Overview

HP ProLiant ML110 Generation 4 (G4)

Front View:		Rear View:
1.	CD-ROM Drive	1.	Power Supply Outlet
2.	Power LED	2.	S/2 Mouse Port
3.	Drive Activity LED	3.	PS/2 Keyboard Port
4.	Well ventilated chassis design	4.	Serial Ports A,B
5.	Main System Board	5.	VGA Port
6.	HDD controller card (Optional)	6.	Rear USB 2.0 Ports
7.	HP LO 100c Management Card (Optional)	7.	LAN Port (RJ-45)
8.	Rear System Fan	8.	HP Lights-Out 100 Remote Management Card Port
9.	370W Power Supply

What's New

Processors:
- Dual-Core Intel® Pentium D Processor 935 (3.2 GHz, 800 MHz FSB)
- Dual-Core Intel® Pentium D Processor 945 (3.4 GHz, 800 MHz FSB)
Storage Controller:
- HP SC44Ge Host Bus Adapter
Communications:
- HP NC110T PCI Express Gigabit Server Adapter
Internal Storage:

Support up to 1.2TB SAS max storage (4 x 300 GB)

At A Glance

Processor:
- Dual-Core Intel® Xeon® processors 3000 sequence
- Dual-Core Intel® Pentium® D processors 800 or 900 sequence
- Single-Core Intel® Celeron® D processors
Memory
- 512 MB Standard / 8 GB Maximum of PC2-5300 DDR2 667 MHz ECC unbuffered Memory
Storage Controller:
- 4 Port SATA controller with Embedded RAID on Motherboard
- HP 8 Internal Port SAS HBA with RAID
Internal Drive Support:
- 4 HDD Support:
  - 2TB SATA max storage (utilizing 500GB CTO HDD)
  - 1.2TB SAS max storage (4 x 300GB)
Network Controller:
- Embedded NC320i PCIe Gigabit Server Adapter
Expansion Slots:
- Two 32-bit/33MHz PCI at 3.3V slot
- Two PCI-Express slots (x4 and x8, both in an x8 connector).
USB Ports:
- Six total USB ports (2 internal, 2 front, 2 rear)
Form Factor:
- Micro ATX tower
Management:
- Standard IPMI reporting
- Lights Out 100c Remote Management Card (Optional)
Warranty:
- Protected by HP Services and a worldwide network of HP Authorized Channel Partners, including a one-year, limited warranty, Next Business Day 1, year on-site limited Global warranty. Certain restrictions and exclusions apply. SATA hard drives have a one year warranty

Standard Features

NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA0-7780ENW.pdf
Processor One of the following depending on Model	Dual-Core Intel® Pentium® D Processor 945 (3.4 GHz, 800 MHz FSB)*
	Dual-Core Intel® Pentium® D Processor 935 (3.2 GHz, 800 MHz FSB)*
	Dual-Core Intel® Pentium® D processor 925 (3.0 GHz, 800MHz, FSB)
	Dual-Core Intel® Pentium® D processor 915 (2.8 GHz, 800MHz FSB)
	Dual-Core Intel® Pentium® D processor 820 (2.8 GHz, 800MHz FSB)*
	Dual-Core Intel® Xeon® processor 3050 (2.13 GHz, 1066MHz FSB)*
	Dual-Core Intel® Xeon® processor 3040 (1.86 GHz, 1066MHz FSB)
	Single-Core Intel® Celeron® D processor 352 (3.20 GHz, 533MHz FSB)*
	*Available through Configure To Order only. See Factory Integration Models section for more details.

Cache Memory One of the following depending on Model	1x2 MB shared Level 2 cache (Xeon sequence)
	2x2 MB Level 2 cache (Pentium D 900 sequence)
	2x1 MB Level 2 cache (Pentium D 800 sequence)
	512KB Level 2 cache (Celeron D)

Chipset	Intel 3000

Memory Protection	ECC

Memory	Type	PC2-5300 unbuffered DDR2 SDRAM (667MHz)
	Standard	512 MB
	Maximum	8 GB

Network Controller	Embedded NC320i PCIe Gigabit Server Adapter

Expansion Slots	Slot Number	Bus Speed	Hot Plug Y/N	PCI Voltage	Notes
	4	x8 PCI Express	No	n/a	Full Height
	3	x4 PCI Express	No	n/a	In a x8 slot Full Height
	1/2	32bit/33MHz PCI	No	3.3V	Full Height
	NOTE: Only one brace for full length cards provided.

