Overview

HP BladeSystem c3000 Enclosure for "Remote Sites" and "Small & Medium sized Businesses"


HP BladeSystem c3000 Enclosure – Tower – Front View		HP BladeSystem c3000 Enclosure – Tower – Rear View
1.	Device Bays 1 thru 8	1.	Local KVM interface
2.	Enclosure DVD Drive	2.	Interconnect Bay 1
3.	Standby Onboard Administrator	3.	Active Cool Fans
4.	Insight Display	4.	Interconnect Bay 2
5.	Active Onboard Administrator	5.	Enclosure Up-link and Service Port
		6.	Enclosure Down-link
		7.	iLO/Onboard Administrator Port
		8.	iLO/Onboard Administrator Port 2 (reserved for future)
		9.	Power Supplies
		10.	Interconnect Bay 4
		11.	Interconnect Bay 3


HP BladeSystem c3000 Enclosure – Rack – Front View		HP BladeSystem c3000 Enclosure – Rack – Rear View
1.	Device Bays 1 thru 8	1.	Local KVM interface
2.	Enclosure DVD Drive	2.	Interconnect Bay 1
3.	Standby Onboard Administrator	3.	Active Cool Fans
4.	Insight Display	4.	Interconnect Bay 2
5.	Active Onboard Administrator	5.	Enclosure Up-link and Service Port
		6.	Enclosure Down-link
		7.	iLO/Onboard Administrator Port
		8.	iLO/Onboard Administrator Port 2 (reserved for future)
		9.	Power Supplies
		10.	Interconnect Bay 4
		11.	Interconnect Bay 3

What's New

Support for Ethernet and FC SAN interconnects

At A Glance

This document covers the HP BladeSystem c3000 enclosure only. For more information on the HP c7000 enclosure, the HP ProLiant Server Blades, and HP BladeSystem c-Class Interconnect Components please see the following QuickSpecs:
HP c7000 Enclosure: HP ProLiant Server Blades:
http://h18000.www1.hp.com/products/quickspecs/north_america/12534.html
HP BladeSystem c-Class Interconnect QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12524_na/12524_na.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_na/12810_na.html

HP BladeSystem solutions start with a either a c7000 or c3000 Enclosure. For the c3000 Enclosure, customers can add c3000 power supplies, Active Cool Fans, a c3000 DVD drive, and if needed, an optional local KVM module. Once the enclosure has been selected, the following components can be added: networking interconnect modules, HP ProLiant and Integrity Server Blades, and optional Insight Control for BladeSystem management software. Please reference the QuickSpecs listed above.

HP BladeSystem c3000 Enclosures:
Offered in two different models: the c3000 Enclosure for racking in standard 19 inch racks, or the c3000 Tower Enclosure on casters for sites without racks.
Server blades, storage blades, interconnect modules, power supplies, fans, and Onboard Administrator modules are designed to fit into the c3000 enclosure.
The HP BladeSystem c3000 enclosure is:
- A single-phase enclosure available for use with in-rack PDUs & UPSs which accept C13/C14 power cords; or
- Alternatively, with low-line (100VAC to 110VAC) power outlets, the enclosure's power supplies can be connected directly to low-line wall outlets.
  NOTE: Caution: when connecting directly to wall outlets, customers should determine the maximum amperage of the wall outlet circuit to prevent power overload. See Technical specification section in this document for the individual power supply amperage.
HP BladeSystem c3000 enclosure options:
- Optional HP 1200W High Efficiency AC Common Slot Power Supplies (up to 6 total)
- Optional c-Class Active Cool fans (between 4 and 6 total)
- Optional KVM module
- Optional DVD drive (if not part of an enclosure bundled part number)
- Optional Rack rails (if not part of an enclosure bundled part number)
- Optional HP 1200W -48V DC Common Slot Power Supplies (up to 6 total)
- Optional HP BLc3000 Tower Security Option
The c3000 enclosure is 6U and holds up to 8 HP c-Class server blades:
- Up to 8 half-height server blades (examples: HP ProLiant BL 260c G5, BL2x220c G5, BL460c G6, BL465c, BL465c G5, BL495c G5 Server Blade)
- Up to 4 full-height server blades (Examples: HP ProLiant BL480c, BL 680c G5, BL685c, BL685c G5 Server Blades)
- Up to 4 HP SB40c Storage blades attached to half-height server blades
- Up to 4 PCI Expansion blades attached to half-height server blades
- Or combinations of the above.
- For additional server & storage blade information, please visit: http://h18000.www1.hp.com/products/quickspecs/north_america/12534.html
Types of interconnect modules available: (up to 4 per enclosure)
- Ethernet Interconnect Switches from Cisco & Blade Network Technologies (BNT)
- Ethernet Pass-Thru modules
- Virtual Connect Ethernet modules (requires VC Management firmware v1.20 or greater)
- Fibre Channel Interconnect Switches from Brocade & Cisco
- Virtual Connect Fibre Channel modules
- Fibre Channel Pass-Thru module.
- InfiniBand Switch modules
- For additional HP BladeSystem c-Class Interconnect Component information, please visit: http://h18000.www1.hp.com/products/quickspecs/12524_na/12524_na.html
Infrastructure Management:
- HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, migrate, monitor, control and optimize your IT infrastructure through a single, simple management console. Insight Control supports both Windows and Linux-based central management servers.
- HP Insight Dynamics for ProLiant, a product option, is an integrated command center that enables IT Staff personnel to continuously analyze and optimize a converged infrastructure, while automating and reducing the cost of common data center tasks by as much as 40 percent. This ultimately enables them to dynamically keep pace with the organization's changing business requirements.
Warranty:
- This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. SATA hard drives have a one year warranty. SAS hard drives have a three year warranty.
  NOTE: Server Blade Enclosure Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support.
- For additional information please visit:
  http://h18004.www1.hp.com/products/blades/components/components.html

Models

HP BladeSystem c-Class Server Blade Enclosures	Rack Models - Supports a full enclosure of 8 blades
	HP BladeSystem c3000 Rack Enclosure with 8 Insight Control Licenses NOTE: Includes 4 AC Power Supplies, 6 Active Cool 100 Fans, DVD drive, Rail Kit, Onboard Administrator DDR2 module and 8 Insight Control Licenses.	508664-B21
	HP BladeSystem c3000 Rack Enclosure with 8 Insight Control Trial Licenses NOTE: Includes 4 AC Power Supplies, 6 Active Cool 100 Fans, DVD drive, Rail Kit, Onboard Administrator DDR2 module, and 8 Insight Control Trial Licenses.	508665-B21
	Rack Models - A "starter" enclosure that supports up to 4 blades
	HP BladeSystem Single-Phase c3000 Enclosure NOTE: Includes 2 AC Power Supplies, 4 Fans, an Onboard Administrator DDR2 module, a DVD drive, rail kit, and 8 Insight Control Trial Licenses; additional power supplies and fans can subsequently be added to support more than 4 blades.	536841-B21
	Tower Models - Supports a full enclosure of 8 blades
	HP BladeSystem c3000 Tower Enclosure with 8 Insight Control Licenses NOTE: Includes 4 AC Power Supplies, 6 Active Cool 200 Fans, DVD drive, Onboard Administrator module, and 8 Insight Control Licenses.	458033-B21
	HP BladeSystem c3000 Tower Enclosure with 8 Insight Control Trial Licenses. NOTE: Includes 4 AC Power Supplies, 6 Active Cool 200 Fans, DVD drive, Onboard Administrator module, and 8 Insight Control Trial Licenses.	458032-B21
	Tower Models - A "starter" enclosure that supports up to 4 blades
	HP BladeSystem c3000 Tower Enclosure NOTE: Includes 2 AC Power Supplies, 4 Fans, an Onboard Administrator module, a DVD drive and Insight Control Trial Licenses; additional power supplies and fans can subsequently be added to support more than 4 blades.	469499-B21
	HP BladeSystem c3000 Tower Enclosure NOTE: Includes 2 AC Power Supplies, 4 Fans, an Onboard Administrator module, a DVD drive and 8 Insight Control Licenses; additional power supplies and fans can subsequently be added to support more than 4 blades.	469500-B21

Smart Buys

	The ProLiant Smart Buy program offers a collection of promotional server and option products that are configured with SMB in mind, offered at discounted prices, and positioned for quick delivery. Smart Buy server offers are available for a limited time only.
	HP BladeSystem c3000 Enclosure Smart Buy Tower Model with HP (BNT) Switch NOTE: Includes 2 Power Supplies, 4 Fans, an Onboard Administrator module, a DVD drive, rail kit, 1GbE2c Layer 2/3 Ethernet Blade Switch, and 8 Insight Control Environment 30 Day Trial Licenses	481658-001
	HP BladeSystem c3000 Enclosure Smart Buy Rack Model with HP (BNT) Switch	579021-001
	NOTE: Includes GbE2c Layer 2/3 Ethernet Blade Switch for HP c-Class BladeSystem, Two (2) Power Cord C20 C13 15A Universal Jumper 2m, 2 AC power supplies and 4 Active Cool Fans, a DVD drive, rack rails, and a single DDR2 Onboard Administrator module.
	Smart Buy Options
	HP Smart Buy ICE Nm 1-Svr 24x7 Support	452148-S22
	NOTE: HP Smart Buy Insight Control Environment, No Media 1-Server License including 1 year of 24x7 Technical Support and Updates
	HP S-Buy 3y 4h 13x5 c-3000 Encl. HW Supp	UH961E
	HP S-Buy 3y 4h 24x7 c-3000 Encl. HW Supp	UH962E
	HP S-Buy 3y 6hr 24x7CTR c3000 Encl HWSup	UM367E

HP BladeSystem c-Class Overview

NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/erc/downloads/4aa0-5978enw.pdf

HP BladeSystem Overview

As server, storage and network technologies have changed; traditional rack-mounted infrastructure solutions have generated increased complexity of both infrastructure management and physical datacenter deployment.

