundation pack includes:

• HP SmartStart
• HP Management
• HP ProLiant Firmware Maintenance

SmartStart version supported (minimum): SmartStart 7.60
http://www.hp.com/servers/smartstart

The Insight Management Agents should be installed on all HP servers to present system instrumentation, health and configuration information into HP Systems Insight Manager and the HP System Management Homepage. The HP System Management Homepage aggregates systems data from Insight Management Agents and other HP management tools, providing a consolidated browser-based interface for managing individual servers.

Insight Management Agents and The HP System Management Homepage are included on ProLiant Support Packs, and can also be installed using the server profiles provided with the Rapid Deployment Pack.

For additional information about the Management Agents and the HP System Management Homepage please visit the management Web site at: http://www.hp.com/servers/manage.

Dual, Auto Ranging input, power factor corrected, 575W, high efficiency, redundant, 12V-47A, 5V-5A output, self cooled power supplies agency rated for worldwide use. Power supply fan controlled externally by enclosure with internal override for thermal protection. Bicolor LED to indicate fault, standby or power good. 3.8 lbs typical.

Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express.

The HP eConfigure-Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.
http://www.hp.com/products/configurator.

HP Care Pack Services provide total care and support expertise with committed response times designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22-inch and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalizing on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of support solutions provides a range of support services designed to meet the varying needs of your business. Whether an SMB, or large global corporation, HP has ProLiant server support offers to help you speedily deploy and maximize system uptime.

Recommended Service - simplify ProLiant solution implementation, maintenance, and management.

• Support - 3-Year 9x5 Next Business Day coverage, excluding HP holidays only
• Deployment Service - HW Installation only
  

Enhanced Service - optimize service level to increase IT performance and availability.

• Support - 3-Yyear 13x5 Same Business Day, 4-Hour response coverage only
• Deployment Service - Installation and Start up only
  

Refer to the information on the Installation of a ProLiant on the ProLiant Data Sheet; to be delivered on a scheduled basis 8am-5pm, M-F, excluding HP holidays. .

NOTE: For a complete listing of service offerings and information visit:
http://www.hp.com/services/proliantservices
http://www.hp.com/go/proliant/carepack

Rear Slimline CD-RW/DVD-ROM 24X Combo Drive

Standard

1 GB

Empty

Empty

Empty

1 GB

1 GB

2 GB

2 GB

Maximum

2 GB

2 GB

2 GB

2 GB

Following are memory options available from HP:

2 GB Unbuffered PC2-5300 ECC DIMM (1 x 2 GB)

432806-B21

1 GB Unbuffered PC2-5300 ECC DIMM (1 x 1 GB)

432804-B21

512 MB Unbuffered PC2-5300 ECC DIMM (1 x 512 MB)

HP StorageWorks SCSI Tape Drives, External
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-3 Ultrium 960
LTO-3 Ultrium 920
LTO-4 Ultrium 1760
LTO-4 Ultrium 1840
DAT 40
DAT 72
DAT 160
1U Rack-Mount Kit
3U Rack-Mount Kit

Embedded Network Controller

System Unit

Dimensions (H x W x D)
(with bezel)

3.5 x 19.2 x 23.5 in (8.8 x 48.8 x 59.7 cm)

Weight
(approximate)

Maximum
(all hard drives, power supplies, and processors installed)

Input Requirements
(per power supply)

Rated Line Voltage

Rated Input Current

Rated Input Frequency

Rated Input Power

Power Specifications

NOTE: To review typical system power ratings use the HP Power Advisor which is available online located at url: www.hp.com/go/proliant-energy-efficient or www.hp.com/go/hppoweradvisor

- Click on the system of interest. Example: DL320s
- Follow the instructions of the next screens.

Acoustic Noise

6.75 B

7.2 B

Power Supply

Input voltage specifications

Rated input voltage

Input Specifications

Rated input line

120/240 VAC

Frequency range

47-63 Hz

Rated input power

575 W

Rated input current

8.6 A Max

Steady state power

575 W

Relative humidity
(non-condensing)

Operating

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.