Storage Controller One of the following depending on Model	Integrated 4 port SATA controller with embedded RAID

Storage	CD-ROM	48x IDE (ATAPI) CD-ROM Drive
	Hard Drives	SATA	160GB SATA 7200 rpm Drive
		SAS	72GB SAS 15,000 rpm Drive

Maximum Internal Storage	Type
	SAS (Not-hot plug)	1.2TB	(4x300GB)
	SATA (Non-hot plug)	2TB	(4 x 500GB*)
	*Available through Configure To Order only. See Factory Integration Models section for more details.

Interfaces	Parallel	0
	Serial	2
	Pointing Device (Mouse, PS2)	1
	Graphics	1
	Keyboard (PS2)	1
	USB	6 total (2 rear, 2 front panel, 2 internal (one for USB Tape connectivity)) NOTE: Internal USB ports are optimal for the attachment of HP USB DAT Tape Drives NOTE: Please see the following URL for additional information regarding USB support: http://h18004.www1.hp.com/products/servers/platforms/usb-support.html
	Network RJ-45 (Ethernet)	1
	Management	Optional Lights-Out 100c Remote Management port

Graphics	Integrated 2MB video controller

Form Factor	Micro ATX Tower (4U)

Industry Standard Compliance	ACPI V2.0 Compliant
	PCI 2.3 Compliant
	PXE Support
	WOL Support
	IPMI 2.0 compliance

Manageability	Embedded IPMI standard reporting Optional HP ProLiant Lights-Out 100c Remote Management Card

Security	Power-on password Setup password

Server Power Cords	12' lowline NEMA power cord.
	NOTE: Rack models ship standard with a 12' IEC cable. Most redundant power supply options ship with a 6' power cord.

Power Supply	370 Watts

System Fans	1 – non-redundant system fan shipped standard
	1 – non-redundant CPU heatsink fan shipped standard

OS Support	Microsoft Windows Server 2003: Standard & Enterprise Edition (32 and 64 bit) Microsoft Windows Small Business Server 2003 Microsoft Windows 2003 Server, Web Edition Microsoft Windows Server 2008 Novell NetWare 6.5 SBS (only after SP6 release) RedHat Enterprise Linux SUSE Linux Enterprise Server
	NOTE: For an up-to-date listing of the latest ML110 G4 OS support matrix, please see: http://www.hp.com/go/supportos NOTE: For an up-to-date listing of the latest software and drivers available for your server, please select your server: http://h20000.www2.hp.com/bizsupport/TechSupport/Product.jsp?lang=en&cc= us&taskId=135&prodTypeId=15351&prodCatId=241435 NOTE: Drivers may also found on the base media for some Linux OS's. When configuring your server, please consult your base media driver base, or visit HP.com at: http://h18023.www1.hp.com/support/files/server/us/index.html NOTE: For more Linux OS support & certification information, please visit our the ProLiant & Bladesystem Server Linux matrix: http://h18004.www1.hp.com/products/servers/linux/hpLinuxcert.html NOTE: When installing a Windows OS Environment and configuring the embedded SATA RAID, AHCI, or SAS controllers, installation of a driver from a diskette device is required. The optional USB floppy drive (part number DC361B) is required on the ML110 G4 to accomplish this operation. NOTE: Netware 6.5 SP6 is not supported with the embedded SATA RAID.

Factory Express Portfolio for Servers and Storage

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and/or storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging and custom packaging HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers, as well as, the MSA1000, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to http://www.hp.com/go/factory-express.

HP Enterprise Configurator	The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.

Service and Support

This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Additional support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack services or customized service agreements.

NOTE: Server Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support with next business day response. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service - Simplify ProLiant solution implementation, maintenance and management.