HP BladeSystem is the evolution of rack-mounted and pedestal infrastructure. A BladeSystem reduces costs and simplifies the management, building, and maintenance of the infrastructure behind your multi-server environment. It consolidates and repackages all the supporting infrastructure elements-compute, storage, network, and power into a single platform that can accelerate the integration and optimization of your data center.

The HP BladeSystem c3000 enclosure has the flexibility to scale from a single enclosure holding up to 8 blades, to a rack containing 7 enclosures holding up to 56 blades, the c-Class infrastructure is designed to meet the needs of today's businesses. The c3000 enclosure is designed for several markets:

Remote sites or branch offices holding between 3 and 8 servers, and in deployment sites such as retail stores, branch offices, manufacturing sites, and wiring closets. This enclosure is also designed for harsh environments not found in modern datacenters (high ambient temperatures, dusty environments, and in ships, airplanes, platforms, and vehicles).
Small and medium businesses, who own between 3 and 100 servers. The enclosure is designed for use with management devices such as local KVM switches for local administration.
Datacenters with special power and cooling constraints, such as datacenters needing DC powered racks, and/or datacenters with low power & cooling capacities (under 3000 watts per rack).
HPC clusters with InfiniBand interconnection, where the applications need a 1 to 1 IB network subscription ratio between physical nodes in the compute cluster.

HP BladeSystem c-Class infrastructure is made up of several components:

HP ProLiant and/or HP Integrity Server blades for HP-UX, Windows, Linux, and HP Open VMS.
Choice of Intel® or AMD processors, including the latest dual-core & quad-core processors for 32-bit and 64-bit applications.
HP BladeSystem c-Class enclosure (either a c7000 or c3000) that provides connectivity, power, and cooling options. The c-Class enclosure is designed for full redundancy and high availability. A configurable choice of either redundant or non-redundant power, cooling, enclosure management, and interconnect modules are part of the standard enclosure design.
Onboard Administrator module which provides a single point of control for intelligent management of the entire enclosure.
Insight Display powered by the Onboard Administrator provides local management through an LCD display conveniently sited on the front of the system.
Virtual Connect, Ethernet, Fibre Channel, InfiniBand, iSCSI, and other interconnect choices
A power subsystem that provides either redundant or non-redundant power modes and Dynamic Power Saving mode, which uses up to 30% less power than traditional rack-mounted and tower servers AC or DC power supplies are available.
PARSEC (Parallel, Redundant, Scaleable, Enclosure Cooling) architecture: for maximum cooling that consumes less power and reduces datacenter noise.
Direct-attach storage blades, and shared storage blades, which will provide file-based or block-based shared storage capacity for the servers within the enclosure.

HP ProLiant & Integrity Server Blades

Delivering best-in-class performance, choice and reliability with AMD Opteron™, Intel® Xeon™, and Intel® Itanium 2™ processors for Windows, Linux, or HP-UX based servers, the HP portfolio of server blades supports a variety of application requirements for scale-out architectures. HP offers one-, two-, and four-processor (dual-core & quad-core) server blades, including the widest range of performance, and form factors, and the most processing density and performance of any other portfolio. This portfolio of servers is designed for 32-bit and 64-bit applications.
For more information please see:
http://h18000.www1.hp.com/products/quickspecs/north_america/12534.html

HP SB40c Storage Blade

The StorageWorks SB40c is a half-height c-Class storage blade featuring support for up to six hot-plug Small Form Factor (SFF) Serial Attached SCSI (SAS) or Serial ATA (SATA) hard disk drives. The SB40c connects directly to the adjacent server blade to provide up to 876GB additional storage capacity to that blade. For maximum fault tolerance the SB40c uses supports hardware RAID 0, 1, 1+0, 5, and 6 (ADG), using the onboard Smart Array P400 with up to 256MB of battery-backed write cache.
For more information please see:
http://h18000.www1.hp.com/products/quickspecs/12587_na/12587_na.html

HP Ultrium Tape Blades

HP StorageWorks Ultrium Tape Blades provide integrated data protection for HP BladeSystem c-Class enclosures:

SB1760c Tape Blade is LTO-4 Ultrium tape technology with capacity up to 1.6 TB on a single data cartridge (2:1 compression) and performance up to 576 GB/hr (2:1 compression). SB1760c also includes hardware data encryption capability which can help safeguard data on tape cartridges.
SB920c Tape Blade is LTO-3 Ultrium tape technology with capacity up to 800 GB on a single data cartridge (2:1 compression) and performance up to 432 GB/hr (2:1 compression).
448c Tape Blade is LTO-3 Ultrium tape technology with capacity up to 400 GB on a single data cartridge (2:1 compression) and performance up to 173 GB/hr (2:1 compression).

HP StorageWorks Ultrium Tape Blades provide direct attach data protection for the adjacent server and network backup protection for all other data within the enclosure. The HP Ultrium Tape Blades are the industry's first bladed tape drives and are developed exclusively for the BladeSystem c-Class enclosures.

For more information, please visit:
http://h18000.www1.hp.com/products/quickspecs/12729_na/12729_na.html

HP StorageWorks AiO SB600c Storage Blade

The HP AiO SB600c Storage Blade Solution helps customers create HP c-Class BladeSystem business solutions by consolidating file serving (NAS), shared application storage (iSCSI SAN), and data protection under a unified management umbrella to deliver outstanding value and utility. The AIO SB600c Storage Blade Solution consists of the following components; a half-height c-Class server blade, a storage blade with 1.16 TB of raw storage capacity, and HP Management software.
For more information, please visit:
http://www.hp.com/go/aiostorage

HP BladeSystem c-Class c3000 Enclosure

A BladeSystem c3000 enclosure holds up to 8 server and/or storage blades plus redundant or non-redundant network and storage switches. It includes a shared, multi-terabit high-speed mid-plane for wire-once connectivity of server blades to network and shared storage. Power is delivered through a pooled power backplane that ensures the full capacity of the power supplies is available to all blades.

Each c3000 enclosure is built with the following functions:

Up to 8 half-height and/or up to 4 full-height server blades and/or storage blades per enclosure.
Up to 3 different interconnect fabrics (Ethernet, FC, IB, iSCSI, SAS, etc.) supported simultaneously within the enclosure.
A single-phase power subsystem - for flexibility in connecting to datacenter power, or to UPS's or to low-line wall outlets.
Choice of AC or DC power supplies.
PARSEC enclosure design - Parallel, redundant and scalable cooling and airflow design.
Four (4) to Six (6) Active Cool fans
Fully redundant design - no single point of failure; redundant interconnections between servers and interconnect modules; a mid-plane with no active components; redundant cooling using Active Cool fans; all devices are hot-pluggable and customer replaceable.
Best performance per watt - lower wattage per server blade, in comparison to rack-mounted servers
Full AC redundancy - with no power zones.
Single or Dual Onboard Administrator management modules

An Onboard Administrator management module is built in to the enclosure with the following functions:

Robust, multiple enclosure setup and control.
Reports asset and inventory information for the devices in the enclosure.
Reports thermal and power information, including real-time actual power usage per server and per enclosure.
Front-mounted Insight Display for easy management at the deployment site.
Integrated access to all server blade iLOs from a single cable.
Provides integrated access to interconnect bay device management ports from the single Onboard Administrator cable.
Single sign-on capability for all devices in the enclosure
Role-based security locally and/or with LDAP directory services.
Provides a wizard-based initial setup process for easy configuration.
An optional DVD drive for local software deployment, and HP SmartStart deployment
An optional local KVM interface for connection to KVM switches.

A BladeSystem c3000 enclosure provides the following benefits:

With local and remote hardware management integrated across the solution, one full enclosure can be managed as easily as one server.
Scalable: Management and network interconnects extend scalability beyond a single enclosure, allowing resources to be pooled and shared across multiple enclosures.
Investment protection: Accommodates multiple server and network designs in one enclosure.
Lower costs per server, in comparison to rack-mounted servers
Lower power consumption, in comparison to rack-mounted servers.
Service and management: Allows multiple administrators to remotely access and maintain multiple servers & interconnect devices simultaneously.

