  |
Overview
|
|
Overview
|
HP L1908wm 19-inch Widescreen LCD Monitor |
|||
 |
|||
|
1.
|
Menu/select: Opens, selects or exits the OSD menu.
|
4.
|
Power LED: fully powered = green; sleep mode =
amber; sleep timer mode = flashing amber.
|
|
2.
|
"-"/Auto: Navigates backward through
the OSD menu and decreases adjustment levels; when the OSD menu is inactive,
activates the auto adjustment feature to optimize the screen image.
|
5.
|
Power: Turns the monitor on or off.
|
|
3.
|
"+": Navigates forward through the OSD
menu and increases adjustment levels.
|
|
|
| |
| Model |
| KA214AA#ABA |
|
|
Technical Specifications
| Panel | Type | 19-in (48.25-cm) Wide-Aspect Active Matrix TFT (thin film transistor) | |
| Viewable Image Area (diagonal) | 19 in (48.25 cm) widescreen; diagonally measured | ||
| Screen Opening (W x H) |
16.1 x 10.1 in (40.98 x 25.67 cm) | ||
| Panel Type | TN | ||
| Aspect Ratio | 16:10 | ||
| Viewing Angle (typical) | Up to 160° horizontal/160° vertical (10:1 minimum contrast ratio) | ||
| Brightness (typical)* | 300 nits (cd/m2) | ||
| Contrast Ratio (typical)* | 1000:1 | ||
| Response Time (typical)* | ≤5 ms (on/off) | ||
| Pixel Pitch | 0.285 mm | ||
| Backlight Lamp Life (to half brightness) |
50 K hours | ||
| * All performance specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower. | |||
| On Screen Display (OSD) Controls | Buttons or Switches | Auto adjust/OSD down, OSD UP, OSD menu select, power | |
| Languages | English, Brazilian Portuguese, French, German, Spanish, Italian, Dutch, and Japanese, S. Chinese | ||
| User Controls | Brightness, contrast, positioning, color temperature (6500k, 9300k, custom), individual color control, serial number, display, clock, clock phase, monitor management, factory reset, zoom, volume control | ||
| Signal Interface/ Performance |
Horizontal Frequency | 24 to 83 kHz | |
| Vertical Frequency | 50 to 76 Hz | ||
| Native Resolution | 1440 x 900 @ 60 Hz (WXGA+) | ||
| Preset VESA Graphic Modes (non-interlaced) | 1280 x 1024 @ 60 Hz and 75 Hz | ||
| 1024 x 768 @ 60 Hz and 75 Hz | |||
| 800 x 600 @ 60 Hz and 75 Hz | |||
| 640 x 480 @ 60 Hz and 75 Hz | |||
| Text Mode | 720 x 400 @ 70 Hz | ||
| Mac Mode | 1152 x 870 @ 75 Hz and 832 x 624 @ 75 Hz | ||
| Sun Mode | 1152 x 900 @ 66 Hz | ||
| Maximum Pixel Clock Speed | 140 MHz (analog input) | ||
| User Programmable Modes | Yes, 10 | ||
| Anti-Glare | Yes | ||
| Anti-Static | Yes | ||
| Default Color Temperature | 6500 K | ||
| Video/Other Inputs |
Plug and Play | Yes | |
| Self Powered USB 2.0 Hub | Yes | ||
| Input Signal | DVI-D connector (DVI cable included); 15-pin D-sub (analog VGA, VGA cable included); HDCP support | ||
| Input Impedance | 75 ohms ± 10% | ||
| Sync Input | TTL separate synch or Composite Sync | ||
| DVI Cable | DVI-D to DVI-D cable | ||
| DVI Cable Length | 5.9 ft (1.8 m) | ||
| VGA Cable | 15 pin D-sub VGA | ||
| VGA Cable Length | 5.9 ft (1.8 m) | ||
| Audio | Speakers | Integrated rear firing | |
| Output power | 2 watt per channel | ||
| Controls | Volume, OSD selectable | ||
| Audio cable | Included, length: 5.9 ft (1.8 m) | ||
| Power | Input Power | Auto-Sensing, 100 to 240 VAC, 50 +/-3 Hz to 60 +/-3 Hz) | |
| Frequency | 45 to 63 Hz | ||
| Typical Power Consumption | 37 watts | ||
| Maximum | 50 watts | ||
| Power Saving | 2 watts standby;1 watt off | ||
| Power Cable Length | 6.2 ft (1.9 m) | ||
| Dimensions (H x W x D) |
Unpacked w/stand | 14.6 x 17.6 x 7.3 in (37.0 x 44.6 x 18.7 cm) | |
| Unpacked w/o stand (head only) |
11.9 x 17.6 x 2.3 in (30.1 x 44.6 x 5.9 cm) | ||
| Packaged | 16.7 x 21.2 x 6.9 in (42.3 x 53.6 x 17.4 cm) | ||
| Weight | Unpacked | 12.4 lb (5.63 kg) | |
| Packaged | 14.2 lb (6.45 kg) | ||
| Mechanical | Tilt Range | -5° to + 30° vertical | |
| Swivel Range | No | ||
| Height Adjustable | No | ||
| Pivot Rotation | No | ||
| Base and Stand | Detachable, ships attached | ||