Support Service -3 Year, 9x5 Next Business Day coverage, excluding HP holidays only
Deployment Service - Hardware Installation only

Enhanced Service - Optimize service level to increase IT performance and availability

Support Service - 3 Year 13x5 Same Business Day, 4-Hour response coverage
Deployment Service - Installation and Start-up only

Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.

For a complete listing of service offerings and information visit:
http://www.hp.com/services/proliantservices
http://www.hp.com/go/proliant/carepack

Models

SATA Models
HP ML110G4 P925 512MB, NHP 160GB SATA (1P) 440288-001	Processor(s) One of the following depending on Model	One (1) Dual-Core Intel® Pentium® D Processor 925 (3.0 GHz, 800 MHz FSB)
	Cache Memory One of the following depending on Model	2 x 2MB Level 2 cache (Pentium 915 & Pentium 925) 1 x 2MB shared Level 2 cache (Xeon 3040)
	Memory	512 MB PC2-5300 ECC (DDR2-667Mhz) (1 x 512 MB)
	Storage Controller	HP Embedded 4 Port SATA Controller with embedded RAID
	Hard Drive	160GB SATA HDD
	Internal Storage	Maximum 1TB (4 x 250GB) SATA
	Optical Drive	48x CD-ROM
	Form Factor	Micro ATX Tower

SAS Models
HP ML110G4 3040, 512MB, NHP-SAS (1P) 432126-001	Processor(s) One of the following depending on Model	One (1) Dual-Core Intel® Xeon® 3040 Processor (1.86 GHz, 1066 MHz FSB)
	Cache Memory	1 x 2MB shared Level 2 cache (Xeon 3040)
	Memory	512 MB PC2-5300 ECC (DDR2-667Mhz) (1 x 512 MB)
	Storage Controller	HP 8 Internal Port SAS HBA with RAID (0,1)
	Hard Drive	72GB SAS HDD
	Internal Storage	Maximum 1.2TB (4 x 300GB) SAS
	Optical Drive	48x CD-ROM
	Form Factor	Micro ATX Tower

Configuration Information-Factory Integrated Models

NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis. NOTE: This product offering does not support HP Factory Express Server Configuration Level 1. NOTE: FIO indicates that this option is a Factory Installable Option. NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.
Step 1: Base Configuration
Models	HP ProLiant ML110 G4 Tower Chassis	417710-B21
	Factory Integrated Models ship with:
	Embedded NC320i PCIe Gigabit Server Adapter
	Keyboard and Mouse
	370 Watts, PFC (Power Factor Correcting)
	Tower Form Factor (4U)

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)
Processors	Single-Core Intel® Celeron® D processor 352 3.20 GHz/533MHz/512 MB L2 Cache, Factory Integrated	430934-L21
	Dual-Core Intel® Pentium® D processor 925 3.0 GHz/800MHz/2x2 MB L2 Cache, Factory Integrated	433357-L21
	Dual-Core Intel® Pentium® D Processor 935 3.2 GHz/800 MHz, 2x2 MB L2 Cache, Factory Integrated	440284-L21
	Dual-Core Intel® Pentium® D Processor 945 3.4 GHz/800 MHz/2x2 MB L2 Cache, Factory Integrated	440285-L21
	Dual-Core Intel® Xeon® processor 3040 1.86 GHz/1066MHz/1x2M L2 Cache, Factory Integrated	432125-L21
	Dual-Core Intel® Xeon® processor 3050 2.13 GHz/1066MHz/1x2M L2 Cache, Factory Integrated	430936-L21

Memory	2 GB Unbuffered PC2-5300 ECC DIMM (1 x 2 GB)	432806-B21
	1 GB Unbuffered PC2-5300 ECC DIMM (1 x 1 GB)	432804-B21
	512 MB Unbuffered PC2-5300 ECC DIMM (1 x 512 MB)	432803-B21

Hard Drives	Serial ATA (SATA) – Non-hot Plug HDD (SATA or SAS Models)
	HP 80GB 1.5G SATA 7.2K NHP 3.5" HDD	383410-B21
	HP 160GB 1.5G SATA 7.2K NHP 3.5" HDD	411275-B21
	HP 250GB 1.5G SATA 7.2K NHP 3.5" HDD	411276-B21
	HP 500GB 1.5G SATA 7.2K NHP 3.5" HDD, FIO*	404469-B21
	* Factory Integrated Only
	Serial Attached SCSI (SAS) Non-Hot Plug (SAS Models Only)
	HP 300GB SAS 3.5" 15K NHP	431950-B21
	HP 146GB SAS 3.5" 15K NHP	432093-B21
	HP 72GB SAS 3.5" 15K NHP	432095-B21