HP BladeSystem c-Class Interconnect Options

HP also offers one of the broadest selections of interconnect fabric options in the industry to provide network, SAN/network attached storage (NAS), and cluster connectivity.
HP BladeSystem interconnects provide:

New HP Virtual Connect devices, designed to reduce networking costs and simplify network configuration and provisioning.
Seamless integration of Ethernet, FC, InfiniBand, iSCSI, and SAS fabrics: Standard-based switch options include Cisco, Brocade, and HP (BNT) products that integrate within your existing standards.
Built-in redundancy: Rear-mounting interconnect modules designed for redundant interconnections between server blades and switches.
Cable reduction: Interconnect switches provide up to 32-to-1 network cable reductions per server blade enclosure

For more information HP BladeSystem c-Class Interconnect Components, please visit: http://h18000.www1.hp.com/products/quickspecs/12524_na/12524_na.html

Factory Express Portfolio for Servers and Storage

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging and custom packaging. HP products supported through Factory Express include: a wide array of servers and storage: HP Integrity, HP ProLiant & HP ProLiant & Integrity Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express

HP Enterprise Configurator	The HP eConfigure-Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance. http://www.hp.com/products/configurator

HP Insight management software	HP Insight Foundation	Managing the growing number of servers can be complex and expensive for your organization. IT managers need to address changing business needs with tools that meet the challenges of managing today's complex Datacenters. HP provides management solutions that are designed to simplify a server's installation, configuration and maintenance throughout the entire server lifecycle. This provides the customer with higher levels of operational efficiency and highly reliable systems: http://www.hp.com/go/foundation. The foundation pack includes: HP SmartStart HP Management HP ProLiant Firmware Maintenance SmartStart version supported (minimum): SmartStart 7.60. http://www.hp.com/servers/smartstart
	ProLiant Onboard Administrator	HP ProLiant Onboard Administrator (powered by the HP Integrated Lights-Out 2 management processor) simplifies server setup, health monitoring, power and thermal control, and lights-out remote administration of ProLiant ML, DL, and BL servers. HP ProLiant Onboard Administrator functions without additional software, and can be accessed from any location via a web browser. It works hand-in-hand with HP Systems Insight Manager, Insight Control, and the Insight Dynamics for ProLiant helping customers unlock the value of the ProLiant platform and deliver the highest possible quality of IT service to the business. See: www.hp.com/go/ProLiantOA
	HP Insight Control	HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, migrate, monitor, remote control, and optimize your IT infrastructure through a single, simple management console. Two versions of Insight Control are available, to serve environments requiring either a Linux-based or a Windows-based central management server: HP Insight Control for Linux, and HP Insight Control. See www.hp.com/go/insightcontrol HP Insight Control includes one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: http://www.hp.com/services/insight
	HP Insight Dynamics for ProLiant	HP Insight Dynamics for ProLiant, a product option, is an integrated command center that enables IT Staff personnel to continuously analyze and optimize a converged infrastructure, while automating and reducing the cost of common data center tasks by as much as 40 percent. As a powerfully integrated by design toolkit to accelerate complex technology projects and simplify daily operations that ultimately enable IT Staff personnel to dynamically keep pace with the organizations changing business requirements. It enables them to plan capacity and power continuously, balance across physical and virtual resources, and ensure cost-effective high availability. It also enables IT organizations to provision infrastructure consistently and automatically from pools of shared resources using a self-service portal. Resources provisioned can range from a single virtual machine to complex multi-tier environments and their associated physical and virtual resource requirements. In addition to the previous functional benefits, it also provides a cost-effective disaster recovery for physical and virtual environments that works with HP StorageWorks Continuous Access software for both the Enterprise Virtual Array and the XP storage array allowing application environments to be reactivated in minutes with the touch of a button to a remote location. NOTE: For more information, visit: http://www.hp.com/go/insightdynamics

HP BladeSystem Power Sizer

The HP BladeSystem Power Sizer helps in sizing the power infrastructure needed for a HP BladeSystem solution. This sizer enables effective planning for the power consumption and heat load of the BladeSystem at its site.

The sizer enables you to:

Select the type and number of components within each Blade Server and Blade Enclosure.
View the effect of component changes on the power consumption and heat loading.
Review server loading and determine power supply and power subsystem requirements.
Approximate electrical and heat load for facilities planning purposes.

The sizing estimate is based on component level power measurements for a system stressed to maximum capability.

Values obtained from the BladeSystem Sizer tool are measured with all components stressed to 100% load and are intended for facilities planning purposes only. Actual power consumption varies with application type, application utilization, and ambient temperature.

The p-class BladeSystem and the c-Class BladeSystem solutions are supported in the BladeSystem Power Sizer.

Available at: http://www.hp.com/go/bladesystem/powercalculator

Service and Support

HP Care Pack services provide total care and support expertise with committed response designed to meet your IT and business needs.

The HP Care Pack service for HP ProLiant BL c-Class server blades, cover the server blade and all HP branded hardware options qualified for the server, purchased at the same time or afterwards, internal to the server.

HP Care Pack services for the c7000 and c3000 enclosures cover the enclosure, power supplies and fans. HP qualified rack options are covered by these services when installed within the same rack. HP supported c-Class enclosure devices including pass thru, Ethernet interconnect and virtual connect modules are also covered by the c7000 and c3000 enclosure Care Pack services.

NOTE: SAN/Fabric switches for the HP c-Class BladeSystem are not covered under the c7000 and c3000 enclosure Care Packs, SAN/Fabric switches carry separate Care Packs. SAN/Fabric Switch Care Pack service level support should always be uplifted to match existing storage or server service level.

To fully capitalize on your HP BladeSystem servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a HP BadeSystem server support offer to help you speedily deploy and maximize system uptime.

Recommended Service – Simplify ProLiant solution implementation, maintenance and management.

Support Service – 4-Hour Response Coverage, 3-Year, 24 x 7, Same Business Day
Deployment Service – Installation and Start Up for HP BladeSystem Infrastructure

Enhanced Service – Optimize service level to increase IT performance and availability

Support Service – HP Proactive BladeSystem Service, 1-Year
Deployment Service – Enhanced Network Installation and Start-up for HP BladeSystem Switches

Installation & Start-Up service for HP BladeSystem Infrastructure plus HP BladeSystem Enhanced Network Installation and Start-UP as per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excluding HP holidays.

For a complete listing of service offerings and information visit:
http://www.hp.com/services/bladesystemservices
http://h20219.www2.hp.com/services/us/en/always-on/servers-bladesystem.html

Configuration Information Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order server blades must start with a CTO Blade.
NOTE: FIO indicates that this option is a Factory Installable Option.

For a complete configuration of the HP BladeSystem, please do the following:

Step 1: Select desired model, configuration and quantity of HP ProLiant server and Storage blades

NOTE: For server blade information, please visit:
http://h18000.www1.hp.com/products/quickspecs/north_america/12534.html
NOTE: For Storage Blade information, please visit:
http://h18000.www1.hp.com/products/quickspecs/12587_na/12587_na.html

Step 2: Determine quantity of HP BladeSystem c-3000 Enclosures to purchase and choose Required Options (One of the following from each list unless otherwise noted):
NOTE: Each HP BladeSystem c3000 Server Blade Enclosure holds up to 8 half-height blades, or up to 4 full-height server blades. Server blanks will be shipped in all empty bays.
Select Base Server Blade Enclosure Configuration
HP BladeSystem c3000 c-Class Server Blade Enclosures	Choose one of the following CTO enclosures
	HP BladeSystem c3000 CTO Enclosure- Rack NOTE: CTO model includes 2 AC power supplies and 4 Active Cool Fans, a DVD drive, rack rails, and a single DDR2 Onboard Administrator module.	508668-B21
	HP BladeSystem c3000 CTO Enclosure - Tower NOTE: CTO model includes 4 Active Cool Fans; order an Onboard Administrator, DVD drive, power supplies and fans in the next steps.	458034-B21

Select Required Options (Choose one of the following from each category unless otherwise noted)
Onboard Administrator for Tower model	HP c3000 Tower Onboard Administrator Module , FIO NOTE: This module is required for 458034-B21 NOTE: Supports c3000 Tower CTO model only (458034-B21) NOTE: If ordering the c3000 rack CTO model (508668-B21), this OA module is not needed, since the new DDR2 OA module is included in the c3000 rack CTO enclosure (508668-B21). See above description.	461514-B21

