2.

• Optional -48V DC power supply
  
• New 300GB SFF SAS drives supported

The HP ProLiant DL580 G5 is the best in class platform for virtualization, combining Intel's newest Xeon® processor technology, maximum scalability and high availability features. This 4-socket server offers unsurpassed flexibility and serviceability in a versatile, 4U rack-optimized form factor. Based on the latest industry standard technologies, the DL580 G5 provides the highest levels of performance demanded by today's compute intensive applications.

• Processors:
  • 6-Core Intel® Xeon® 7400 or 7300 series processors
  • Supports up to four Intel® Xeon® 7400-, 7300-sequence or Intel® Dual-Core Xeon® processor E7220
  • Intel Core™ Microarchitecture with Intel Virtualization Technology FlexMigration
  • Industry Standard Intel® 7300 Chipset with four high-speed interconnects at 1066 MT/s
• Memory:
  • PC2-5300 Fully Buffered DIMMs (DDR2-667)
  • Can be configured in Mirrored, Online Spare, or Advanced ECC modes
• Storage Controller:
  • 2P Base Models: HP Smart Array P400i/256MB Controller (optional 512MB BBWC upgrade)
  • 4P Base Models: HP Smart Array P400i/512MB BBWC Controller
• Internal Drive Support:
  • Support for up to 16 hot plug SFF SAS drives
  • Slimline DVD Drive standard, Half-height Tape Drive optional on all models
• Network Controller:
  • Two embedded NC373i Multifunction Gigabit Network Adapters with TCP/IP Offload Engine, including support for Accelerated iSCSI through an optional Licensing Kit
• Expansion Slots:
  • More PCI-Express slots with up to eleven available with option card
  • Eight slots standard: (4) full length PCI-E x8, (1) full length PCI-E x4 and (3) half length PCI-E x4 slots; Optional card adds (3) PCI-X or (3) PCI-E x8
• USB 2.0 Ports:
  • 5 Total: (2) front, (2) rear, (1) internal
• Redundancy:
  • Rear accessible Hot Plug Power Supplies with option for Redundancy (Redundant power supplies are standard on some models)
  • Hot Plug Fans with full redundancy
• Management:
  • HP Insight Control suite delivers essential management, including proactive health management, lights out remote control, optimization of power usage, rapid server deployment, performance analysis, vulnerability scanning and patch management and virtual machine management. For more information, go to www.hp.com/go/ice.
    
  • HP ProLiant Onboard Administrator (powered by the Integrated Light-Out 2 management processor) for simplified server setup, health monitoring and recovery, power and thermal control, and lights-out remote administration
    
  • Integrated Lights-Out 2 Advanced unlocks the full capabilities of the ProLiant Onboard Administrator with high performance Integrated Remote Console, multi-user console sharing, video record and replay, and virtual media, including virtual folders for rapid server updates.
    
• Form Factor:
  • Dense form factor - 4U rack models
• Operating Systems:
• Supports Windows, RHEL, SLES, OEL, Solaris, NetWare VMware, and HP Citrix Essentials for XenServer
• Deployment/Serviceability:
  • Front and rear video ports
  • Front accessible Processor, Processor Power Modules and Memory allow server to stay safely secured in the rack during servicing
  • Quick Deploy Rail System includes sliding universal rails, an ambidextrous cable management arm and quick release levers for fast and easy serviceability and in-rack tool-less access to major components
  • Tool-less access to all system components for easy in rack serviceability
  • Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement
• Warranty:
  • This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. SATA hard drives have a one-year warranty. SAS Enterprise drives have a three-year warranty.
    NOTE: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

• Standard on 4P Base Models, optional with others
• Battery charge/life: Up to 72 hours/3 years
• Transportable data protection
• Increases overall controller performance

HP Insight Control suite (ICE) delivers essential infrastructure management, including proactive health management, lights out remote control, optimization of power usage, rapid server deployment, performance analysis, vulnerability scanning and patch management and virtual machine management. HP Insight Control Environment installs and licenses the following components by default using a wizard-based integrated installer:

• HP Systems Insight Manager software
  
• HP Integrated Lights-Out 2 Advanced
  
• HP Insight Power Manager software
  
• HP Insight Performance Manager module
  
• HP Insight Vulnerability and Patch Manager module
  
• HP Insight Virtual Machine Manager software for ProLiant
  

Additional Insight software and management tools included on the Insight Software media kit can be installed manually

• HP Insight Server Migration software for ProLiant
  NOTE: HP Server Migration software for ProLiant ---- is licensed separately from the HP Insight Control suite.
  