Optical Drives	CD-RW/DVD-ROM Combo Drive Option Kit	331346-B21
	HP DVD+R/RW 8X HH	383974-B21
	HP ProLiant 48X CD	398972-B21
	DVD ROM Drive 16x	217053-B21
	NOTE: For the installation of Windows and other OS's, a floppy drive (DC361B) may be required to complete driver installation. A USB drive key may not work to complete driver installation.

Step 3: Choose Additional Options for Factory Integration NOTE: For additional options, please refer to the "Options" section below. NOTE: Some options may not be factory integratable. Please contact your local sales representative for additional information.
Operating Systems	Pre-install Microsoft Windows 2003 SBS Standard Edition
	MS W2003 SBS R2 Std 1XX FIO Eng SW	432564-001
	MS W2003 SBS R2 Prm 1XX FIO Eng SW	432566-001

Options

Memory	2 GB Unbuffered PC2-5300 ECC DIMM (1 x 2 GB)	432806-B21
	1 GB Unbuffered PC2-5300 ECC DIMM (1 x 1 GB)	432804-B21
	512 MB Unbuffered PC2-5300 ECC DIMM (1 x 512 MB)	432803-B21

Smart Buy Memory	1024 MB Unbuffered Advanced ECC PC2-5300 DDR2 (1x1024 MB), Dual Rank	432804-S21
	512 MB Unbuffered Advanced ECC PC2-5300 DDR2 (1x512 MB), Single Rank	432803-S21

Optical Drives	CD-RW/DVD-ROM Combo Drive Option Kit	331346-B21
	48X CD-ROM Option, Carbon	398972-B21
	DVD-RW Drive Option Kit	383974-B21
	1.44 MB USB Diskette Drive	DC361B
	NOTE: For the installation of Windows and other OS's, a floppy drive may be required to complete driver installation. A USB drive key may not work to complete driver installation.

Hard Drives	Serial – ATA (SATA) – Non-Hot Plug (SATA Models Only)
	HP 80GB 1.5G SATA 7.2K NHP 3.5" HDD	383410-B21
	HP 160GB 1.5G SATA 7.2K NHP 3.5" HDD	411275-B21
	HP 250GB 1.5G SATA 7.2K NHP 3.5" HDD	411276-B21
	NOTE: When purchasing systems with the 500GB Non-Hot Plug SATA drives, please reference the Configuration Information Section of this QuickSpecs to order via Configuration to Order. NOTE: The purchase of additional SATA hard drives requires the purchase of additional HP 1-Port SATA RAID Cables, (P/N 413748-B21)
	Serial Attached SCSI (SAS) Non-Hot Plug (SAS Models Only)
	HP 300GB SAS 3.5" 15K NHP	431950-B21
	HP 146GB SAS 3.5" 15K NHP	432093-B21
	HP 72GB SAS 3.5" 15K NHP	432095-B21
	NOTE: The purchase of SAS hard drives requires the purchase of HP Internal SAS/SATA 4-Port Cable (P/N 430479-B21). This cable is standard in the SAS BTO model. NOTE: The purchase of SAS HBA or array controller is required.

Storage Controllers	HP SC44Ge Host Bus Adapter	416096-B21
	HP SC11Xe Host Bus Adapter	412911-B21
	HP 8 Internal Port SAS HBA with RAID NOTE: PCI-X Interface (PCI 32bit/33MHz compatible)	347786-B21
	64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2 NOTE: PCI-X Interface (PCI 32bit/33MHz compatible)	374654-B21
	HP Smart Array E200/128 BBWC Controller	411508-B21
	128MB Battery-Backed Write Cache Enabler	351580-B21
	NOTE: Supports the Smart Array E200 Controller, Smart Array 641 Controller and Smart Array 642 Controller.
	HP 1-Port SATA RAID Cable NOTE: The purchase of SATA hard drives requires the purchase of the HP 1-Port SATA RAID Cable (P/N 430479-B21) for each additional hard drive.	413748-B21
	HP Internal SAS/SATA 4-Port Cable NOTE: The purchase of a SAS Storage Controller requires the purchase of HP SAS/SATA 4-Port Cable (P/N 430479-B21)	430479-B21
	NOTE: SAS Storage Controllers will run both SATA and SAS drives.