Step 2A: Select additional optional enclosure options:
Redundant Onboard Administrator	HP c3000 Dual Onboard Administrator Module NOTE: Second Onboard Administrator Module for the DDR2 OA module included in P/N 508668-B21. NOTE: An optional part for the c3000 Rack CTO model only (P/N 508668-B21) NOTE: A Dual Onboard Administrator module will be available for c3000 Tower models later in 2009.	488100-B21
Additional c3000 Power Supplies (Choose AC or DC power supplies)	HP 1200W High Efficiency AC Common Slot Power Supply NOTE: Meets Climate Savers Computing Initiative, 2007-2008 NOTE: AC power supplies include a C13 to C14 PDU power cord.	437572-B21
	HP 1200W -48V DC Common Slot Power Supply NOTE: DC power supplies contain a -48V DC power cord designed for in rack DC power rectifiers.	437573-B21
	NOTE: Order additional power supplies for either rack or Tower models, as determined by the use of the HP BladeSystem Power Calculator. NOTE: For a full enclosure, order 4 power supplies in a Power Supply Redundant (N+1) configuration; order 6 power supplies in an AC Redundant (N+N) configuration. NOTE: Order 6 power supplies for AC or DC Redundant (N+N) configuration. NOTE: Each enclosure must include only 1 type of power supplies. All AC or all DC power supplies.
c-Class Active Cool Fan	HP BladeSystem Active Cool 100 Fan	507082-B21
	NOTE: These fan modules are for the HP BladeSystem c3000 CTO Enclosure- Rack (508668-B21) only.
	HP BL c-Class Active Cool 200 Fan NOTE: These fans are for HP BladeSystem c3000 CTO Enclosure - Tower(458034-B21) only. NOTE: For a full enclosure, order 2 additional (6 total) Active Cool Fans.	412140-B21
HP c3000 Enclosure DVD Drive	HP c3000 Enclosure DVD Drive NOTE: this option is already included in HP BladeSystem c3000 CTO Enclosure- Rack (508668-B21). Order this option, if desired, for c3000 Tower CTO enclosure (458034-B21)	437577-B21
HP c3000 KVM Modules and Adapters	HP c3000 KVM module NOTE: For use with in-rack KVM switches.	437575-B21
HP c3000 KVM Modules and Adapters	KVM Adapter for KVM switches with internal media drives NOTE: Order one KVM Adapter per c3000 enclosure, to support KVM switches accepting RJ45 cables (P/N's AF600A, AF601A, or AF602A). Please see Options section of this QuickSpecs for additional product information.	AF603A
Other Enclosure Options	HP BLc3000 Tower Security Option NOTE: Includes front and back locking security panels, and a dust filter which can be installed in the front panel when needed.	461718-B21
Other Enclosure Options	HP BLc3000 Tower Replacement Dust Filter NOTE: Includes 2 sets of dust filters.	500184-B21
HP Insight Control for BladeSystem Licenses	HP Insight Control, 8-Server Factory-Integration License Option for BladeSystem enclosure, including 1 year of 24x7 Technical Support and Updates NOTE: This license supports HP ProLiant c-Class blade servers. NOTE: Must be purchased as an option to an HP BladeSystem enclosure. FIO can only be ordered as part of a factory-configured platform. Customer will receive a printed license entitlement certificate via physical shipment.	439034-B23
HP Insight Control for BladeSystem Licenses	HP Insight Control, 16-Server Factory-Integration License Option for BladeSystem enclosure, including 1 year of 24x7 Technical Support and Updates NOTE: This license supports HP ProLiant c-Class blade servers. NOTE: Must be purchased as an option to an HP BladeSystem enclosure. FIO can only be ordered as part of a factory-configured platform. Customer will receive a printed license entitlement certificate via physical shipment.	417688-B23
Optional Power Cords	Power Cord, C20 C13, 15A, Universal Jumper, 2m NOTE: For use with PDU's accepting C20 power cords. NOTE: Order 1 for each power supply.	AF590A

Step 3: Select additional (one to four) interconnects.
NOTE: Interconnect Bay 1 must contain one of the "Ethernet" interconnect modules For additional information on Interconnect Options, please visit: HP BladeSystem c-Class Interconnect QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12524_na/12524_na.html
HP BladeSystem c-Class Ethernet Interconnects	HP Virtual Connect Flex-10 10Gb Ethernet Module for the c-Class BladeSystem	455880-B21
	HP 1/10Gb-F Virtual Connect Ethernet Module for c-Class BladeSystem	447047-B21
	HP BladeSystem c-Class Virtual Connect 1Gb SX SFP	453151-B21
	HP BladeSystem c-Class Virtual Connect 1Gb RJ-45 SFP Opt Kit	453154-B21
	HP 1Gb Virtual Connect Ethernet Module for c-Class BladeSystem NOTE: This module must be upgraded to VC Management firmware v1.20 or greater.	399593-B22
	HP ProCurve 6120G/XG Blade Switch	498358-B21
	HP ProCurve 6120XG Blade Switch	516733-B21
	Ethernet Pass-Through Module for HP BladeSystem	406740-B21
	HP 10GbE Pass-Thru Module	538113-B21
	Cisco Catalyst Blade Switch 3120X for HP	451439-B21
	Cisco Catalyst Blade Switch 3120G for HP	451438-B21
	Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem	410916-B21
	GbE2c Layer 2/3 Ethernet Blade Switch for HP c-Class BladeSystem	438030-B21
	HP GbE2c Layer 2/3 Ethernet Blade Switch Advanced Functionality Software NOTE: Provides additional feature functionality such as Hot Links, PVLAN Edge and IGMPv3 Snooping. Purchase of this SW entitles users to three years of additional software upgrades as made available. This option may be purchased at any time.	485192-B21
	HP 1:10 Gb Ethernet BL-c Switch	438031-B21
	HP 1:10 GbE BLc Advanced Functionality Software NOTE: Provides additional feature functionality such as Hot Links, PVLAN Edge and IGMPv3 Snooping. Purchase of this SW entitles users to three years of additional software upgrades as made available. This option may be purchased at any time.	485193-B21
	HP 10Gb Ethernet BL-c Switch NOTE: The purchase the HP 10Gb Ethernet BL-c Switch, also requires the purchase HP 10GbE Dual Port Mezzanine Adapter for HP BladeSystem c-Class (P/N 516936-B21) per server blade that requires 10Gbit support. NOTE: The HP BladeSystem c-Class Network Interconnects ship as single units. The above interconnects must be ordered in quantities of two for redundant configurations.	445860-B21
	HP 10GbE Dual Port Mezzanine Adapter for HP BladeSystem c-Class	516936-B21
	HP 10GbE BLc Advanced Functionality Software NOTE: Provides additional feature functionality such as Hot Links, PVLAN Edge and IGMPv3 Snooping. Purchase of this SW entitles users to three years of additional software upgrades as made available. This option may be purchased at any time.	485194-B21
HP BladeSystem c-Class FC SAN Interconnects	HP 4Gb Virtual Connect Fibre Channel Module for c-Class BladeSystem	409513-B21
	HP Virtual Connect 8Gb 24-Port Fibre Channel Module for c-Class BladeSystem	466482-B21
	HP Virtual Connect 8Gb 20-Port Fibre Channel Module for c-Class BladeSystem	572018-B21
	16 port FC Pass-thru Module for c-Class BladeSystem	403626-B21
	HP 8/12c SAN Switch c-Class BladeSystem	AJ820A
	HP 8/24c SAN Switch c-Class BladeSystem	AJ821A
	HP 8/24c SAN Switch Power Pack c-Class Enclosure	AJ822A
	HP 8/12c Switch 12-pt c-Class Upgrade LTU	T5517A
	HP Brocade 4/12 SAN Switch	AE370A
	HP Brocade 4/24 SAN Switch Power Pack	AE371A
	HP Brocade 4/24 SAN Switch	AE372A
	HP Brocade 4/12 SAN Switch Upgrade LTU	AE373A
	Cisco MDS 9124e 12 port Fabric Switch	AG641A
HP BladeSystem InfiniBand Interconnect	HP BLc 4X DDR IB Gen2 Switch for HP BladeSystem c-Class	489183-B21

Step 4: Select rack power distribution for installing the enclosure into a rack.
NOTE: For use with the c3000 rack-able model only. NOTE: A pair of PDUs must be ordered for AC Feed redundancy. If AC redundancy is not required, a single PDU or UPS may be acceptable.
HP Monitored Power Distribution Unit	HP 8.6 kVA Monitored PDU, 30A	AF504A
HP Modular Power Distribution Unit	HP 8.3kVA Modular Distribution Unit 40 Amp	252663-D73
	HP 4.9kVA Modular Distribution Unit 24 Amp	252663-D72
	HP Two C-13 PDU Extension Bars	AF500A
Uninterruptible Power Systems - Rack	HP rack-mountable R5500 UPS (5000VA / 4500 watts) NOTE: The R5500 includes four c-13 PDU Extension bars. NOTE: The R5500 supports 4 power supplies in the Power Supply Redundant (N+1) power mode	AF426A
Uninterruptible Power Systems - Rack	HP Rack to Tower 5500 Conversion Kit	AF442A

Step 5: Select Wall Outlet Power Cords (For connection to standard wall outlets)
NOTE: Select one wall outlet power cord for each power supply when plugging the power supplies into a wall outlet. NOTE: Wall Outlet power cords should only be used with low-line (100v to 110V) power sources. If high-line power outlets are required, safety regulations require the use of a PDU or a UPS between the c3000 enclosures power supplies and wall outlets. NOTE: A standard PDU power cord(c13 to C14) is included with each AC power supply, so these wall outlet power cords are not required if you plan to plug the power supplies into a PDU or UPS.
Wall Outlet Power Cords	Nema 5-15P to IEC320-C13, low voltage (6 ft/2 m) NOTE: HP Power cord (6 ft) 1.83 meter 10A C-13-UL domestic power cord, for grounded USA 110V wall outlets.	AF556A
	Power Cord, C20 C13, 15A, Universal Jumper, 2m NOTE: For use with PDUs accepting C20 power cords.	AF590A