• HP Open Service Event Manager
  
• HP Service Essentials Remote Support Pack
  

NOTE: Insight Server Migration software for ProLiant can be installed from the SMP CD included in the Insight Software DVD media kit.
NOTE: For additional product and licensing information about HP Insight Control suite, visit: http://www.hp.com/go/ice.

NOTE: As of Feb. 1, 2009, HP iLO Power Management Pack is being discontinued. Customer can either purchase HP Insight Control Environment suite which contains all the components of IPMP or the standalone components which include iLO Advanced, Insight Power Manager and System Insight Manager.
HP Insight Control suite for Linux (ICE-Linux) provides comprehensive discovery, imaging & deployment, monitoring, and management for Linux-based ProLiant server platforms. Built on the industry-leading HP Systems Insight Manager framework, this solution integrates open source technology with experience leveraged from HP's Linux products in HP ICLE and HP XC Clusters, while providing paths to the future with developing management technologies.

HP Insight Control suite and most HP Insight software products include a one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: http://www.hp.com/services/insight.

HP ProLiant Onboard Administrator (powered by the Integrated Lights-Out 2 management processor) simplifies server setup, health monitoring, power and thermal control, and lights-out remote administration of ProLiant ML, DL, and BL servers. HP ProLiant Onboard Administrator functions without additional software, and can be accessed from any location via a web browser. It works hand-in-hand with HP Systems Insight Manager, Insight Control, and Insight Dynamics - VSE suite helping customers unlock the value of the ProLiant platform and deliver the highest possible quality of IT service to the business.

Capabilities of the HP ProLiant Onboard Administrator embedded in ProLiant ML/DL servers include, but are not limited to the following:

• Rom-based Setup Utility (RBSU) and Option Rom Configuration for Arrays (ORCA)
  
• IML and iLO event logging
  
• Automatic Server Recovery (ASR)
  
• OS independent hardware health status
  
• Present server power consumption
  
• Virtual Unit ID control
  
• Remote serial console
  
• Virtual power button control
  
• Dynamic Sector Repairing (with Smart Array controller)
  
• Drive Parameter Tracking (with Smart Array controller)
  
• Hot Spare Boot
  NOTE: Upon the event of a failed processor in a multi-processing environment, the system will automatically reboot and attempt to use the remaining good processor.
  

Unlock the full remote administration capabilities of HP ProLiant Onboard Administrator with Integrated Lights-Out 2 Advanced.

Upgrading, replacing, or virtualizing your existing server? Effortlessly transition to new virtual or physical HP ProLiant servers or BladeSystem with automated, accurate and affordable migration of OS, application and data. HP Insight Server Migration software for ProLiant automates the manual processes required for migrating servers between physical or virtual platforms, whether migrating to VMware or Microsoft virtual machines. SMP Universal allows all of the following migrations:

• physical to ProLiant
  
• physical to virtual
  
• virtual to virtual
  
• virtual to ProLiant
  

NOTE: For more information, visit: http://www.hp.com/go/migrate.

The HP Insight Dynamics - VSE suite for ProLiant is advanced infrastructure management software that allows you to analyze and optimize your adaptive infrastructure to manage physical and virtual resources in the same way. HP Insight Dynamics - VSE gives you a powerful toolkit to accelerate complex technology projects and simplify daily operations. It enables you to plan capacity and power continuously, balance across physical and virtual resources, ensure cost-effective high availability and provision infrastructure consistently.

NOTE: For more information, visit: http://www.hp.com/go/insightdynamics

Managing the growing number of servers can be complex and expensive for your organization. IT managers need to address changing business needs with tools that meet the challenges of managing today's complex Datacenters.

HP provides management solutions that are designed to simplify a server's installation, configuration and maintenance throughout the entire server lifecyle. This provides the customer with higher levels of operational efficiency and highly reliable systems: www.hp.com/go/foundation.

