HP StorageWorks 1/8 G2 Tape Autoloader

The HP StorageWorks 1/8 G2 Tape Autoloader offers exceptional dense storage value for basic data protection Ideal as an entry-level automated backup solution for small to medium sized businesses it combines storage density and tape library features into a compact 1U form factor. With compressed capacity (2:1) of up to 12.8 TB using LTO-4 Ultrium tape drive technology, the 1/8 G2 Tape Autoloader will provide cost-effective, easy-to-install unattended backup. The 1/8 G2 Tape Autoloader is equipped with one LTO Ultrium SCSI or SAS tape drive and can hold up to eight data cartridges. In order to easily manage your media, standard features include a bar code reader and two removable 4-slot magazines. Perfect for replicated systems, the web-based remote management interface reduces dependencies on local IT staff, allowing multiple sites to be supported centrally. All 1/8 G2 Tape Autoloaders include HP Data Protector Express Single Server Edition software for Windows, Linux and NetWare.

• Integration of the HP StorageWorks LTO-4 Ultrium 1760 SCSI Tape Drive.
• IPv6 network protocol support. Autoloaders can now be connected over both IPv6 and IPv4 networks.
• Autoloaders have obtained the IPv6 Ready, Phase-2 logo.
• LTO-4 Ultrium autoloader-enabled encryption to protect your data from unauthorized access.
• HTTPS support for authenticated and encrypted transfers over the Internet.

• Exceptional storage density value
• Easy to install, manage and use integrated solution
• Installation options
• Flexible tape technology and interface choices to suit your needs
• Alternatives in movement and storage of data
• Agility - easy to manage
• Easy-to-enable AES 256-bit embedded hardware encryption with compression
• Customer serviceable and replaceable components
• Investment protection
• Complete solution in the box

• The HP StorageWorks 1/8 G2 Tape Autoloader packs the maximum amount of storage into the minimum amount of space. LTO-4 Ultrium 1760 tape technology delivers 12.8 TB of compressed capacity (2:1) in a 1U form factor.
• Standard bar code reader provides faster inventory times and facilitates tracking of media. Reduce installation time with rack-ready units; optional rack kits are available for rack-mounting. The unit can also be used on a desktop by simply installing the enclosed rubber feet.
• Choose from a range of one drive, eight slot LTO-based configurations to best suit your needs. The 1/8 G2 models include LTO-4 Ultrium 1760 SAS or SCSI, LTO-3 Ultrium 920 SAS or SCSI, and LTO-2 Ultrium 448 SCSI.
• For dedicated import/export of media cartridges, each autoloader includes one mail slot. The autoloader also includes two removable 4-slot magazines for bulk loading of media, and provides a convenient bulk storage unit for moving media offsite.
• Integrated web-based remote management capability allows a remote administrator to control, configure, monitor and troubleshoot the device, thus relieving the customer of costly onsite IT resources.
• Provides highest level of encryption security, with compression, for strong backup data privacy to secure confidential information and address compliance quickly. Encryption key management support via HP Data Protector software and other ISV backup applications.
• Easy to manage modular design of tape autoloader allows for quick service or repair of unit to reduce downtime and maximize efficiency.
• Interchange 1/8 G2 Tape Autoloader drives into HP StorageWorks MSL2024, MSL4048 or MSL8096 Tape Libraries as capacity and performance needs change.
• Includes HP Data Protector Express Single Server Edition software for Windows/Linux/NetWare.

A set of rubber feet are included in the box if you choose to use the unit on a tabletop or desk. For additional structural rigidity, HP recommends the purchase of the 1/8 G2 Rack-to-Tabletop conversion kit which has a maximum load of 33 pounds (15 kilograms) and fully encloses the unit.

The 1/8 G2 Tape Autoloader includes HP StorageWorks Data Protector Express Single Server Edition backup/recovery software and the HP StorageWorks Data Protector Express Bare Metal Disaster Recovery option. Data Protector Express Single Server Edition is an easy-to-use backup application to protect a single Windows, Linux or NetWare server. With support for hardware data encryption, HP LTO-4 Ultrium Tape Drives are able to provide a safe and secure backup without the performance hit other methods to tape encryption might provide. The HP Data Protector Express Bare Metal Disaster Recovery (BMDR) option provides automated system recovery of that server following a major hardware or software failure.