Related Options

c3000 Enclosure Options	HP c-Class Replacement Enclosure Miscellaneous Blanks kit	412148-B21
	NOTE: Contains 1 each of Power Supply Blank, Interconnect Module Blank, Local KVM option blank, DVD Blank, Active Cool Fan Blank, and c3000 minidivider) NOTE: This kit should only be ordered to replace lost or damaged blanks.
	HP c-Class Replacement Server Blank and Coupler Option Kit (contains 1 x half-height server blank with coupler) NOTE: The coupler allows half-height server blanks to be coupled together to create a full-height server blank. NOTE: This kit should only be ordered to replace lost or damaged blanks.	412150-B21

c3000 Rack Brackets	HP c3000 Rack Shipping Bracket Kit NOTE: Required when shipping a c3000 enclosure in a HP 10000 series rack. Please order 1 kit per enclosure.	461384-B21

Onboard Administrator	HP c3000 DDR2 Onboard Administrator NOTE: For a rack-based c3000. NOTE: This Onboard Administrator module supports either single mode, or dual/redundant mode Onboard Administrators in a c3000 rack model.	488099-B21
	HP c3000 Dual Onboard Administrator Module NOTE: Second Onboard Administrator Module for the DDR2 OA module. NOTE: Support for second Order Administrator Module for c3000 Enclosure. NOTE: This module fits into an HP c3000 DDR2 Onboard Administrator (p/n 488099-B21).	488100-B21

c-Class Power Supply	HP 1200W High Efficiency AC Common Slot Power Supply NOTE: Meets Climate Savers Computing Initiative, 2007-2008. NOTE: AC power supplies include a C13 to C14 PDU power cord.	437572-B21
	HP 1200W-48V DC Common Slot Power Supply NOTE: DC power supplies contain a -48V DC power cord designed for in rack DC power rectifiers.	437573-B21
	NOTE: For c-3000 Low-line Power Cords, please order the appropriate power cord for your countries standard electrical outlets. Please see Step 5 above for power cord part numbers.

c-Class Active Cool Fans	HP BladeSystem Active Cool 100 Fan	507082-B21
	HP c-Class Active Cool 200 Fan NOTE: For a full enclosure, order 2 additional (6 total) Active Cool Fans. NOTE: Supports the c7000 and c3000 enclosures.	412140-B21

HP BLc3000 Enclosure DVD Drive	HP c3000 Enclosure DVD Drive	437577-B21

HP c3000 KVM Module and Adapters	HP c3000 KVM Module NOTE: For use with in-rack KVM switches	437575-B21
	KVM Adapter for KVM switches with internal media drives NOTE: Order one KVM Adapter per c3000 enclosure, to support KVM switches accepting RJ45 cables (P/N's AF600A, AF601A, or AF602A). Please see Options section of this QuickSpecs for additional product information.	AF603A

Other c3000 enclosure options	HP BLc3000 Tower Security Option	461718-B21
	HP BLc3000 Tower Replacement Dust Filter NOTE: Includes 2 sets of dust filters.	500184-B21
	HP BLc3000 Rack Rails NOTE: For use with the c3000 rack models.	437576-B21

HP BladeSystem c-Class Ethernet Interconnects	HP Virtual Connect Flex-10 10Gb Ethernet Module for the c-Class BladeSystem	455880-B21
	HP 1/10Gb-F Virtual Connect Ethernet Module for c-Class BladeSystem	447047-B21
	HP 1Gb Virtual Connect Ethernet Module for c-Class BladeSystem NOTE: This module must be upgraded to VC Management firmware v1.20 or greater.	399593-B22
	HP ProCurve 6120G/XG Blade Switch	498358-B21
	HP ProCurve 6120XG Blade Switch	516733-B21
	Ethernet Pass-Through Module for HP BladeSystem NOTE: The Ethernet Pass-Thru Module is shipped as a single unit and should be ordered in quantities of two.	406740-B21
	HP BladeSystem c-Class Virtual Connect 1Gb SX SFP	453151-B21
	HP BladeSystem c-Class Virtual Connect 1Gb RJ-45 SFP Option Kit	453154-B21
	Cisco Catalyst Blade Switch 3120X for HP	451439-B21
	Cisco Catalyst Blade Switch 3120G for HP	451438-B21
	Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem	410916-B21
	HP GbE2c Layer 2/3 Ethernet Blade Switch	438030-B21
	HP 1:10Gb Ethernet BL-c switch	438031-B21

HP BladeSystem c-Class FC SAN Interconnects	HP 4Gb Virtual Connect Fibre Channel Module for c-Class BladeSystem	409513-B22
	HP Virtual Connect 8Gb 24-Port Fibre Channel Module for c-Class BladeSystem	466482-B21
	HP Virtual Connect 8Gb 20-Port Fibre Channel Module for c-Class BladeSystem	572018-B21
	16 port FC Pass-through Module for c-Class BladeSystem	403626-B21
	HP 8/12c SAN Switch c-Class BladeSystem	AJ820A
	HP 8/24c SAN Switch c-Class BladeSystem	AJ821A
	HP 8/24c SAN Switch Power Pack c-Class Enclosure	AJ822A
	HP 8/12c Switch 12-pt c-Class Upgrade LTU	T5517A
	HP Brocade 4/12 SAN Switch	AE370A
	HP Brocade 4/24 SAN Switch Power Pack	AE371A
	HP Brocade 4/24 SAN Switch	AE372A
	HP Brocade 4/12 SAN Switch Upgrade LTU	AE373A

Cisco MDS 9124e Fabric Switch for HP c-Class BladeSystem	Cisco MDS 9124e 12-port Fabric Switch	AG641A
	Cisco MDS 9124e 24-port Fabric Switch	AG642A
	Cisco MDS 9124e 12-port Upgrade LTU	T5169A

HP BladeSystem InfiniBand Interconnect	HP BLc 4X DDR IB Gen2 Switch for HP BladeSystem c-Class	489183-B21

HP Insight Software	HP Insight Control
	HP Insight Control, 8-Server Electronic License for bundling with BladeSystem enclosure, including 1 year of 24x7 Technical Support and Updates	TC276AAE
	HP Insight Control, 16-Server Electronic License for bundling with BladeSystem enclosure, including 1 year of 24x7 Technical Support and Updates	TC277AAE
	HP Insight Control, Single-Server License including 1 year of 24x7 Technical Support and Updates	452148-B22
	HP Insight Software Media Kit NOTE: Insight Software DVD media without licenses. Contains HP Systems Insight Manager, HP Insight Control, HP Insight Dynamics, HP Insight Control for Microsoft System Center, and Virtual Connect Enterprise Manager software. Uses an integrated installer to perform quick and accurate software installation and updates.	436222-B21
	NOTE: Licenses ship without media. The Insight Control Media Kit can be ordered separately, or can be downloaded at: http://www.hp.com/go/insightupdates. NOTE: The "for bundling with an enclosure" license kits can only be ordered together with a BladeSystem c3000 or c7000 enclosure on the same order. NOTE: Electronic licenses can be used to purchase multiple licenses with a single activation key, and is available in all countries except China and Japan. Customers in China and Japan should order the physical equivalent. NOTE: Customer will receive a license entitlement certificate, which must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support Service. NOTE: For additional License Kits, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12631_na/12631_na.html

HP Virtual Connect Enterprise Manager	HP Virtual Connect Enterprise Manager for BL-c3000, No Media, 1-Enclosure License including 1 year of 24x7 Technical Support and Updates. NOTE: This license allows 1 BL-c3000 enclosure to be managed with VCEM. Customer will receive a printed license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online or via fax to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support and Update Service.	459867-B21
	NOTE: For additional License Kits, please visit: http://h18000.www1.hp.com/products/quickspecs/12860_na/12860_na.html

HP c-Class Storage Blades	HP StorageWorks SB40c storage blade	411243-B21
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information at: http://h18000.www1.hp.com/products/quickspecs/12587_na/12587_na.html
	HP PCI Express Mezzanine pass-thru card for HP BladeSystem	431643-B21
	NOTE: The mezzanine card is needed to support the SB40c storage blade (P/N 411243-B21) with HP c-Class BladeSystem full-height server blades.