The foundation pack includes:

• HP SmartStart
  
• HP Management
  
• HP ProLiant Firmware Maintenance
  

SmartStart version supported (minimum): SmartStart 7.91.
http://www.hp.com/servers/smartstart

The Insight Management Agents should be installed on all HP servers to present system instrumentation, health and configuration information into HP Systems Insight Manager and the HP System Management Homepage. The HP System Management Homepage aggregates systems data from Insight Management Agents and other HP management tools, providing a consolidated browser-based interface for managing individual servers.

Insight Management Agents and The HP System Management Homepage are included on ProLiant Support Packs, and can also be installed using the server profiles provided with the ProLiant Essentials Rapid Deployment Pack.

For additional information about the Management Agents and the HP System Management Homepage please visit the management Web site at: http://www.hp.com/servers/manage.

HP Serviceguard for Linux provides high availability clustering for Linux applications running on HP Integrity, HP ProLiant and other supported industry-standard servers. Serviceguard for Linux reduces planned and unplanned downtime and delivers efficient, continuous access to business-critical applications - with all of the enterprise features you expect from HP.

This high availability clustering solution is designed to protect applications and services from a wide variety of software and hardware failures, monitoring the health of each server (node) and quickly responding to failures such as those that affect system processes, system memory, LAN media and adapters, and application processes.

For the most recent list of Linux distributions & kernels, servers and storage supported with Serviceguard for Linux, please see:
ftp://ftp.compaq.com/pub/products/servers/ha/linux/SGLX_Certification_Matrix.pdf

The following is a quick summary of HP Serviceguard for Linux features and support:

• Supported Virtual Machines
  • SG/LX in HP Integrity Virtual Machines guests
  • SG/LX in VMware ESX guests
  • SG/LX in Red Hat and SUSE Xen hosts (DOM0)
• Application Integration Toolkits
• HP Serviceguard for Linux Oracle Database Toolkit
• HP Serviceguard Extension for SAP on Linux (SGeSAP/LX)
• Free Application Integration Toolkits:
  • Apache
  • MySQL
  • NFS
  • PostgreSQL
  • Samba
  • Tomcat
  • Sendmail
• Disaster Tolerant Solutions
• HP Serviceguard for Linux Extended Distance Cluster (XDC) extends cluster distances up to 100 km, utilizes software RAID mirroring for data replication and is storage array independent
• HP StorageWorks XP/EVA Cluster Extension Software for Linux (CLX) works seamlessly with HP Serviceguard for Linux, HP StorageWorks Continuous Access, and HP Disk Arrays to automate failover and failback between sites
• Software updates are distributed by HP Services to customers with support contracts

NOTE: For additional information including software and server support on HP Serviceguard for Linux, visit: http://www.hp.com/go/sglx or see the HP Serviceguard for Linux QuickSpecs.
NOTE: HP Serviceguard for Linux products for HP ProLiant and select 3rd party x86 class servers include one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: http://www.hp.com/services/swsupport.

HP Advanced Memory Protection Technology - delivers unsurpassed memory protection and server availability with the following supported modes of operation:

• Advanced ECC
  Advanced ECC Memory is the default memory protection mode for the HP ProLiant DL580 G5. In Advanced ECC, the server is protected against correctable memory errors. The server will provide notification if the level of correctable errors exceeds a predefined threshold rate. The server does not fail because of correctable memory errors.
  Advanced ECC provides additional protection over Standard ECC in that it is possible to correct certain memory errors that would otherwise be uncorrectable and result in server failure. Whereas Standard ECC can correct single-bit memory errors, Advanced ECC can correct single-bit and multi-bit memory errors if all failed bits are on the same DRAM device on the DIMM.
  
• Online Spare Memory
  Offers a higher level of memory protection than Advanced ECC alone. If the number of single-bit correctable errors on a bank exceeds the pre-defined error threshold, that bank will fail over to the online spare bank without intervention or server interruption. The failed memory can then be replaced at the user's convenience during a scheduled maintenance window.
  Online Spare Memory is achieved by protecting active memory with online spare memory on the same memory board. No operating system support is required.
  