Communications	HP NC110T PCI Express Gigabit Server Adapter NOTE: Does not support Windows 2000.	434905-B21
	HP NC360T PCI Express Dual Port Gigabit Server Adapter	412648-B21
	Agere 2006 PCI Hi-Speed 56K Modem	440519-B21

Tape Drives	NOTE: Installation of SCSI internal tape drives in a ML110 G4 model requires SCSI controller kit (PN: 412911-B21).
	NOTE: For complete listing of tape drive offerings see: http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html
	USB Tape Drives
	HP StorageWorks DAT 40 USB Internal Tape Drive (Carbonite)	DW022A
	HP StorageWorks DAT 72 USB Internal Tape Drive (Carbonite)	DW026A
	HP StorageWorks DAT 160 USB Internal Tape Drive	Q1580A
	SAS Tape Drives
	HP StorageWorks DAT 160 SAS Internal Tape Drive	Q1587A
	DAT SCSI Tape Drives
	HP StorageWorks DAT 40 SCSI Internal Tape Drive (Carbon)	C5686C
	HP StorageWorks DAT 72 SCSI Internal Tape Drive (Carbon)	Q1522B
	HP StorageWorks DAT 160 SCSI Internal Tape Drive	Q1573A

HP D2D Backup System	HP StorageWorks D2D110 Backup System NOTE: 1TB of Disk Storage	EH880A
	HP StorageWorks D2D110 Backup System with Data Protector Express Software Kit NOTE: 1TB of Disk Storage	EH923A
	HP StorageWorks D2D120 Backup System NOTE: 2TB of Disk Storage	EH884A
	HP StorageWorks D2D120 Backup System with Data Protector Express Software Kit NOTE: 2TB of Disk Storage	EH924A
	HP StorageWorks D2D130 Backup System NOTE: 3TB of Disk Storage.	EH950A
	HP StorageWorks D2D130 Backup System with Data Protector Express Software Kit NOTE: 3TB of Disk Storage.	EH951A
	HP StorageWorks D2D130 Backup System with LTO-3 Ultrium 920 SAS Tape Drive NOTE: 3TB of Disk Storage.	EH952A
	NOTE: Please see the HP D2D Backup Systems QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/12651_na/12651_na.HTML

Installation of Server into Racks	ProLiant Rack Enabling Kit	417705-B21

Lights Out Management Card	Lights-Out Management Card Kit for ML110 G4	418280-B21

UPS	HP T1000 UPS	AF404A
	HP T1000 UPS	AF403A
	HP T750 UPS, Low Voltage	378439-D71

USB Options	HP 1GB USB 2.0 Floppy Drive Key	442085-B21
	HP 256MB USB 2.0 Floppy Drive Key	442084-B21
	HP USB 2-Button Optical Scroll Mouse (Carbonite/Silver)	DC172B
	HP USB 04 Standard Keyboard	DT528A#ABA
	USB 2.0 4-port HUB	DG954A

HP KVM Switch Options	HP 1x4 Console Switch	AF611A
	HP PS2 Server Console Cable, 6 foot, 2-Pack	AF612A
	HP USB Server Console Cable, 6 foot, 2-Pack NOTE: required for supporting USB peripherals.	AF613A
	NOTE: For additional information regarding KVM Switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.

Service and Support, HP Care Pack, and Warranty Information

Service and Support Offerings (HP Care Pack Services)	Hardware Services 4-Hour On-site Service
	13-Hour x 5-Day Coverage, 3 Years	U4434E
	24-Hour x 7-Day Coverage, 3 Years	U4435E
	Hardware Services Next Business Day On-Site Service
	9-Hour x 5-Day Coverage, 3 Years	U4433E
	Hardware Services 6 Hour Call-to-Repair
	24-Hour x 7-Day Coverage, 3 Years, 6 Hour Call-to-Repair	U4436E
	Hardware Installation Service
	HP Install ProLiant ML110 Service	U4444E
	NOTE: For more information, customer/resellers can contact: http://www.hp.com/services/carepack.