HP Ultrium Tape Blades	HP StorageWorks SB1760c Tape Blade NOTE: LTO-4 Ultrium tape technology	AQ697A
	HP StorageWorks SB920c Tape Blade NOTE: LTO-3 Ultrium tape technology	AJ401A
	HP StorageWorks Ultrium 448c Tape Blade NOTE: LTO-2 Ultrium tape technology	440947-B21
	HP PCI Express Mezzanine pass-thru card for HP BladeSystem	431643-B21
	NOTE: The HP PCI Express Mezzanine Pass-Thru Card for HP BladeSystem (431643-B21) is required when installing a tape blade adjacent to a full-height server blade
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information at: http://h18000.www1.hp.com/products/quickspecs/12729_na/12729_na.html

HP PCI Expansion Blade	PCI Expansion Blade	448018-B21
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information at: http://h18000.www1.hp.com/products/quickspecs/12753_na/12753_na.html

HP StorageWorks AIO SB600c shared storage blade	HP StorageWorks AiO SB600c Storage Blade – 1.16TB NOTE: Shared storage blade for server blades within the enclosure. The SB600c can be either NAS (file-based shared storage or iSCSI Shared Storage connected to server blades within the enclosure using an Ethernet switch in the enclosures interconnect bays. NOTE: Please see the QuickSpecs for Technical Specifications and additional information at: http://h18000.www1.hp.com/products/quickspecs/12786_na/12786_na.html	AG780A
	HP StorageWorks Storage Mirroring for AiO Edition Software NOTE: This optional software is for mirroring data between AiO Storage blades in different locations. This is host-based data replication software for disaster recovery and data protection. NOTE: Order 1 unit for each AiO SB600c Storage Blade.	T5321A

Power Distribution Units	Monitored PDU
	HP 8.6 kVA S1324 Monitored PDU- single input, 3Ø, 24A	AF504A
	Modular PDUs
	HP 8.3kVA Modular Distribution Unit 40 Amp	252663-D73
	HP 4.9kVA Modular Distribution Unit 24 Amp	252663-D72
	HP Two C-13 PDU Extension Bars	AF500A
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/pdu

Optional Power Cords	Power Cord, C20 C13, 15A, Universal Jumper, 2m NOTE: For use with PDU's that accept C20 power cords.	AF590A

Uninterruptible Power Systems - Rack Mountable	HP rack-mountable R5500 UPS (5000VA / 4500 watts)	AF426A
	NOTE: The R5500 includes four c-13 PDU Extension bars. NOTE: The R5500 supports 4 power supplies in the Power Supply Redundant (N+1) power mode.

HP Rack Series (Graphite Metallic)	HP Rack 10000 Series
HP Rack Series (Graphite Metallic)	HP S10614 (14U) Rack Cabinet – Shock Pallet	292302-B22

	HP Rack 10000 G2 Series
	10622 G2 (22U) Rack Cabinet Shock	AF022A
	10622 G2 (22U) Rack Cabinet Pallet	AF021A
	10642 G2 (42U) Rack Cabinet – Pallet	AF001A
	10642 G2 (42U) Rack Cabinet 1200mm Deep - Shock Pallet	AF034A
	10642 G2 (42U) Rack Cabinet 1200mm Deep - Pallet	AF038A
	10642 G2 (42U) Rack Cabinet – Shock Pallet	AF002A
	10642 G2 (42U) Rack Cabinet – Crated	AF003A
	10642 G2 (42U) Rack Shock Pallet – for field racking	AF007A
	10636 G2 (36U) Rack Cabinet – Shock Pallet	AF011A
	10636 G2 (36U) Rack Cabinet – Crated	AF012A
	10636 G2 (36U) Rack Cabinet, with Extension – Shock Pallet	AF013A
	10636 G2 (36U) Rack Cabinet, without door – Shock Pallet	AF014A
	10647 G2 (47U) Rack Cabinet 1200mm Deep - Shock Pallet	AF044A
	10647 G2 (47U) Rack Cabinet 1200mm Deep - Pallet	AF045A
	10647 G2 (47U) Rack Cabinet – Pallet	AF031A
	10842 G2 (42U) Rack Cabinet Shock	AF042A
	10842 G2 (42U) Rack Cabinet Pallet	AF041A
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information at: http://h18000.www1.hp.com/products/quickspecs/12402_na/12402_na.html NOTE: For additional information regarding Rack Cabinets, please see the following URL: http://www.hp.com/go/rackandpower.

HP Rack Options	Keyboards and Monitors
	TFT7600 Rackmount Keyboard Monitor	AG052A
	1U Rackmount Keyboard with USB	AG072A
	NOTE: For additional information regarding Rack Options, please see the following URL: http://www.hp.com/go/rackandpower

	HP Serial Console Server Options
	HP 16 Port Serial Console Server	AF101A
	HP 48 Port Serial Console Server	AF102A
	Serial Adapter, RJ45-DB9 DCE Female, 1 Pack	AF103A
	Serial Adapter, RJ45-DB9 DCE Female, 8 Pack	AF110A
	NOTE: Cat5e cables are required to connect Serial Adapters to Serial Console Servers. Additional Serial Adapters and Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm. NOTE: For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.

	HP KVM Switch Options
	2x1x16 IP Console Switch with Virtual Media	AF601A
	4x1x16 IP Console Switch with Virtual Media	AF602A
	2x16 Server Console Switch with Virtual Media	AF600A
	BladeSystem c-Class KVM Interface Adapter - 1 pack	AF605A
	HP 2x8 Server Console Switch G2	AF616A
	HP 2x16 Server Console Switch G2	AF617A
	NOTE: Cat5e cables are required to connect Interface Adapters to Consoles Switches. Cat52 cables can be found at the following URL: http://www.hp.com/go/kvm
	HP 1x4 Console Switch	AF611A
	HP USB Server Console Cable, 6 foot, 2-Pack NOTE: required for supporting USB peripherals.	AF613A
	HP USB KVM Cable with audio, 6'-2-pack	371729-B21
	NOTE For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: http://www.hp.com/go/kvm

	Rack Options
	HP 10642 G2 Front Door ALL	AF009A
	HP 10636 G2 Front Door ALL	AF019A
	10642 G2 (42U) Side Panels (set of two) (Graphite Metallic)	AF054A
	10636 G2 (36U) Side Panels (set of two) (Graphite Metallic)	AF056A
	10636 G2 Rear Extension Kit	AF060A
	600mm G2 Stabilizer Option Kit (Graphite)	AF062A
	800mm G2, Heavy Duty Stabilizer Option Kit (Graphite) NOTE: Supports 10000 G2 Series only.	AF068A
	HP 10000 G2 Rack Grounding Kit	AF074A
	600W 10K G2 Rack Tie Down	AF076A
	NOTE: For additional information regarding Rack Options, please see the following URL: http://www.hp.com/go/rackandpower.

Tape Storage	NOTE: Fibre channel tape libraries/D2D/VLS devices connect to blade enclosures via a Fibre switch in the switch bay. SAS tape libraries connect to blade enclosures via a SAS switch in the switch bay or a server blade via a SAS HBA inside the PCI Expansion Blade. iSCSI D2D systems connect to blade enclosures via an Ethernet switch in the switch bay. Please visit: http://www.hp.com/go/ebs for complete compatibility details.
	HP StorageWorks 1/8 G2 Tape Autoloaders
	HP StorageWorks 1/8 G2 LTO-4 Ultrium 1760 SAS Tape Autoloader	AK377A
	HP StorageWorks 1/8 G2 LTO-3 Ultrium 920 SAS Autoloader	AH558A
	HP StorageWorks MSL2024 Tape Library
	HP StorageWorks MSL2024 1 LTO-4 Ultrium 1840 4GB FC Library	AJ036A
	HP StorageWorks MSL2024 1 LTO-4 Ultrium 1760 SAS Drive Library	AK378A
	HP StorageWorks MSL2024 1 LTO-3 Ultrium 960 4GB FC Library	AG326B
	HP StorageWorks MSL2024 1 LTO-3 Ultrium 920 SAS Drive Library	AH559A
	HP StorageWorks MSL4048 Tape Library
	HP StorageWorks MSL4048 1 LTO-4 Ultrium 1840 4GB FC Library	AJ036A
	HP StorageWorks MSL4048 2 LTO-4 Ultrium 1760 SAS Drive Library	AK380A
	HP StorageWorks MSL4048 2 LTO-3 Ultrium 960 4GB FC Library	AG325B
	HP StorageWorks MSL4048 1 LTO-3 Ultrium 920 SAS Drive Library	AH560A
	HP StorageWorks MSL8096 Tape Library
	HP StorageWorks MSL8096 2 LTO-4 Ultrium 1840 4GB FC Library	AJ040A
	HP StorageWorks MSL8096 2 LTO-4 Ultrium 1760 SAS Drive Library	AK382A
	HP StorageWorks MSL8096 2 LTO-3 Ultrium 960 4GB FC Library	AH218A
	HP StorageWorks MSL8096 2 LTO-3 Ultrium 920 SAS Drive Library	AH561A
	NOTE: Please reference the QuickSpecs at: http://www.hp.com/go/automation for additional information needed to create a complete solution; reference current compatibility information at: http://www.hp.com/go/ebs.
	HP StorageWorks Virtual Library Systems
	HP StorageWorks 12000 Virtual Library System Gateway Base Library	AH814B
	HP StorageWorks 9030 Virtual Library System	AG306A
	HP StorageWorks 6218 Virtual Library System	AH809B
	HP StorageWorks 6227 Virtual Library System	AH810B
	HP StorageWorks 6636 Virtual Library System	AH811B
	HP StorageWorks 6653 Virtual Library System	AH812B
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information at: http://www.hp.com/go/automation needed to create a complete solution. Reference current compatibility information at: http://www.hp.com/go/ebs.