• Mirrored Memory
  Mirrored Memory provides a higher level of availability than Advanced ECC and Online Spare Memory. With Mirrored Memory, the server is protected against uncorrectable memory errors that would otherwise result in server failure. Mirrored Memory allows the server to keep two copies of all memory data. If an uncorrectable error is encountered, the proper data is retrieved from the copy of memory that did not fail.
  

• Smart Array P400i Controller with optional Battery Backed Write Cache (BBWC) Enabler provides transportable data protection and increases overall controller performance. Up to 512MB Battery Backed Write Cache protection optional on HP ProLiant DL580 G5 (512MB BBWC ships standard with 4P Base Models).
• Hot Plug Redundant Fans - Six Hot Plug Redundant Fans ship standard with all models.
• Front Accessible Chassis - Redesigned chassis allows access to memory, processors and hard drives from the front of the server while it remains safely engaged in the rack. This provides easier serviceability and lowers the chance of interfering with neighboring servers' cables and components.
• Hot Plug Universal Drives - Up to sixteen Hot Plug Universal SFF SAS drives are supported.
• Hot Plug Redundant Power Supplies - Four Hot Plug Redundant Power Supplies ship standard with all 4P Base Models (Hot Plug Redundant Power Supplies are optional with 2P Base models).

• Front and Rear accessibility provides unsurpassed serviceability by allowing the server to remain safely secured in the rack while maintaining Hot Plug Universal Hard Drives, Hot Plug Redundant Power Supplies, Memory, as well as Processors and Processor Power Modules.
• Innovative Diagnostic Lighting
• Systems Insight Display - precisely depicts all major subsystems of the server (Processors, Memory, CPU, Fans, Processor Power Modules (PPMs), circuit board Interlock, over-temperature status) and gives instant visual indication of fault status.
• Tool-less interior design
  • Tool-less access to interior of server
  • Rear Access to Hot Plug Redundant Power Supplies
  • PCI Card Guides locks full length PCI cards in place
  • Six individually removable fans connect without cables to the system board
  • Processor Retention Cage securely locks Processors into their sockets
  • Tool-less removal of system board
• Quick Deploy Rails
  • Tool-less design "snap in" rail and ambidextrous cable management arm

HP ProLiant DL580 G5 rack models provide tool-free support for racks with square or round mounting holes (including Compaq/HP 7000, 9000, 10000, HP/E series and H9 series) with an adjustment range from 24" - 36" in depth. The ambidextrous cable management arm can be mounted on either the left or right side for improved cable management.
NOTE: Cable management arm must be removed to access Hot Plug Power Supplies when the cable management arm is mounted on the right.

HP ProLiant DL580 G5 in Telco Racks
Support for all 2-post Telco racks requires the use of the standard rack kit and an additional option kit from Rack Solutions (http://www.racksolutions.com/hp/)

The HP eConfigure-Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.
http://www.hp.com/products/configurator.

HP Care Pack services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server and purchased at the same time or afterward that are internal to the enclosure. This also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included, and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalizing on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions, provides a range of support services designed to meet the varying needs of your business. Whether an SMB, or large global corporation, HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service - simplify ProLiant solution implementation, maintenance, and management.

• Support: 3-Year 4-Hour response 24x7 Same Business Day Coverage only
  
• Deployment Service: Installation and Start up only

Enhanced Service - optimize service level to increase IT performance and availability.

• Support: 3-Year Support Plus 24 only

Refer to the information on "Installation & Start-Up" for service on ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet; to be delivered on a scheduled basis 8am-5pm, M-F, excluding HP holidays.

NOTE: For a complete listing of service offerings and information visit:
http://www.hp.com/services/proliantservices
http://www.hp.com/go/proliant/carepack

The ProLiant DL580 G5 server is an enterprise class, 4 socket server designed for maximum scalability and high availability. Its innovative chassis offers unsurpassed flexibility and serviceability in a versatile form factor. Based upon the latest industry standard processing, memory, I/O and networking technologies, the ProLiant DL580 G5 provides the highest levels of performance demanded by today's compute intensive applications. Unparalleled high availability features, including hot-plug and redundant components, guarantee maximum uptime. Integrated Lights-Out 2 (iLO2) technology allows remote administration from a standard web browser without ever having to visit the server. Within the 4U dense form factor, it's highly expandable architecture provides maximum application deployment flexibility with the ability to add PCI-Express, PCI-X or battery-backed write cache options. Innovative features, such as the ability to access processors, memory, hard drives, and power supplies while the unit remains secured in the rack, enable rapid response to service events, radically decreasing overall IT costs and server downtime.