Memory

HP ProLiant ML110 G4 Models

Standard Memory

512 MB of PC2-5300 DDR2 SDRAM running at 512 MB with ECC capabilities Memory installed (1 x 512 MB SDRAM DIMM).

Standard Memory Plus Optional Memory

Up to 5120 MB memory is available with the optional installation of PC2-5300 un-buffered ECC DDR2 SDRAM DIMM Memory kits.

Standard Memory Replaced with Optional Memory

Up to 8192 MB of memory is available with the removal of the standard 512 MB of memory and the optional installation of PC2-5300 un-buffered ECC DDR2 SDRAM DIMM Memory kits.

NOTE: The below chart does not represent all possible memory configurations.
NOTE: In memory configurations requiring 2 DIMM and 4 DIMM configurations, the memory must be paired for optimal performance. This means that DIMMs in slot 1 and 3 have to be identical, in slot 2 and 4 have to be identical. (For example, the Optional memory configuration shown below)

Memory		Slot
		4	3	2	1
Standard	512 MB	Empty	Empty	Empty	512 MB
Optional	5120 MB	2048 MB	512 MB	2048 MB	512 MB
Maximum	8192 MB	2048 MB	2048 MB	2048 MB	2048 MB

Following are memory options available from HP:
2 GB Unbuffered PC2-5300 ECC DIMM (1 x 2 GB)	432806-B21
1 GB Unbuffered PC2-5300 ECC DIMM (1 x 1 GB)	432804-B21
512 MB Unbuffered PC2-5300 ECC DIMM (1 x 512 MB)	432803-B21

Storage

	1	48x IDE (ATAPI) CD-ROM
	2	Removable Media Bays (1.6" each)
	3, 4, 5, 6	Four (4) Non-Hot Plug Drive Bays


Drive Support

	Quantity Supported	Position Supported	Controller
Removable Media
DVD + CDRW Drive	2	1 or 2	Integrated IDE (ATAPI)
DVD-RW Drive	2	1 or 2	Integrated IDE (ATAPI)

Hard Drives (SATA Models only)
SATA 1.5Gb – Non-Hot Plug
	Quantity Supported	Position Supported	Controller
3.5-inch 80GB 7.2K, SATA 160GB 7.2K, SATA 250GB 7.2K SATA 500GB 7.2K SATA	Up to 4	3,4,5,6	4 Port SATA controller with Embedded RAID on Motherboard

Hard Drives (SAS Models only)
SAS – Non-Hot Plug
	Quantity Supported	Position Supported	Controller
3.5-inch 72GB 15K SAS 145GB 15K SAS 300GB 15K SAS	Up to 4	3,4,5,6	HP 8 Internal Port SAS HBA with RAID (0,1)

Maximum Storage Capacity – SATA/SAS Models
Internal	SATA	1TB (4x250GB (BTO) 2TB (4 x 500GB (CTO)
	SAS	1.2TB (4x300GB)
Total	SATA	1TB (4x250GB (BTO) 2TB (4 x 500GB (CTO)
	SAS	1.2TB (4x300GB)

Tape Drives and D2D Backup System
NOTE: A SCSI controller needs to be purchased to operate internal SCSI devices in the SATA Models. NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the following: http://h18000.www1.hp.com/products/quickspecs/North_America/10233.html
	Position Supported	Controller	Controller/HBA Option Kit Part Number
Internal USB Tape Drives DAT 24 USB DAT 40 USB DAT 72 USB	2	USB 2.0 port	N/A
External USB Tape Drives DAT 40 USB DAT 72 USB DAT160 USB	External	USB 2.0 port	N/A
Internal SAS Tape Drives DAT 160 SAS	2	HP SC44Ge Host Bus Adapter	416096-B21
External SAS Tape Drives DAT 160 SAS	External	HP SC44Ge Host Bus Adapter	416096-B21
Internal SCSI Tape Drives DAT 40 DAT 72 DAT160	2	HP SC11Xe Host Bus Adapter	412911-B21
External SCSI Tape Drives DAT 40 DAT 72 DAT160	External	HP SC11Xe Host Bus Adapter	412911-B21
HP StorageWorks D2D Backup Systems D2D110 D2D120	External	Embedded Network Controller	N/A