Disk-Based Backup	D2D Backup
	HP StorageWorks D2D2504i Backup System	EJ002A
	HP StorageWorks D2D2503i Backup System NOTE: 3TB of Disk Storage	EH945A
	HP StorageWorks D2D4004i Backup System NOTE: 4.5TB of Disk Storage	EH938A
	HP StorageWorks D2D4004fc Backup System NOTE: 4.5TB of Disk Storage	EH941A
	HP StorageWorks D2D4009i Backup System NOTE: 9TB of Disk Storage	EH939A
	HP StorageWorks D2D4009fc Backup System NOTE: 9TB of Disk Storage	EH942A
	HP StorageWorks D2D4112 Backup System NOTE: 12TB of Disk Storage	EH993A
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information at: http://www.hp.com/go/d2d.

Service and Support Offerings (HP Care Pack Services)	NOTE: HP Care Pack services for the c3000 Enclosure cover the enclosure, power supplies and fans. HP qualified rack options are covered by these services when installed within the same rack. HP supported c-Class enclosure devices including pass thru, Ethernet interconnect and virtual connect modules are also covered by the c3000 enclosure Care Pack services. NOTE: SAN/Fabric switches for the HP c-Class BladeSystem are not covered under the c3000 enclosure Care Packs, SAN/Fabric switches carry separate Care Packs. SAN/Fabric Switch Care Pack service level support should always be uplifted to match existing storage or server service level.
	Hardware Services On-site Service
	Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic NOTE: Uplifts the Ethernet devices to the same level of warranty as the c-class enclosure.	UH309E
	4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic	UH310E
	4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic	UH311E
	6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic	UH312E
	Support Plus 24
	Onsite HW support 24x7, 4-Hour response and Insight Control suite for BladeSystem Software Updates and Software Technical support offsite, onsite at HP's discretion, 24x7 2-Hour response time including. HP holidays, Electronic	UF540E
	Installation & Start-up Services
	HP BladeSystem c3000 + ICE + OS Installation and Startup Service for Blade Hardware and Insight Control Software, Electronic	UF817E
	HP BladeSystem c3000 Installation & Startup for Blade Hardware and Operating System	UF818E
	HP BladeSystem c3000 Enhanced Network Installation and Startup Service, Electronic	UF814E
	ProLiant BL c-Class Enclosure and Blade Hardware Installation, Electronic	UE494E
	ProLiant BL c-Class Blade Server Hardware Installation, Electronic	UE493E
	NOTE: For more information, customer/resellers can contact: http://www.hp.com/services/bladesystemservices
	NOTE: The HP Care Pack service part numbers below covers the HP Brocade 4Gb, 12 Port SAN Switch and Brocade 4/24 SAN Switch.
	Hardware Services On-site Service
	Next Business Day On-site Service, 5-Day x 9-Hour Coverage,3 Years, Electronic	UE436E
	4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic	UE437E
	4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, (24 port) Electronic	UE438E
	6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic	UE439E
	Hardware Installation, Electronic	U5988E
	NOTE: The HP Care Pack service part numbers below covers the Brocade 4/24 SAN Switch Power Pack.
	Hardware Services On-site Service
	Support Plus
	Onsite Hardware support, 8am-9pm, M-F, 4-hour response and Software Technical support offsite, onsite at HP's discretion, 8am-9pm, M-F 2-hour response time excluding HP holidays, Electronic	UE728E
	Support Plus 24
	Onsite Hardware support, 8am-9pm, M-F, 4-Hour response and Software Technical support offsite, onsite at HP's discretion, 8am-9pm, M-F 2-Hour response time excluding. HP holidays, Electronic	UE729E
	NOTE: The HP Care Pack service part numbers below covers the HP Cisco MDS 9124e 12 port and 24 port Fabric Switch.
	Hardware Services On-site Service
	Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic	UF313E
	4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic	UF972E
	4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic	UF973E
	6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic	UF974E
	Hardware Installation, Electronic	U5988E
	Software Installation and StartUp Services
	Provides for the Installation and Start-up of HP Insight Rapid Deployment software, Electronic	U5683E
	NOTE: Provides installation on a Customer supplied server designated as a Deployment Server. Includes the deployment of a single server. This new server will be deployed using either one of the pre-configured scripts or an image. In addition, the service will provide for the capture and storage of the configuration of the newly deployed server and orientation on product usage. To be delivered during standard office ours, standard office days.
	Provides for the Installation and Start-up of HP Insight Rapid Deployment software Implementation of HP Insight Rapid Deployment software (Basic), Electronic	UA042E
	NOTE: Service coverage: onsite installation of the Vulnerability and Patch Management (VPM) software on a customer designated server, configuration of the VPM software to acquire security patches, enabling the VPM software to scan up to five (5) systems, applying the security patches to the designated servers, generating a report from VPM that shows the vulnerability assessment results, and providing customer with an orientation to the software.
	Provides for the Installation and Start-up of System Insight Manager (Electronic)	UA041E
	Provides for the Installation and Start-up of System Insight Manager Agents (Electronic)	UA040E
	Provides for the Installation and Startup of Insight Control – Linux Edition	UF369E
	Provides for the Installation and Startup of HP Virtual Machine Manager software for ProLiant & HP Insight Server Migration Manager for ProLiant	UD546E
	Software Operating Environment Care Packs
	1 Year Microsoft operating environment software support 24x7 – 10 incidents	U9269E
	1 Year Red Hat operating System software support 24x7 – 10 incidents	U3408E
	1 Year SuSE operating System software support 24x7 – 10 incidents	U9936E
	1 Year 9x5 ProLiant Essentials Software Support	UF512E
	1 Year 24x7 ProLiant Essentials Software Support	UF513E
	3 Year 9x5 ProLiant Essentials Software Support	UF514E
	HP 3 Year 24x7 ProLiant Essentials Software Support	UF515E
	NOTE: For more information, customer/resellers can contact: ttp://www.hp.com/hps/carepack/services/
	NOTE: HP Care Pack services for the c3000 Enclosure cover the enclosure, power supplies and fans. HP qualified rack options are covered by these services when installed within the same rack. HP supported c-Class enclosure devices including pass thru, Ethernet interconnect and virtual connect modules are also covered by the c7000 enclosure Care Pack services.
	NOTE: SAN/Fabric switches for the HP c-Class BladeSystem are not covered under the c7000 enclosure Care Packs, SAN/Fabric switches carry separate Care Packs. SAN/Fabric Switch Care Pack service level support should always be uplifted to match existing storage or server service level.
	Hardware Services On-site Service
	Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic NOTE: Uplifts the Ethernet devices to the same level of service as the c-class enclosure	HA101A3#6X4
	4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic	HA103A3#6X4
	4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic	HA104A3#6X4
	6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic	HA105A3#6X4
	Support Plus
	Onsite HW support, 8am-9pm, M-F, 4hr response and SW Tech support offsite, onsite at HP's discretion, 8am-9pm, M-F 2hr response time excl. HP holidays, 3 Years	HA109A3#6X4
	Support Plus 24 - Onsite HW support 24x7, 4hr response and SW support offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays, 3 Year	HA110A3#6X4
	Proactive 24 Service - Mission Critical proactive environment 24x7 4hr onsite HW support, 3 Years	HA111A3#6X4
Critical Service - Mission Critical proactive environment 6-Hour Call-to-Repair onsite HW support, 3 Years	HA112A3#6X4
Installation & Start-up Services
HP BladeSystem c3000 Hard Ware Installation	HA113A1#57A
HP BladeSystem c3000 Infrastructure Installation and Startup Service for Blade Hardware and Insight Control Software NOTE: For more information, customer/resellers can contact: http://www.hp.com/services/bladesystemservices	HA114A1#57A
NOTE: The HP Care Pack service part numbers below covers the HP Brocade 4Gb, 12 Port SAN Switch and Brocade 4/24 SAN Switch.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years	HA101A3#85J
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years	HA103A3#85J
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years	HA104A3#85J
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic	HA105A3#85J
Hardware Installation, Electronic	HA113A1#5D2
NOTE: The HP Care Pack service part numbers below covers the Brocade 4/24 SAN Switch Power Pack.
Hardware Services On-site Service
Support Plus
Onsite HW support, 8am-9pm, M-F, 4hr response and SW Tech support offsite, onsite at HP's discretion, 8am-9pm, M-F 2hr response time excluding HP holidays, Electronic	HA109A3#85K
Support Plus 24
Onsite HW support 24x7, 4hr response and SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response time including HP holidays, Electronic	HA110A3#85K
NOTE: The HP Care Pack service part numbers below covers the HP Cisco MDS 9124e 12 port and 24 port Fabric Switch.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years	HA101A3#87L
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years	HA103A3#87L
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years	HA104A3#87L
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic	HA105A3#87L
Hardware Installation, Electronic	HA113A1#5D2
NOTE: For more information, customer/resellers can contact: http://www.hp.com/hps/carepack/services/