As well as getting the Data Protector Express Single Server Edition software as part of the HP StorageWorks 1/8 G2 Tape Autoloader solution, purchasers can also upgrade to the class-leading Data Protector Express backup/recovery software. This is a special SKU, only available for new customers of HP StorageWorks tape products that gives a significant discount off Data Protector Express to recognize the value of the in-box software. Upgrading to Data Protector Express allows network backup of servers and Windows desktops, extends the disk-to-disk backup capacity and capability and permits the additions of agents and extensions to increase scale and performance of the backup infrastructure. For more information about the in-box software please visit: http://www.hp.com/go/dataprotectorexpress/sse.

If the HP StorageWorks 1/8 G2 Tape Autoloader is for a large environment that requires UNIX support and/or enterprise class application and feature support then HP Data Protector Software is the recommended backup/recovery software. For more information and evaluation software please visit: http://www.hp.com/go/dataprotector.

NOTE: HP Data Protector Express Software, Single Server Edition and HP OpenView Storage Data Protector, Single Server Edition are NOT compatible. Tape cartridges should NOT be shared between autoloaders and libraries running Data Protector and Data Protector Express.

The 1/8 G2 Tape Autoloader allows web-based remote manageability; the unit can be monitored and managed from across the room or across the globe. Functions included in the management tool include:

• Status information on the drive and system
• System configuration operations and reporting
• System error and status logs
• Library and drive firmware upload capabilities
• Diagnostic tests and information
• Cartridge movement for maintenance and management purposes
• Cleaning cartridge support
• Security and access control
• SNMP support for IP communications

To greatly enhance data privacy, HP StorageWorks 1/8 G2 Tape Autoloaders are now available with LTO-4 Ultrium 1760 hardware encrypting tape drives for secure high performance backups meeting consortium specifications for LTO-4. HP Data Protector Software can enable the drive encryption and provide basic key management capabilities. Additional ISV supporting hardware encryption information is available on the HP StorageWorks Enterprise Backup Solution website at: www.hp.com/go/ebs. The encryption on LTO-4 media occurs with or without compression, and without speed or capacity penalties. You can read LTO-2 and LTO-3 tapes, and write LTO-3 tapes, but hardware encryption is not supported in these formats.

LTO-4 uses the Advanced Encryption Standard (AES) with the longest and most secure keys -- 256 bits. AES-256 is implemented within Galois Counter Mode (GCM). This is a method of increasing AES security by efficiently adding Message Authentication Codes to ensure the integrity of the backup data stored on tape. The HP LTO-4 Ultrium 1760 Tape Drive is designed to be compliant with the emerging standard for tape drive security (IEEE 1619.1).

Protect the confidentiality and integrity of your data:
The encryption kit includes two USB key server tokens, product documentation, and firmware support. One encryption kit is needed per library or autoloader and it must be physically accessible so that the USB token can be inserted into the automation device. One of the two tokens will plug into the USB port in the autoloader or library and will generate and maintain encryption keys for the LTO-4 drives/libraries. The USB key server token uses a hardware random number generator, a cryptographic module running on FIPS 140-2 Level 3 validated hardware, password authentication, and digital envelopes for strong encryption keys and security operations. The second USB token is intended to provide a backup to the first. The keys are transferred securely token-to-token for backup or export, with no exposure to insecure PCs, servers, or networks. The encryption kit provides a self-contained solution for MSL libraries with no additional software, PCs, or servers required or involved.

Protect IT resources and meet compliance requirements:
With the HP StorageWorks 1/8 G2 & MSL LTO-4 Encryption Kit, users can enable or disable encryption, configure the USB key server tokens, restore encrypted data, as well as a variety of other tasks. In addition, the LTO-4 tape drives use the Advanced Encryption Standard (AES) with the longest and most secure keys -- 256 bits. AES-256 encryption is implemented using the Galois Counter Mode (GCM). This method adds Message Authentication Codes to ensure the integrity as well as privacy of the backup data stored on tape. The HP LTO-4 Ultrium Tape Drives are designed to be compliant with the emerging standard for tape media security (IEEE 1619.1).