Power Specifications

Part Number	416121-001
Spare Kit	419029-001
Operational Input Voltage Range (Vrms)	100 to 127 and 200 to 240 V auto ranging
Frequency Range (Nominal) (Hz)	50 to 60 Hz

Nominal Input Voltage (Vrms)	100	115	208	220	230	240
Max Rated Output Wattage Rating	N/A	370	N/A	N/A	370	N/A
Nominal Input Current (A rms)	N/A	8	N/A	N/A	4	N/A
Max Rated Input Wattage Rating (Watts)	N/A	N/A	N/A	N/A	N/A	N/A
Max. Rated VA (Volt-Amp)	N/A	N/A	N/A	N/A	N/A	N/A
Efficiency (%)	N/A	>65%	N/A	N/A	>65%	N/A
Power Factor	N/A	N/A	N/A	N/A	N/A	N/A
Leakage Current (mA)	0.25mA (at 60HZ)	N/A	N/A	N/A	N/A	N/A
Maximum Inrush Current (A peak)	N/A	No component was damaged and input fuse shall not blow	N/A	N/A	No component was damaged and input fuse shall not blow	N/A
Maximum Inrush Current duration (mS)	N/A	N/A	N/A	N/A	N/A	N/A

System Specifications

	Power **
HP ProLiant ML110 G4 Fully Configured	(see **)
Fully Loaded System output Wattage (W)	370W
Fully Loaded System Input Current (A rms)	8A @ 115V, 4A @ 230V
Fully Loaded System Thermal (BTU- Hr)	1907BTU
Fully Loaded System VA (Volt-Amp)	920
System Leakage with all power supplies loaded (mA)	0.75mA@240V 0.45mA@120V
System Inrush Current with all power supplies loaded (A)	80A
Power cord requirements	Nema 5-15P to IEC320-C13
	IEC320-C13 to IEC320-C14
**Power shown is for a fully configured system consisting of (1) CPU, (4) double-sided DIMMs, (4) HDDs, (1) CD-ROM, (1) DVD-ROM, (4) PCI cards, and (1) power supply.

Power Cords (13 Cord Sets)	Power Cord Part Number
	121565-001

Technical Specifications

System Unit	Dimensions (HxWxD) (with feet)	14.46 x 6.88 x 16.76 in (36.7 x 17.5 x 42.6 cm)
	Weight (approximate)	23.15 lb (10.5 kg)
	Input Requirements (per power supply)	Range Input Voltage	100 to 127 VAC/200 to 240 VAC
	Input Requirements (per power supply)	Normal Line Voltage	115 or 230 VAC
	Line Frequency	50 to 60 Hz
	Rated Input Current	load 8A at 115VAC, 4A at 230VAC
	BTU Rating	1907 BTU
	SCSI Connectors (SCSI Models only)	One internal LVD/SE connector for U160 devices, plus two internal SE connectors for legacy devices.
	Power Supply Output Power (per power supply)	Rated Steady-State Power	370W
	Power Supply Output Power (per power supply)	Maximum Peak Power	370W
	Temperature Range	Operating	50° to 95° F (10° to 35° C)
	Temperature Range	Shipping	-40° to 140° F (-40° to 60° C)
	Relative Humidity (non-condensing)	Operating	10% to 90%
	Relative Humidity (non-condensing)	Non-operating	10% to 90%
	Acoustic Noise	Idle (Fixed Disk Drives Spinning)
		L WAd (BELS)	5.5
		Operating (Random Seeks to Fixed Disks)
		L WAd (BELS)	6.0

