  |
Overview
|
|
Overview
|
HP 1/10Gb Virtual Connect Ethernet Module for c-Class BladeSystem
|
||||||||||||||||||||||||||||||||
| What's New | |
|
|
|
|
|
| Models | |
| HP 1/10Gb Virtual Connect Ethernet Module for c-Class BladeSystem |
399593-B22
|
|
|
|
| At A Glance | |
|
Performance
Management
Virtual Connect Server Profiles
Options
|
|
|
|
Supported Products
| Compatibility | |
| HP ProLiant Servers | All HP ProLiant BladeSystem c-Class Server Blades with latest ROM updates |
|
Supports all Server NIC's including LOM and Mezzanine card options Virtual Connect requires the following minimum firmware levels:
Server Mezzanine Cards:
For the latest additional information on required firmware versions and to download firmware upgrades, see the HP website http://www.hp.com/go/bladesystemupdates. |
|
| ProLiant BL c-Class Server Blade Enclosures |
The HP BladeSystem c3000 and c7000 Enclosures have been designed up front with the Virtual Connect Architecture in mind incorporating the HP Onboard Administrator, ILO Management, and HP Management tools inside the Virtual Connect framework. Virtual Connect requires the following minimum firmware levels:
|
|
|
|
| Supported Configurations | |||
 |
|||
|
HP BladeSystem c7000 Enclosure - Rear View
|
|||
| 1. | Upper Fan System | 5. | Interconnect Bays 7 / 8 |
| 2. | Interconnect Bays 1 /2 | 6. | On Board Administrator |
| 3. | Interconnect Bays 3 / 4 | 7. | Lower Fan System |
| 4. | Interconnect Bays 5 / 6 | 8. | Rear Redundant Power Complex |
|
|
|||
 |
|||
|
HP BladeSystem c3000 Enclosure - Front View
|
|||
| 1. | Device Bays 1 thru 8 | 4. | Insight Display |
| 2. | Enclosure DVD Drive | 5. | Active Onboard Administrator |
| 3. | Standby Onboard Administrator (reserved for Future) | ||
|
|
|||
 |
|||
|
HP BladeSystem c3000 Enclosure - Rear View
|
|||
| 1. | Local KVM interface (reserved for future) | 7. | iLO/Onboard Administrator Port |
| 2. | Interconnect Bay 1 |
8. | iLO/Onboard Administrator Port 2 (reserved for future) |
| 3. | Active Cool Fans |
9. | Power Supplies |
| 4. | Interconnect Bay 2 |
10. | Interconnect Bay 4 |
| 5. | Enclosure Up-link and Service
Port |
11. | Interconnect Bay 3 |
| 6. | Enclosure Down-link | ||
|
|
|||
|
Mezzanines
|
|
| Port Mapping | Port mapping differs slightly
between full height and half height server blades due to the support for
additional Mezzanine cards on the full height version. HP has simplified the processes of mapping Mezzanine ports to switch ports by providing intelligent management tools via the Onboard Administrator and HP Insight Manager Software. The Onboard Administrator Guide, Enclosure Setup and Installation Guide provides detailed information on port mapping. |
 |
 |
|
c7000 Half Height Server Blade
|
c7000 Full Height Sever Blade
|
|
|
|
 |
 |
|
c3000 Half Height Server Blade
|
c3000 Full Height Sever Blade
|
|
|
|
| The following are supported configurations for the 1/10Gb Virtual Connect Ethernet Module. Please note that other interconnect options can be installed in the enclosure, but they do not inherit the benefits of Virtual Connect. Switches and Pass-Thru modules will operate per their default configurations. Any moves, adds, or changes to servers which are connected to non-Virtual Connect modules will require reconfiguration on the LAN and/or SAN. The Virtual Connect Manager will only manage Virtual Connect Modules. | |