Typical Usage:
Space-constrained corporate data centers and service providers

• With up to 4 TB of internal storage, 32 DIMM sockets and PCI-Express or PCI-X options; the HP ProLiant DL580 G5 packs the storage, memory, and I/O you need in a versatile, 4U chassis
• Ambidextrous cable management and a quick deploy rail solution make racking a snap
• Availability features including hot plug redundant power, hot plug redundant fans, and hot plug RAID hard drives keep environments up and running and users productive

Database, Messaging and Business Applications

• The latest Intel® Xeon® processors with FBDIMMs and large internal storage capacity provide scalability for everything from web apps to mail servers to databases
• Eight standard PCI-Express slots and the ability to add either three additional x8 PCI Express or three PCI-X slots, provide powerful and flexible I/O alternatives
• Two integrated multi-function gigabit NICs give you the connectivity and bandwidth needed in today's database or business applications environments
• Easily attach to SAN or NAS and manage from one location

Server Consolidation

• Scalability, availability and built-in serviceability make the HP ProLiant DL580 G5 the perfect platform for server consolidation solutions
• The ProLiant HP DL580 G5 and ProLiant Essentials make it easy to deploy, manage, and migrate virtualized servers with VMware or Microsoft Virtual Server
• Integrated Lights-Out 2 enables administrators to manage the HP ProLiant DL580 G5 from remote locations

NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section.

800/1200W AC Power Supply

AG072A

Memory

Embedded DIMM Sockets

1

2

3

8

NOTE:

• Memory channel 1 includes slots 1-4
• Memory channel 2 includes slots 5-8
• Memory channel 3 includes slots 9-12
• Memory channel 4 includes slots 13-16

Memory

Embedded Slots

1

2

3

8

Standard Memory
4 GB PC2-5300 Fully Buffered DIMMs (DDR2-667) (4 x 1 GB)
All HP ProLiant DL580 G5 systems come standard with 4 banks of memory sockets spanning 4 memory channels for a total of 16 DIMM sockets on board memory. The optional DL580 G5 Memory Expansion Boards Option adds an additional 16 DIMM sockets, which brings the Dl580 G5 to a total of 32 DIMM sockets.

Upgrading Memory and Memory Interleaving
To achieve maximum memory performance and flexibility, the HP ProLiant DL580 G5 requires memory to be upgraded in groups of four identical FBDIMMs populated across the four memory channels. In simple terms, the two FBDIMM locations at xC and the two xD locations must be populated with four identical part numbered FBDIMMs. Memory population continues by populating locations xE and xF, then xG and xH. FBDIMM architecture does not allow any gaps in this sequence such that if locations xE and xF were populated and xC and xD were not, the memory at xE and xF would not be recognized by the system.

Standard Memory Plus Optional Memory
Up to 228 GB memory is available with the standard memory of 4 GB and the optional installation of 1 GB, 2 GB, 4 GB, and/or 8 GB PC2-5300 Fully Buffered DIMMs (DDR2-667) in all embedded DIMM sockets as well as the memory expansion boards slots. One possible configuration is shown below, in which 56 GB is added to the standard 4 GB for a total of 60 GB.

Standard Memory Replaced with Optional Memory
Up to 256 GB of memory is available with the removal of the standard 4 GB of memory and the optional installation of PC2-5300 Fully Buffered DIMMs in all the embedded slots as well as the memory expansion boards slots.

Memory

Embedded Slots

1

2

3

8

Standard Memory
8 GB PC2-5300 Fully Buffered DIMMs (DDR2-667) (4 x 2 GB)
All HP ProLiant DL580 G5 systems come standard with 4 banks of memory sockets spanning 4 memory channels for a total of 16 DIMM sockets on board memory The optional DL580 G5 Memory Expansion Boards Option adds an additional 16 DIMM sockets, which brings the Dl580 G5 to a total of 32 DIMM sockets.