HP 160GB 1.5G SATA 7.2K NHP 3.5" HDD 411275-B21	160GB 7,200 rpm	Capacity	160,041 MB
		Height	1.0 in. (26.1 mm)
		Width	4.0 in. (101.6 mm)
		Interface	Serial ATA
		Transfer rate synchronous (maximum)	1.5 Gb/s
		Seek time (typical reads, including settling)	Single track	0.9 ms
			Average	9.0 ms
			Full-stroke	17.8 ms
			Rotational speed	7,200 rpm
		Physical Configuration	Bytes/Sector	512
			Logical Blocks	312,581,808
		Operating Temperature	41° to 131° F (5° to 55° C)

NHP 72GB 3G SAS 15K 3.5" HDD 431950-B21	72GB 15K	Capacity	73,407,856,856
		Height	1.0 in (25.4mm)
		Width	4.0 in. (101.6 mm)
		Interface	SAS
		Transfer rate synchronous (maximum)	3 Gb/sec
		Seek time (typical reads, including settling)	Single track	0.27 ms
			Average	3.5 ms
			Full-stroke	3.5 ms
			Rotational speed	15,000 rpm
		Physical Configuration	Bytes/Sector	512
			Logical Blocks	143,374,737
		Operating Temperature	50° to 95° F (10° to 35° C)

48X Max IDE (ATAPI) CD-ROM Drive 398972-B21	Disk	Applicable Disk	CD-ROM, CD-XA, CD-DA (Mode 1, Mode 2, Form 1 and 2)
			Photo CD (Single and Multi-session)
			Mixed Mode (Audio and Data combined)
			CD-R
		Capacity	540MB (Mode 1, 12 cm)
		Capacity	650MB (Mode 2, 12 cm)
	Block Size	Mode 1	2,048 bytes, 1024 bytes
		Mode 2	2,340 bytes, 2,336 bytes, 1024 bytes
		CD-DA	2,352 bytes
		CD-XA	2,328 bytes
	Interface	IDE (ATAPI)
	Access Times (typical)	Random	<100 ms
	Access Times (typical)	Full-Stroke	<150 ms
	Data Transfer Rate	Sustained	3000 to 7200 KB/s (20X to 48X)
		Burst	150 KBps to 7,200 KBps
		Bus Rate	16.7 MBps
	Cache Buffer	128 KB
	Start-up Time (typical)	< 7 seconds
	Stop Time	< 4 seconds
	Laser Parameters	Type	Semiconductor Laser GaA1As
	Laser Parameters	Wave Length	780 ± 25 nm
	Operating Conditions	Temperature	41° to 122° F (5° to 50° C)
	Operating Conditions	Humidity	10% to 90%
	Dimensions	(HxWxD, maximum)	1.63 x 5.75 x 7.87 in (41.3 x 146 x 200 cm)
	Dimensions	Weight	2.64 lb (1.2 kg)

4 port Embedded SATA controller	SATA Protocol	SATA 1.5Gb/s
	SATA Ports	4 internal
	Port transfer rate	1.5 Gb/s total
	Maximum Capacity	up to 2 TB (4 x 500GB non hot plug SATA HDD)
	RAID Levels Supported	RAID 1+0 (Striping & Mirroring) RAID 1 (Mirroring) RAID 0 (Striping)
	Logical RAID Volumes Supported

Embedded NC320i PCIe Gigabit Server Adapter	Network Interface	10Base-T/100Base-TX/1000Base-TX
	Compatibility	IEEE 802.3 10Base-T
		IEEE 802.3ab 1000Base-T
		IEEE 802.3u 100Base-TX
	Data Transfer Method	Single lane (x1), 100MHz PCI Express Reference Clock
	Network Transfer Rate	10Base-T (Half-Duplex)	10 Mb/s
		10Base-T (Full-Duplex)	20 Mb/s
		100Base-TX (Half-Duplex)	100 Mb/s
		100Base-TX (Full-Duplex)	200 Mb/s
		1000Base-TX (Half and Full-Duplex)	2000Mb/s
	Connector	RJ-45 connector
	Cable Support	10Base-T	Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
		10/100/1000Base-TX	Category 5 UTP; up to 328 ft (100 m)

Environment-friendly Products and Approach

End-of-life Management and Recycling

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.

© Copyright 2008 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

For hard drives, 1 GB = 1 billion bytes. Actual formatted capacity is less.

DA-12577 18 - Version 18 - February 29, 2008