Data Rate Matching combines sophisticated buffer management with the HP exclusive variable Adaptive Tape Speed technology, to allow the tape drive to match its transfer rate to the host speed dynamically and continuously across the wide range of transfer rates. This feature ensures that the tape drive continues to stream data regardless of the environment, and brings three big advantages:

• It optimizes performance and maximizes overall efficiency, allowing the drive to respond immediately to any speed changes from the host.
• It minimizes rewinding and repositioning of the tape, significantly reducing physical wear and increasing reliability.
• It minimizes the power requirements for the drive by reducing the number of repositions needed.

Critical to the success of data retention policies in highly regulated environments is the ability to store and manage data in an unalterable state. Following stringent guidelines set forth by regulatory agencies such as the SEC and HIPPA, IT organizations must now integrate new solutions and policies that can verify the integrity of stored data for periods that can extend well beyond seven years.
The LTO-4 Ultrium and LTO-3 Ultrium tape drives feature the ability to archive and store data in a non-rewriteable format that meets the most stringent regulatory guidelines. Using a combination of integrated fail-safe features in the drive firmware, cartridge memory, and tape formatting, the LTO-4 Ultrium and LTO-3 Ultrium can archive large amounts of data for periods of up to 30 years in a secure, untampered state. Since all LTO-4 Ultrium and LTO-3 Ultrium tape drives include support for both rewritable and WORM media, IT organizations can now easily integrate a secure, long-term archiving solution into their current data protection strategy. As compared to other technologies that feature support for WORM storage, the LTO-4 Ultrium and LTO-3 Ultrium tape drives offer the advantages of:

• A single drive to support all backup and archiving needs
• Two distinctive tape cartridges to easily distinguish and manage both rewriteable and WORM data cartridges
• A specially designed WORM data cartridge with multiple integrated fail-safe features to prevent accidental or intentional overwriting of data
• High-capacity, low-cost HP WORM media that can store up to 1.6 TB of data on a single data cartridge
• Support from many backup and archiving software vendors, providing the most comprehensive and mainstream support in the industry
• The LTO open standard that offers greater choice and compatibility across all third- and fourth-generation LTO Ultrium products

NOTE: While all HP LTO-4 Ultrium and LTO-3 Ultrium tape drives support LTO Ultrium WORM media, some third- and fourth-generation LTO Ultrium tape drives from other manufacturers may not include read and write support for LTO Ultrium WORM media. For non-HP third- and fourth-generation LTO Ultrium tape drives, please check the manufacturers' specifications to ensure this support is provided if you are using your WORM media. If WORM support is not provided, the drive will eject the WORM tape cartridge immediately upon insertion into to the tape drive.

The 1/8 G2 Tape Autoloader is supported on The HP industry-leading diagnostic tool - HP StorageWorks Library and Tape Tools (L&TT). L&TT is a single, convenient program that's a snap to install and simple to operate. L&TT's intuitive user interface eliminates the need for training and deploys in less than five minutes. This robust diagnostic tool is designed for both the experienced professional and the untrained administrator. It ensures product integrity through self-diagnostics and fast resolution to device concerns. Additional information on L&TT plus download information can be found at: http://www.hp.com/support/tapetools.

HP recommends that you use HP-branded cartridges in the 1/8 G2 Tape Autoloader to assure the highest level of protection for your valuable data. The test program for HP media is the most thorough and comprehensive in the industry.

All HP cartridges must satisfy an exhaustive battery of additional tests that relate directly to real life situations, where real data and real businesses are at stake. The benefit of the HP brand specification for media is consistent quality. Through the testing of thousands of HP drives and HP cartridges, the ideal formulation for backup performance is defined and then continuously monitored. This hugely resource-intensive process is unique to HP and affords deep insight into the HP+HP backup solution for a wide range of environments and duty cycles. Your best choice for ease of support and maximum dependability is to use HP-branded Ultrium cartridges at all times.