Technical Specifications

Server Blade, Power Supply and Fan Population Guidelines

Fan & power supply bay numbering

HP BladeSystem c3000 Enclosure – Rack	HP BladeSystem c3000 Enclosure – Tower
Fan bay numbering

HP BladeSystem c3000 Enclosure – Rack	HP BladeSystem c3000 Enclosure – Tower
Power supply bay numbering

Power Supplies & Fans must be placed in the following bays
Number of Fans	Fan Bays Used
4	2,4,5, 6
6	all bays filled
Number of Power Supplies (for PS Redundant or non-redundant mode)	Power Supply Bays Used
2	1 & 2
3	1, 2, & 3
4	1, 2, 3, 4
5	1 through 5
6	All bays
Number of Power Supplies (For AC Redundant mode)	Place Power Supplies in bays:
2	1 & 4
4	1, 2, 4, & 5
6	all bays filled
NOTE: With four fans, the enclosure will support only 4 half-Height Server blades in the bottom half of the enclosure device bays. With six fans, all 8 server bays may be filled. NOTE: For correct operation, fans and server blades must be installed in the correct bays. The Onboard Administrator will ensure that fans and blades are correctly placed before allowing systems to power on.

Half-height server blade bay numbering

HP BladeSystem c3000 Enclosure – Racks		HP BladeSystem c3000 Enclosure – Tower
1.	Device Bay 1	1.	Device Bay 1
2.	Device Bay 2	2.	Device Bay 2
3.	Device Bay 3	3.	Device Bay 3
4.	Device Bay 4	4.	Device Bay 4
5.	Device Bay 5	5.	Device Bay 5
6.	Device Bay 6	6.	Device Bay 6
7.	Device Bay 7	7.	Device Bay 7
8.	Device Bay 8	8.	Device Bay 8
NOTE: Half-height server blades should be populated from the bottom half of the enclosure, in the following order (bays 1, 5, 2, 6, 3, 7, 4, & 8)

Full-height server blade bay numbering

HP BladeSystem c3000 Enclosure – Racks		HP BladeSystem c3000 Enclosure – Tower
1.	Device Bay 1	1.	Device Bay 1
2.	Device Bay 2	2.	Device Bay 2
3.	Device Bay 3	3.	Device Bay 3
4.	Device Bay 4	4.	Device Bay 4
NOTE: Full-height servers should be populated from the bottom to the top (bays 1 thru 4). With four fans, only the bottom 2 bays can be used; with six fans, all bays can be used.

Mixed Configuration – Full Height and Half Height Population

The c3000 enclosure is divided into 2 zones or quadrants by the horizontal (vertical on Tower model) support metalwork. Zone 1 includes bays 1, 2, 5, and 6; Zone 2 contains bays 3, 4, 7, and 8. Within each zone a removable divider is used to support half height devices. To install a full-height blade in any zone this divider must be removed. An optional mini-divider support bracket is included with every c3000 enclosure. As a consequence of using the mini-divider in the Zone 2, this zone can only contain one full height blade and 2 half-height blades. Zone 1 can contain either 4 half-height blades, or by removing the divider, it can contain 2 full-height blades.

NOTE: Please read the RTF card (included with each c3000 enclosure) and the "HP BladeSystem c3000 Setup and Installation Guide" for more information on using bay dividers and the mini-divider for mixed configurations.

NOTE: Storage or tape blades can be installed in the same zone as both full-height and half-height blades, a bracket ships with each SB40c that allows a half-height blade to be mounted to the left side of a storage or tape blade.

NOTE: In this case, the SB40c or tape blade cannot be removed without first removing the half height blade and mounting bracket.

NOTE: For Mixed configurations of full height and half height population rules; please see the c3000 Enclosure installation and users guide at: http://h71028.www7.hp.com/enterprise/cache/316682-0-0-0-121.html

Enclosure Unit – Rack Model	Dimensions (H x W x D) (with bezel)	10.4 x 19.1 x 32.977 in (265 x 485 x 835 mm)
	Weight (approximate)	Maximum (one enclosure with 8 blades and 4 interconnects installed)	300 lb (136 kg)
	Weight (approximate)	Minimum (one enclosure without blades and interconnects)	130 lb (59 kg)
	Input Requirements (per AC power supply)	Rated Line Voltage	90 – 132 VAC 180 – 264 VAC
		Rated Input Current	9.3 A (at 100 VAC) 9.7 A (at 120VAC) 7.8 A (at 200 VAC) 7.2 A (at 208 VAC) 6.8 A (at 220 VAC) 6.2 A (at 240 VAC)
		Rated Input Frequency	47 to 63 Hz
	BTU Rating	Maximum per power supply	2728 BTU/hr (at 100 VAC) 3069 BTU/hr (at 120VAC) 4092 BTU/hr (at 200 to 240 VAC)
	Power Specifications	To review typical system power ratings use the Power Calculator which is available via the online tool located at URL: www.hp.com/go/bladesystem/powercalculator
	Power Supply Output (per power supply)	Rated Steady-State Power	800 W (at 100 VAC) 900 W (at 120 VAC) 1200 W (at 200 to 240 VAC)
	Power Supply Output (per power supply)	Maximum Peak Power	880 W (at 100 VAC) 990 W (at 120 VAC) 1350 W (at 200 to 240 VAC)
	System Inlet Temperature	Operating	10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed. System performance may be reduced if operating with a fan fault or above 30°C (86°F).
	System Inlet Temperature	Non-operating	-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
	Relative Humidity (non-condensing)	Operating	10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non-condensing.
	Relative Humidity (non-condensing)	Non-operating	5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing.
	Altitude	Operating	3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
	Altitude	Non-operating	9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
	Acoustic Noise	Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
		Idle	depends on server configuration & mix of server blades
		Operating	varies by CPU utilization, server configuration, and mix of server blades

Enclosure Unit – Tower Model	Dimensions (H x W x D) (with bezel)	21.29 x 13.48 x 34.43 in (54.08 x 34.24 x 87.45 cm)
	Weight (approximate)	Maximum (all server blades and interconnects installed)	342 lb (155 kg)
	Weight (approximate)	Minimum (2 power supplies & 4 fans, no server blades nor interconnects installed)	192 lb (87.09 kg)
	Input Requirements (per AC power supply)	Rated Line Voltage	90 – 132 VAC 180 - 264 VAC
		Rated Input Current	9.3 A (at 100 VAC) 9.7 A (at 110 VAC) 7.8 A (at 200 VAC) 7.2 A (at 208 VAC) 6.8 A (at 220 VAC) 6.2 A (at 240 VAC)
		Rated Input Frequency	47 to 63 Hz
	BTU Rating	Maximum per power supply	2728 BTU/hr (at 100 VAC) 3069 BTU/hr (at 120VAC) 4092 BTU/hr (at 200 to 240 VAC)
	Power Specifications	To review typical system power ratings use the Power Calculator which is available via the online tool located at URL: : www.hp.com/go/bladesystem/powercalculator
	Power Supply Output (per power supply)	Rated Steady-State Power	800 W (at 100 VAC), 900 W (at 120 VAC) 1200 W (at 200 to 240 VAC)
	Power Supply Output (per power supply)	Maximum Peak Power	880 W (at 100 VAC), 990 W (at 120 VAC) 1350 W (at 200 to 240 VAC)
	System Inlet Temperature	Operating	10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed. System performance may be reduced if operating with a fan fault or above 30°C (86°F).
	System Inlet Temperature	Non-operating	-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
	Relative Humidity (non-condensing)	Operating	10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non-condensing.
	Relative Humidity (non-condensing)	Non-operating	5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing.
	Altitude	Operating	3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
	Altitude	Non-operating	9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
	Acoustic Noise	Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
		Idle	depends on server configuration & mix of server blades
		Operating	varies by CPU utilization, server configuration, and mix of server blades

Option Kits	Power Supply Dimensions	Size	Height: 1.515 in (38.48 mm)
			Width: 3.4 in (86.36 mm)
			Depth: 7.5 in (190.5 mm)
		Weight	2.5 lbs (1.13 kg)
	Fan Option Shipping Dimensions	Size	Height: 8.75 in (223 mm)
			Width: 9.75 in (248 mm)
			Depth: 15.88 in (403 mm)
		Weight	4.0 lbs (1.8 Kg)

NOTE: To review maximum system power ratings for facilities planning purposes use the Active Answers Power Calculator which is available via the online tool located at URL: http://www.hp.com/go/bladesystem/powercalculator

Environment-friendly Products and Approach	End-of-life Management and Recycling	Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner. The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.

The information contained herein is subject to change without notice.

Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries. AMD is a US registered trademark of AMD Corporation.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

DA-12790 23 - Version 23 - November 16, 2009