|
|
|
|
HP BladeSystem c7000 Enclosure
|
||||||||
| NOTE: The following tables show a number of typical, supported configurations for an HP BladeSystem c7000 Enclosure. | ||||||||
|
||||||||
|
||||||||
|
||||||||
|
||||||||
|
||||||||
|
||||||||
|
||||||||
|
||||||||
|
||||||||
| * This configuration is only applicable for enclosures with full-height servers. | ||||||||
|
||||||||
|
||||||||
|
||||||||
|
||||||||
|
||||||||
|
|
||||||||
|
HP BladeSystem c3000 Enclosure
|
||||
| NOTE: The following tables show a number of typical, supported configurations for an HP BladeSystem c3000 Enclosure. | ||||
|
||||
|
||||
|
||||
|
|
||||
| Required Network Cabling |
10BASE-T |
Categories 3 UTP or better (up
to 100 meters) EIA/TIA-568 100-ohm STP (up to 100 meters) |
| 100BASE-TX | Category 5 UTP or better (up
to 100 meters) EIA/TIA-568 100-ohm STP (up to100 meters) |
|
| 1000BASE-T |
Category 5e UTP or better (up
to 100 meters) EIA/TIA-568 100-ohm STP (up to 100 meters) |
|
| 10GBASE-CX4 | Twinax CX4 (0.5 to 15m) | |
| NOTE: For available cables; please see the "Options" section below of this QuickSpecs. | ||
|
|
||
| Stacking Configuration | Stacking links are used to interconnect Virtual Connect Ethernet Modules when using more than one enclosure (future) or when using more than two Virtual Connect Ethernet Modules in a single enclosure. All Virtual Connect Modules within the VC Domain must be interconnected. Any combination of 1Gb and 10Gb cables can be used to interconnect the Virtual Connect Modules; however the following provides recommended configurations (note that a built-in 10Gb link is provided between modules in horizontally adjacent bays). Supported cable lengths on 10Gb uplinks are 3 to 15 meters and supported 10Gb stacking links (connecting between two HP Virtual Connect Ethernet Modules) are 0.5 to 7 meters. Interconnecting the modules allows all Ethernet NICs on all server blades in the Virtual Connect domain to have access to any Virtual Connect uplink port. By using these module-to-module links, a single pair of uplinks can be used as the data center network connections for the entire Virtual Connect domain, and allows any server blade to be connected to any Ethernet network. |
|
|
|
 |
|
|
Service and Support, HP Care Pack and Warranty Information
| Service and Support |
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Additional support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. NOTE: Server Blade Interconnect Limited Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html HP services provide total care and support expertise with committed response designed to meet your IT and business needs. To fully capitalize on your HP BladeSystem servers' capabilities requires
a service partner who thoroughly understands your server technology and
systems environment. HP Services, an industry leader in provision of multi
vender support solutions provides a range of support services designed
to meet the varying needs of business. Whether an SMB or large global
corporation HP has a HP BadeSystem server support offer to help you speedily
deploy and maximize system uptime. Recommended Service - simplify ProLiant solution implementation,
maintenance, and management.
Enhanced Service - optimize service level to increase IT performance
and availability.