Upgrading Memory and Memory Interleaving
To achieve maximum memory performance and flexibility, the HP ProLiant DL580 G5 requires memory to be upgraded in groups of four identical FBDIMMs populated across the four memory channels. In simple terms, the two FBDIMM locations at xC and the two xD locations must be populated with four identical part numbered FBDIMMs. Memory population continues by populating locations xE and xF, then xG and xH. FBDIMM architecture does not allow any gaps in this sequence such that if locations xE and xF were populated and xC and xD were not, the memory at xE and xF would not be recognized by the system.

Standard Memory Plus Optional Memory
Up to 232 GB memory is available with the standard memory of 8 GB and the optional installation of 1 GB, 2 GB, 4 GB, and/or 8 GB PC2-5300 Fully Buffered DIMMs in all embedded DIMM sockets as well as the memory expansion boards slots. . One possible configuration is shown below, in which 56 GB is added to the standard 8 GB for a total of 64 GB.

Standard Memory Replaced with Optional Memory
Up to 256 GB of memory is available with the removal of the standard 8 GB of memory and the optional installation of PC2-5300 Fully Buffered DIMMs in all the embedded slots as well as the memory expansion boards slots.

Memory

Embedded Slots

1

2

3

8

NOTE:

• Memory channel 1 includes slots 1-4 (on board) and 17-21 (expansion board #1)
• Memory channel 2 includes slots 5-8 (on board) and 21-24 (expansion board #2)
• Memory channel 3 includes slots 9-12 (on board) and 25-28 (expansion board #3)
• Memory channel 4 includes slots 13-16 (on board) and 29-32 (expansion board #4)

The following memory options are available from HP:

2 GB FBD PC2-5300 2 x 1 GB Dual Rank Kit

2 GB FBD PC2-5300 2 x 1 GB Low Power Single Rank Kit

4 GB FBD PC2-5300 2 x 2 GB Low Power Dual Rank Kit

8 GB FBD PC2-5300 2 x 4 GB Dual Rank Kit

8 GB FBD PC2-5300 2 x 4 GB Low Power Dual Rank Kit

16 GB FBD PC2-5300 2 x 8 GB Dual Rank Kit

DL580 G5 Memory Expansion Boards Option
NOTE: This option consists of 4 memory expansion boards with 4 DIMM sockets each for a total of 16 additional DIMM sockets. This brings the DL580 G5 to a total of 32 DIMM sockets.

1

2

Slimline Drives

External Storage

Maximum Storage Capacity - (External SAS Enclosure Attached)

Internal

Nominal Efficiency (%)

Leakage Current (mA)

Maximum Inrush Current duration (msec)

System Unit Rack

Dimensions (H x W x D)
(with bezel)

6.94 x 19.0 x 26.5 in (17.6 x 48.3 x 67.3 cm)

Weight
(approximate)

Input Requirements
(per power supply)

- Click on the system of interest. Example: DL580 G5
- Follow the instructions of the next screens.

Relative Humidity
(non-condensing)

Altitude

Applicable Disk

DVD-ROM

DVD-R (Read Only)

2.6 GB/side DVD-RAM (Read Only)

5.2 GB/side DVD-RAM (Read Only)

CD-ROM Mode-1 data disc

Capacity

DVD-ROM

Diameter

120 mm (4.7 in), 80 mm (3.1 in)(with adapter at vertical mounting mode)

Tray type

EIDE (ATAPI)

Random

DVD-ROM < 120 ms, CD-ROM < 110 ms

Full-Stroke

DVD-ROM < 240 ms, CD-ROM < 160 ms

Audio Output Level (typical)

Line-out

CD 0.7 Vrms at 47 Kohms Load

DVD-ROM

Single Layer

CD-ROM

7.2 MB/sec. Max.

2 MB

Spin-up Time (typical)

less than 10 seconds

120,000 Power On Hours (POH)

Operating

-22° to 140° F (-30° to 60° C)

Operating

10% to 80%

Storage/Transportation

(HxWxD, maximum)

0.5 x 5.04 x 5.1 in (12.7 x 128 x 129.4 mm)

iLO 2 Advanced Features (optional)

Smart Array P400i Controller

Two embedded NC373i Multifunction Gigabit Server Adapters

Environment-friendly Products and Approach

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.