| Environmental | Temperature
– Operating | 41° to 104° F (5° to 40° C) | ||
| Temperature
– Non-operating | -29° to 140° F (-34° to 60° C) | |||
| Humidity – Operating | 20% to 80% non-condensing | |||
| Humidity
– Non-operating | 5% to 95%, 38.7° C max wet-bulb | |||
| Altitude – Operating | +12,000 ft (3,658 m) | |||
| Altitude
– Non-operating | +40,000 ft (12,192 m) | |||
| Environmental Data | Eco-Label Certifications and Declarations |
This product has received or is in the process of being certified to the following approvals and may be labeled with one or more of these marks:
| ||
| Energy
Consumption in accordance with ENERGY STAR® test method | AC Input Voltage at 100 VAC +/- 5 VAC, 50 Hz +/- 3 Hz | AC Input Voltage at 115 VAC +/- 5 VAC, 60 Hz +/- 3 Hz | AC Input Voltage at 230 VAC +/- 5 VAC, 50 Hz +/- 3 Hz | |
| Normal Operation | 36 watts | 37 watts | 37 watts | |
| Sleep | 2 watts | 2 watts | 2 watts | |
| Off | 1 watt | 1 watt | 1 watt | |
| Heat Dissipation* | AC Input Voltage at 100 VAC +/- 5 VAC, 50 Hz +/- 3 Hz | AC Input Voltage at 115 VAC +/- 5 VAC, 60 Hz +/- 3 Hz | AC Input Voltage at 230 VAC +/- 5 VAC, 50 Hz +/- 3 Hz | |
| Normal Operation | 123 BTU/hr | 123 BTU/hr | 123 BTU/hr | |
| Sleep | 6.82 BTU/hr | 6.82 BTU/hr | 6.82 BTU/hr | |
| Off | 3.41 BTU/hr | 3.41 BTU/hr | 3.41 BTU/hr | |
| * Heat dissipation is calculated based on the measured watts, assuming the service level is attained for one hour. | ||||
| Ergonomics | The monitor meets the ergonomic requirement of EN-ISO 13406-2 for flat panel displays. | |||
| Additional Information |
This product is in compliance with the Restrictions of Hazardous Substances (RoHS) Directive, 2002/95/EC. This HP product is designed to comply with the Waste Electrical and Electronic Equipment (WEEE) Directive, 2002/96/EC. This product is in compliance with California Proposition 65 (State of California; Safe Drinking Water and Toxic Enforcement Act of 1986). This product is in compliance with the IEEE 1680 (EPEAT) standard at the Silver level, see: www.epeat.net. Plastics parts weighing over 25 grams used in the product are marked per ISO 11469 and ISO1043. Display meets the requirement for low frequency electromagnetic fields per TCO and prEN50279 A/B/C. This product contains 0% recycled materials (by wt.) This product is 95% recyclable when properly disposed of at end of life. Packaging Materials
| |||
| Material Usage |
This product does not contain any of the following substances in excess of
regulatory limits refer to the HP General Specification for the Environment at:
www.hp.com/hpinfo/globalcitizenship/environment/
| |||
| Packaging |
HP follows these guidelines to decrease the environmental impact of product packaging:
| |||
| End-of-life Management and Recycling | Hewlett-Packard offers end-of-life HP product return and recycling programs in many geographic areas. To recycle your product, please go to: www.hp.com/recycle or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner. | |||
| Hewlett-Packard Corporate Environmental Information | For
more information about HP's commitment to the environment: Global Citizenship Report www.hp.com/hpinfo/globalcitizenship/gcreport/index.html Eco-label certifications www.hp.com/hpinfo/globalcitizenship/environment/productdesign/ ecolabels.html ISO 14001 certificates: www.hp.com/hpinfo/globalcitizenship/environment/ operations/envmanagement.html | |||
| Options | HP LCD Monitor Quick Release—Part number EM870AA* | An easy-to-use, VESA-compliant, LCD monitor mounting solution that allows you to quickly and securely attach a flat panel monitor to a variety of stands, brackets, arms or wall mounts. For more information, refer to this product's QuickSpecs document. |