Installation & Start-Up service for HP BladeSystem Infrastructure
plus HP BladeSystem Enhanced Network Installation and Start-UP as per
the Customer Description and/or Data Sheet. To be delivered on a scheduled
basis 8am-5pm, M-F, excluding HP holidays For a complete listing of service offerings and information visit: |
|
|
Related Options
| Cabling Options | HP .5m 10GbE CX4 Cable | 444477-B21 |
| HP 1m 10GbE CX4 Cable | 444477-B22 | |
| HP 3m 10GbE CX4 Cable | 444477-B23 | |
| HP 15m 10GbE CX4 Cable | 444477-B27 |
| Service and Support Offerings | NOTE: The HP Care Pack service part numbers below for ProLiant BL c-Class server blades, cover the server blade and all HP branded hardware options qualified for the server, purchased at the same time or afterwards, internal to the server. | |
| Hardware Services On-site Service | UE458E | |
| 4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic | UE459E | |
| 4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic | UE460E | |
| 6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic | ||
| Support Plus 24 | ||
| Onsite HW support 24x7, 4hr response and Microsoft O/S SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic | UE473E | |
| NOTE: HP Care Pack services for the c7000 and c3000 Enclosure cover the enclosure, power supplies and fans. HP qualified rack options are covered by these services when installed within the same rack. HP supported c-Class enclosure devices including pass thru, Ethernet interconnect and virtual connect modules are also covered by the c7000 and c3000 enclosure Care Pack services. | ||
| NOTE: SSAN/Fabric switches for the HP c-Class BladeSystem are not covered under the c7000 and c3000 enclosure Care Packs, SAN/Fabric switches carry separate Care Packs. SAN/Fabric Switch Care Pack service level support should always be uplifted to match existing storage or server service level. | ||
| Hardware Services On-site Service | ||
| Next Business Day On-site Service,
5-Day x 9-Hour Coverage, 3 Years, Electronic NOTE: Uplifts the Ethernet devices to the same level of service as the c-class enclosure |
UE477E |
|
| 4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic |
UE478E |
|
| 4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic |
UE479E |
|
| 6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic |
UE480E |
|
| Installation & Start-up Services | ||
| HP BladeSystem c-Class Infrastructure Installation and Startup Service, Electronic |
UE602E |
|
| HP BladeSystem Enhanced Network
Installation and Startup Service, Electronic |
UE603E | |
| ProLiant BL c-Class Blade Server Hardware Installation, Electronic | UE493E | |
| ProLiant BL c-Class Enclosure and Server Blade Hardware Installation, Electronic | UE494E | |
| NOTE: For additional information; please visit: http://www.hp.com/services/bladesystemservices |
|
|
Technical Specifications
| Shipping Dimensions | Length |
352.55mm (13.88 in) |
|
| Width |
270.00mm (10.63 in) | ||
| Height | 120.65mm (4.75 in) |
||
|
Shipping Weight |
2.0Kg (4.4lbs) | ||
| Product Specifications Hardware | Performance | 108 Gb total throughput | |
| Non-blocking, line rate packet forwarding | |||
| Maximum transmission unit (MTU) of up to 9216 bytes (jumbo frames) | |||
|
Connectors and Cabling |
Gigabit Ethernet uplink ports
(Up to 10 external) 8 external 10/100/1000BASE-T RJ-45 ports. 2 external 10GBASE-CX4 (one additional internal 10Gb Cross Connect) |
||
| Indicators | Module locator (UID) Module status X1/X2 port status/locator X1/X2 link/port activity Port 1-8 port status/locator Port 1-8 link/activity |
||
| Dimensions | Length | 10.5in (267.7mm) | |
| Width | 7.5 in (92.79mm) | ||
| Height | 1.1 in (27.94mm) | ||
| Weight |
1.27Kg (2.8 Lbs) | ||
| Environmental Ranges | Temperature Range |
||
| Specification |
10C to 35C (50F to 95F) | ||
| Temperature range* |
|||
| Operating |
10C to 35C (50F to 95F) | ||
| Shipping |
Shipping -40C to 60C (-40F to 140F) | ||
| Storage |
-20°C to 60°C (-4F to 140°F) | ||
| Maximum wet bulb temperature |
30C (80F) | ||
| Relative humidity (noncondensing)** |
|||
| Operating |
10% to 90% | ||
| Shipping | 10% to 90% | ||
| Storage | 10% to 95% | ||
| * All temperature ratings
shown are for sea level. An altitude derating of 1°C per 304.8 m (1.8°F
per 1,000 ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed.