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed. Customization must comply with all relevant product specifications and factory supported configurations.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, and HP 9000 servers as well as MSA, VA7xxx, EVA, and XP disk arrays, rackable tape libraries and configurable network switches.

Type of service support varies by platform and product family. For more information on Factory Express services for your specific server model or storage device please contact your sales representative or go to: http://www.hp.com/go/factory-express.

NOTE: The 1/8 G2 Tape Autoloader requires an HBA with multiple LUN support and should not be used with RAID or Array controllers.

Reference the EBS compatibility matrix for the most up-to-date software compatibility information at: http://www.hp.com/go/ebs.

The warranty for this product consists of 1-year parts exchange, next business day.

• Response - Upgrade on-site response from next business day to same day 4-hours
• Coverage - Extend hours of coverage from 5 days x 9 hours to 7 days x 24 hours
• Duration - Select duration of coverage for a minimum period of 1 year or multiple years

HP Care Pack is defined as an upgrade to the product warranty attribute, available for a specific duration and hours of coverage.

• HP Care Pack is not available for less than the products warranty duration.
• HP Care Pack is available for sale anytime during the warranty period for most products, but the commencement date will be the same as the warranty start date (delivery date to end user customer). Proof of purchase may be required.
• HP Care Pack services are prepaid.

For additional HP Care Pack (hardware & software) information, as well as orderable part numbers, please refer to the URL http://www.hp.com/hps/carepack/.

• Installation services
• On-site Maintenance (includes warranty support)
• Response time upgrades during the warranty period
• Post-warranty coverage
• RAID setup and performance consulting via statement of work
  

HP eSupport is a portfolio of technology-based services that assist you with managing your business environment - from the desktop to the data center.

Support Portal
The HP support portal provides one-stop access to the information, tools and services you need to manage the daily operations of your IT environment.

Features include:

• Access to self-solve tools (including search technical knowledge base)
• Efficient logging and tracking of support cases
• Collaboration with other business and IT professionals
• Download of patches and drivers
• Access to diagnostic tools
• Proactive notification of relevant information

Access to certain features of the support portal requires an HP service agreement. To access the support portal, visit: http://www.hp.com/support

HP Services provides up to a three-year, limited warranty, fully supported by a worldwide network of resellers and service providers and 9x5 hardware technical phone support during the warranty period. In addition, available service offerings include a full range of optional packaged hardware and software services:

• Installation and start up
• Extended coverage hours and enhanced response times
• System management and performance services
• Availability and recovery services

The following brick level options/components do not have individual HP Care Pack Services. These items will be included in product HP Care Pack Services into which they are installed.

Kit Contents (for each autoloader):

• SCSI models:
  
  • (1) 1.83M US Power Cord, C13, 10A
  • (1) 2.5M PDU Power Cord, C13/C14, 10A
  • (1) 6' VHDCI to HDTS68 SCSI cable
  • (1) RJ-45 Ethernet cable
  • (1) HDTS68 SCSI terminator
  • Set of six rubber feet (for tabletop use)
  • HP Data Protector Express Software CD (for use in downloading the Single Server Edition for Windows/Linux/NetWare)
  • Documentation kit including User & Service Guide (CD) and Getting Started Poster
• SAS models:
  
  • (1) 1.83M US Power Cord, C13, 10A
  • (1) 2.5M PDU Power Cord, C13/C14, 10A
  • (1) 2M External Infiniband (SFF8470) to Mini SAS (SFF8088) 1x SAS Cable
  • (1) RJ-45 Ethernet cable
  • Set of six rubber feet (for tabletop use)
  • HP Data Protector Express Software CD (for use in downloading the Single Server Edition for Windows/Linux/NetWare)
  • Documentation kit including User & Service Guide (CD) and Getting Started Poster

HP Ultrium 800GB WORM Data Cartridge (1 pack)

© Copyright 2009 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

For tape drives and media, 1 GB = 1 billion bytes. Actual formatted capacity is less.