| HP Integrated Work Center Stand-Part number GN783AA | Allows mounting of a 17-, 19-, or 22-inch diagonal HP LCD monitor and an HP Compaq dc7800 or dc7900 Ultra-slim Desktop PC or HP t5000 series Thin Client on a single stand for the convenience of an "all-in-one" form factor. Sold separately. For more information, refer to this product's QuickSpecs document. | |
| HP Security Lock-Part number PC766A | Combines aircraft-grade steel and Kevlar fiber to securely lock down your monitor and help prevent theft. | |
| * The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) depending upon the mounting configuration used. Please note this is a total weight limit for all devices mounted, i.e. the combined weight of the monitor and a second device such an HP Thin Client cannot exceed 24 pounds. Because mounting surfaces vary widely and the final mounting method and configuration may vary, mounting fasteners are not supplied (other than the VESA-compliant screws). HP recommends that you consult with a qualified engineering, architectural or construction professional to determine the appropriate type and quantity of mounting fasteners required for your application and to ensure that your mounting solution is properly installed to support applied loads. | ||
| Other | Accessories Included | VGA cable - connects the graphic card's VGA connector to the monitor's VGA input, DVI-D to DVI-D cable - connects the graphic card's DVI connector to the monitor's DVI input; Audio cable - connects the audio out jack on the PC to audio in jack on the monitor. |
| Software | HP Display Assistant is a software utility that allows monitor adjustment and color calibration using the Display Data Channel Command Interface (DDC/CI) protocol of the connected PC. | |
| HP Display LiteSaver allows you to schedule Sleep mode at preset times to help protect the monitor against image retention, drastically lower power consumption and energy costs, and extend the lifespan of the monitor. | ||
| User Guide Languages | English, B. Portuguese, French, LA Spanish, Korean, S. Chinese, T. Chinese, Bahasa, Japanese, Danish, Finnish, German, Norwegian, Spanish, Swedish, Greek, Polish, Russian, Slovenian, Turkish | |
| Warranty Languages | English, Canadian French, LA Spanish, Brazilian Portuguese, Danish, German, Castilian Spanish, French, Italian, Dutch, Norwegian, Finnish, Swedish, Bahasa Indonesian, Korean, T. Chinese, S. Chinese | |
| Color | Carbonite/Silver, All carbonite (NA only) | |
| VESA External Mounting | Yes (Two sets of Standard 4 hole pattern, 100 mm) Use of the top VESA 4 hole pattern will allow the user to set monitor head lower to the desk surface | |
| Kensington Lock-ready | Yes | |
| Certification and Compliance | TCO'03, ISO 13406-2 VDT Guidelines Approval, CISPR Requirements, VCCI Approvals, MIC (Korean) Requirements, CSA, Australian ACA Approval, “GS” Mark, TUV Approvals, CE Marking, FCC Approval, ENERGY STAR® qualified, PC-2001 Certified, Microsoft® Windows® Certification (Microsoft® Windows® 98, Microsoft Windows 2000, Microsoft Windows XP, and Windows Vista® Premium), EPEAT™ Silver |
 |
| Compatibility | Compatible with platforms using the VESA standard video modes. Recommended for use with HP products. | |
| Service and Warranty | Three years parts, labor, and on-site service. 24-hour, 90-day, toll-free technical support. Replacement options may include second business day on-site service, or next business day direct replacement, at HP's sole discretion.* With direct replacement, HP will ship a replacement display product directly to you. Using the prepaid shipping labels provided, return your failed display to HP in the same packaging as the replacement. Certain restrictions and exclusions apply. For details see your product warranty or contact HP Customer Support. | |
| * Service levels and response times for HP Care Packs may vary depending on your geographic location. Restrictions and limitations apply. For details, visit www.hp.com/go/carepack. | ||
| | ||
|
© Copyright 2009 Hewlett-Packard Development Company, L.P. |