[an error occurred while processing this directive] [an error occurred while processing this directive]
hp.com home
 End of Jump to page title
How to do a soft reset on iPAQ H3800, H3700, H3600, or H3100 series handheld
Jump to content

[an error occurred while processing this directive] Content starts here
 
Last Updated: 2002-05-08 Solution-id: 400.0.2227386.3310660
Objective:
How to do a soft reset on iPAQ H3800, H3700, H3600, or H3100 series handheld
How to do a normal reset on iPAQ H3800, H3700, H3600, or H3100 series handheld
Environment:
iPAQ 3100 Series
iPAQ 3600 Series
iPAQ 3700 Series
iPAQ 3800 Series
iPAQ Handheld
Windows Pocket PC 2000
Windows Pocket PC 2002
Solution:
Warning:
When resetting the iPAQ, please do not hold down the reset button for more than 2 seconds otherwise your data in the RAM may be erased.

To perform a soft reset on the iPAQ please do the following:

1. The power must be on.
2. Look along curved bottom edge
3. Look at to right of cradle docking connector
(If viewed from either the front or with screen pointing up)
4. Locate small round hole
5. Use the tip of the stylus to press the recessed reset button.
6. The device will automatically restart.

A normal reset if done properly will not erase data stored in RAM.
buy online or call 1.800.AT.COMPAQ
[an error occurred while processing this directive]