Upper operating limit is 3,048m (10,000 ft) or 70 Kpa/10.1 psia. Upper non-operating
limit is 9,144 m (30,000 ft) or 30.3 KPa/4.4 psia. ** Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude maximum for storage corresponds to a pressure minimum of 70 KPa. |
|||
| Power Specification | 12V @ 3A (36 W) | ||
|
|
|||
| Product Specifications Software | Security Features |
HTTPS (HTTP exchanged over an
SSL-encrypted session) is required for access to the Virtual Connect Manager. Access to the Virtual Connect Manager is via the system Onboard Administrator Each user account can be configured for a combination of four access privileges to control and/or view elements in the Virtual Connect Manager. User verification by account name and password (Case Sensitive) LDAP Authentication services provide role based security via an LDAP SSH Directory Server connection. |
| Trunking and Failover Features |
Shared Uplink Sets using Link
Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling
with upstream switches that conform to IEEE 802.3ad. Ports can alternatively
be configured for failover only. External ports within a Port Set can be on the same VC Ethernet module or on multiple VC modules within the VC domain. In the event of an uplink failure to a data center switch, the next highest performance uplink connection or aggregation will become active. Fast MAC Cache failover enables rapid recovery of network connections when a standby module becomes active. Smart Link network senses a failed upstream switch connection and allows teamed NIC's to properly failover. Configure uplink speeds to Auto,,10Mb, 100Mb, 1Gb,or10Gb on the associated uplinks |
|
| VLAN Features | 802.1Q VLAN supported on uplinks Uplink ports can be configured for VLAN tagging at egress or pass-thru of tagged VLAN packets from Server ports Native VLAN support for untagged packets on a shared uplink set. Packets can be targeted to a specific server ports. |
|
| Management Features | Simple and intuitive Graphical
User Interface (GUI) for defining, configuring, and managing all elements
of the Virtual Connect Domain.
Setup Wizards for initial domain installation and configuration and network configuration. Comprehensive administration, definition, and management of Ethernet Network, Shared Uplink Set, and Server Profiles Embedded SNMP v1, v2 and SMI-S agents allow Network Management applications to query Virtual Connect for statistics and trap information. A robust, scriptable and secure Command Line Interface simplifies management and enables macros to control common Virtual Connect tasks Any uplink port can be used as a dedicated mirrored port for traffic
analysis and troubleshooting by a Network Analyzer or Sniffer. Domain Management of user accounts, enclosure, Virtual Connect domain settings, and firmware updates The location and status of Virtual Connect Modules in the HP c-Class Enclosure and Onboard Administrator can be viewed from the Hardware Status page. Including at-a-glance detailed information of the hardware elements via mouse-over pop-up windows. MAC Address Administration allows local administration of predefined or user-defined MAC address ranges. VC manager runs as a high-availability pair when an HP 1/10Gb VC-Enet Module is installed in adjacent bays. All configuration data is stored in flash memory and checkpointed to the standby module. Configurations can also be backed up to a workstation via the GUI. |
|
|
|
||
| Management and Standards Support | Standards |
IEEE 802.1Q IEEE 802.3ac IEEE 802.3ad (LACP) IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X IEEE 802.3ak 10GBASE-CX4 IGMP v1,v2,v3 SNMP v.1, v.2 |
|
|
||
| Safety and Compliance |
Safety Certifications | UL/CUL Recognition to UL/CSA 60950-1 |
| TUV to EN 60950-1 | ||
| CB report and certificate to IEC 60950-1 with all country deviations | ||
| CE Marking | ||
|
|
||
| Electromagnetic Emissions Certifications FCC Part 15 Class A | FCC Part 15 Class A |
| EN 55022 Class A (CISPR22 Class A) | |
| VCCI Class A | |
| AS/NZS 3548 Class A or AS/NZS CISPR22 Class A | |
| MIC Class A | |
| CE Marking | |
|
|
|
| Environment-friendly Products and Approach | End-of-life Management and Recycling |
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner. The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment. |
|
|
|
|||
|
© Copyright 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. |
